##############################################################################
##############################################################################
###
### Running command:
###
###   F:\biocbuild\bbs-3.16-bioc\R\bin\R.exe CMD check --no-multiarch --install=check:dasper.install-out.txt --library=F:\biocbuild\bbs-3.16-bioc\R\library --no-vignettes --timings dasper_1.8.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory 'F:/biocbuild/bbs-3.16-bioc/meat/dasper.Rcheck'
* using R version 4.2.2 (2022-10-31 ucrt)
* using platform: x86_64-w64-mingw32 (64-bit)
* using session charset: UTF-8
* using option '--no-vignettes'
* checking for file 'dasper/DESCRIPTION' ... OK
* this is package 'dasper' version '1.8.0'
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .BBSoptions
These were most likely included in error. See section 'Package
structure' in the 'Writing R Extensions' manual.
* checking for portable file names ... OK
* checking whether package 'dasper' can be installed ... NOTE
Found the following notes/warnings:
  Non-staged installation was used
See 'F:/biocbuild/bbs-3.16-bioc/meat/dasper.Rcheck/00install.out' for details.
* checking installed package size ... OK
* checking package directory ... OK
* checking 'build' directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking R files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking dependencies in R code ... NOTE
Unexported object imported by a ':::' call: 'grid:::calcControlPoints'
  See the note in ?`:::` about the use of this operator.
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... NOTE
.classify_junc: no visible binding for global variable 'lend'
.classify_junc: no visible binding for global variable 'rstart'
.coverage_to_plot_get: no visible binding for global variable '.'
.coverage_to_plot_get: no visible binding for global variable
  'case_control'
.get_ref_exons_annot: no visible binding for global variable '.'
.plot_coverage: no visible binding for global variable 'case_control'
.plot_junctions: no visible binding for global variable 'size'
annotate_junc_ref: no visible global function definition for
  'ensemblGenome'
annotate_junc_ref: no visible global function definition for
  'basedir<-'
annotate_junc_ref: no visible global function definition for 'read.gtf'
annotate_junc_ref: no visible global function definition for
  'getSpliceTable'
Undefined global functions or variables:
  . basedir<- case_control ensemblGenome getSpliceTable lend read.gtf
  rstart size
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking contents of 'data' directory ... OK
* checking data for non-ASCII characters ... OK
* checking LazyData ... OK
* checking data for ASCII and uncompressed saves ... OK
* checking line endings in shell scripts ... OK
* checking files in 'vignettes' ... OK
* checking examples ... OK
Examples with CPU (user + system) or elapsed time > 5s
                   user system elapsed
coverage_process 124.63  29.36  164.67
junction_process  57.72   2.20   60.03
plot_sashimi      32.19   0.89   33.34
ref_load          10.65   0.44   11.33
* checking for unstated dependencies in 'tests' ... OK
* checking tests ...
  Running 'testthat.R'
 ERROR
Running the tests in 'tests/testthat.R' failed.
Last 13 lines of output:
       ▆
    1. ├─testthat::expect_identical(x, .chr_check(x, "chr")) at test-utils.R:89:4
    2. │ └─testthat::quasi_label(enquo(expected), expected.label, arg = "expected")
    3. │   └─rlang::eval_bare(expr, quo_get_env(quo))
    4. ├─dasper:::.chr_check(x, "chr")
    5. │ └─stringr::str_detect(seqnames(x), "chr")
    6. │   └─stringr:::check_lengths(string, pattern)
    7. │     └─vctrs::vec_size_common(...)
    8. └─vctrs:::stop_scalar_type(`<fn>`(`<Rle>`), "string", `<env>`)
    9.   └─vctrs:::stop_vctrs(...)
   10.     └─rlang::abort(message, class = c(class, "vctrs_error"), ..., call = vctrs_error_call(call))
  
  [ FAIL 2 | WARN 2 | SKIP 1 | PASS 203 ]
  Error: Test failures
  Execution halted
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in 'inst/doc' ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

Status: 1 ERROR, 4 NOTEs
See
  'F:/biocbuild/bbs-3.16-bioc/meat/dasper.Rcheck/00check.log'
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   F:\biocbuild\bbs-3.16-bioc\R\bin\R.exe CMD INSTALL dasper
###
##############################################################################
##############################################################################


* installing to library 'F:/biocbuild/bbs-3.16-bioc/R/library'
* installing *source* package 'dasper' ...
** using non-staged installation via StagedInstall field
** R
** data
*** moving datasets to lazyload DB
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded
* DONE (dasper)

R version 4.2.2 (2022-10-31 ucrt) -- "Innocent and Trusting"
Copyright (C) 2022 The R Foundation for Statistical Computing
Platform: x86_64-w64-mingw32/x64 (64-bit)

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> library(testthat)
> library(dasper)
> 
> test_check("dasper")
Starting 2 test processes
[ FAIL 2 | WARN 2 | SKIP 1 | PASS 203 ]

══ Skipped tests ═══════════════════════════════════════════════════════════════
• On CRAN (1)

══ Failed tests ════════════════════════════════════════════════════════════════
── Error ('test-plot_sashimi.R:343'): (code run outside of `test_that()`) ──────
<vctrs_error_scalar_type/vctrs_error/rlang_error/error/condition>
Error in `stringr::str_detect(seqnames(x), "chr")`: `string` must be a vector, not a <Rle> object.
Backtrace:
     ▆
  1. ├─dasper:::.coverage_to_plot_get(...) at test-plot_sashimi.R:343:0
  2. │ ├─... %>% ...
  3. │ └─dasper:::.coverage_load(...)
  4. │   └─dasper:::.chr_check(regions, chr_format)
  5. │     └─stringr::str_detect(seqnames(x), "chr")
  6. │       └─stringr:::check_lengths(string, pattern)
  7. │         └─vctrs::vec_size_common(...)
  8. ├─dplyr::tibble(...)
  9. │ └─tibble:::tibble_quos(xs, .rows, .name_repair)
 10. │   └─rlang::eval_tidy(xs[[j]], mask)
 11. ├─base::unlist(.)
 12. └─vctrs:::stop_scalar_type(`<fn>`(`<Rle>`), "string", `<env>`)
 13.   └─vctrs:::stop_vctrs(...)
 14.     └─rlang::abort(message, class = c(class, "vctrs_error"), ..., call = vctrs_error_call(call))
── Error ('test-utils.R:89'): .chr_check has correct output ────────────────────
<vctrs_error_scalar_type/vctrs_error/rlang_error/error/condition>
Error in `stringr::str_detect(seqnames(x), "chr")`: `string` must be a vector, not a <Rle> object.
Backtrace:
     ▆
  1. ├─testthat::expect_identical(x, .chr_check(x, "chr")) at test-utils.R:89:4
  2. │ └─testthat::quasi_label(enquo(expected), expected.label, arg = "expected")
  3. │   └─rlang::eval_bare(expr, quo_get_env(quo))
  4. ├─dasper:::.chr_check(x, "chr")
  5. │ └─stringr::str_detect(seqnames(x), "chr")
  6. │   └─stringr:::check_lengths(string, pattern)
  7. │     └─vctrs::vec_size_common(...)
  8. └─vctrs:::stop_scalar_type(`<fn>`(`<Rle>`), "string", `<env>`)
  9.   └─vctrs:::stop_vctrs(...)
 10.     └─rlang::abort(message, class = c(class, "vctrs_error"), ..., call = vctrs_error_call(call))

[ FAIL 2 | WARN 2 | SKIP 1 | PASS 203 ]
Error: Test failures
Execution halted