#!/bin/sh # test we are root if [ "$(id -u)" != "0" ]; then echo "run as root now exitting" exit 1 fi # due to my lack of RAM addresses kernel module built on qemu for TC32 # only the packaging done on real TC32 FW=rtl8188eufw.bin P=rtl8188eu-6.1.2-tinycore SRC=rtl8188eu-gitMay4 USER=`cat /etc/sysconfig/tcuser` WL=/usr/local/lib/modules/6.1.2-tinycore/kernel/drivers/net/wireless MOD=8188eu.ko.gz USER=`cat /etc/sysconfig/tcuser` LIST="compiletc submitqc git bc wireless-6.1.2-tinycore firmware-rtlwifi" for Z in $LIST do su -c "tce-load -i $Z" $USER done # no need to check for la files grab the 64 bit source, it compiles on TC32 cd /tmp URL=http://repo.tinycorelinux.net/14.x/x86_64/tcz/src/rtl8188eu su -c "wget $URL/rtl8188eu.tar.gz \ $URL/20230314-k-v6.3-rc2.patch " $USER tar xvf $P.tar.gz mv $P $SRC # save src and inject into qemu TC32 and continue with a # kernel prepped /usr/src/* dir and sym link ln -s /usr/src/linux-6.1.2 /lib/modules/6.1.2-tinycore64/build # module fails to build correctly until I do this modprobe cfg80211 # its a dep of 8188eu cd $SRC patch -p1 < ../20230314-k-v6.3-rc2.patch make all # 3 minutes....not stripped to reduce failures # mkdir -p /lib/modules/6.1.2-tinycore/kernel/drivers/net/wireless # make install cd /tmp # save 8188eu.ko and copy back into real TC32 for below under /tmp # TCE ##### # no instructions for unpack copy of firmware-rlwifi # no instructions for unpack of wireless-6.1.2-tinycore chown root:root 8188eu.ko LICENCE.rtlwifi_firmware.txt rtl8188eufw.bin chmod 644 rtl8188eufw.bin mkdir -p $P/$WL mkdir -p $P/usr/local/lib/firmware/rtlwifi gzip /tmp/8188eu.ko cp /tmp/$MOD $P/$WL cp /tmp/$FW $P/usr/local/lib/firmware/rtlwifi # tce.install ############# mkdir -p $P/usr/local/tce.installed cat >> $P/usr/local/tce.installed/$P <<'EOF' #!/bin/sh /sbin/udevadm trigger depmod -a 6.1.2-tinycore modprobe 8188eu EOF chown -R root:staff $P/usr/local/tce.installed chmod -R 775 $P/usr/local/tce.installed mkdir -p $P/usr/local/share/doc/$P echo 'GPL v2' > $P/usr/local/share/doc/$P/COPYING cp $SRC/README.md $P/usr/local/share/doc/$P/README.txt cp LICENCE.rtl* $P/usr/local/share/doc/$P/ # TCZ them ####### LIST="$P " for Z in $LIST do mksquashfs $Z $Z.tcz md5sum $Z.tcz > $Z.tcz.md5.txt cd $Z find usr -not -type d > /tmp/$Z.tcz.list find lib -not -type d >> /tmp/$Z.tcz.list sed 's|usr|/usr|g' -i /tmp/$Z.tcz.list sed 's|lib|/lib|g' -i /tmp/$Z.tcz.list sed 's|//|/|g' -i /tmp/$Z.tcz.list cd /tmp done ls -hal echo 'Title: rtl8188eu-6.1.2-tinycore.tcz Description: wifi kernel module & fw for below devices Version: module: git-May4 fw: Jan17 Author: module: Ivan Ovborislav fw: Realtek Semiconductor Corporation Original-site: module: https://github.com/ivanovborislav/rtl8188eu fw: https://git.kernel.org/pub/scm/linux/\ kernel/git/firmware/linux-firmware.git Copying-policy: module: GPL v2 fw: accompanied Size: 724K Extension_by: aus9 Tags: wifi wlan wireless Comments: fw=firmware Supported class N USB wireless devices TP-Link TL-WN722N V2/V3 High Gain TP-Link TL-WN727N V5.20 TP-Link TL-WN725N V3 Nano EDIMAX EW-7811Un V2 4 Nano ASUS USB-N10 Nano B1 D-Link DWA-125 (rev.D) D-Link DWA-123 (rev.D) D-Link GO-USB-N150 Easy (rev.B) D-Link DWA-121 (rev.B) Realtek RTL8188EU Realtek RTL8188ETV 802.11bgn Mini ELECOM WDC-150SU2M Sitecom WLA-1100 V2 MERCUSYS MW150US V2 Nano Rosewill RNX-N150NUB Nano simple instructions - insert dongle first pls $ sudo ifconfig eth0 down # cable can remain connected $ tce-load -i wifi rtl8188eu $ sudo wifi.sh # and follow prompts For module parameters, ids etc $ modinfo 8188eu If you need power, managed mode etc see README.txt in /usr/local/share/doc/8188eu dir Those commands will need more TCEs downloaded and installed Optional dependency- wireless-db.tcz -read its info please dmesg outputs a lot of info. Change-log: 2023/09/28 2reduce deps-fw added on 14.x Current: 2023/09/28 ' > $P.tcz.info echo 'wireless-6.1.2-tinycore.tcz' > $P.tcz.dep