#!/bin/sh
[ -z "$ENVCLEANED" ] && exec /usr/bin/env -i ENVCLEANED=1 HOME="$HOME" \
LC_ALL=en_US.UTF-8 \
TERM=$TERM \
http_proxy="$http_proxy" https_proxy="$https_proxy" ftp_proxy="$ftp_proxy" \
no_proxy="$no_proxy" all_proxy="$all_proxy" GIT_PROXY_COMMAND="$GIT_PROXY_COMMAND" "$0" "$@"
[ -f /etc/environment ] && . /etc/environment
export PATH=`echo "$PATH" | sed -e 's/:\.//' -e 's/::/:/'`
INST_ARCH=$(uname -m | sed -e "s/i[3-6]86/ix86/" -e "s/x86[-_]64/x86_64/")
SDK_ARCH=$(echo x86_64 | sed -e "s/i[3-6]86/ix86/" -e "s/x86[-_]64/x86_64/")
verlte () {
[ "$1" = "`printf "$1\n$2" | sort -V | head -n1`" ]
}
verlt() {
[ "$1" = "$2" ] && return 1 || verlte $1 $2
}
verlt `uname -r` 2.6.32
if [ $? = 0 ]; then
echo "Error: The SDK needs a kernel > 2.6.32"
exit 1
fi
if [ "$INST_ARCH" != "$SDK_ARCH" ]; then
# Allow for installation of ix86 SDK on x86_64 host
if [ "$INST_ARCH" != x86_64 -o "$SDK_ARCH" != ix86 ]; then
echo "Error: Incompatible SDK installer! Your host is $INST_ARCH and this SDK was built for $SDK_ARCH hosts."
exit 1
fi
fi
if ! xz -V > /dev/null 2>&1; then
echo "Error: xz is required for installation of this SDK, please install it first"
exit 1
fi
DEFAULT_INSTALL_DIR="/opt/b2qt/2.2.2"
SUDO_EXEC=""
EXTRA_TAR_OPTIONS=""
target_sdk_dir=""
answer=""
relocate=1
savescripts=0
verbose=0
publish=0
listcontents=0
while getopts ":yd:npDRSl" OPT; do
case $OPT in
y)
answer="Y"
;;
d)
target_sdk_dir=$OPTARG
;;
n)
prepare_buildsystem="no"
;;
p)
prepare_buildsystem="no"
publish=1
;;
D)
verbose=1
;;
R)
relocate=0
savescripts=1
;;
S)
savescripts=1
;;
l)
listcontents=1
;;
*)
echo "Usage: $(basename $0) [-y] [-d
]"
echo " -y Automatic yes to all prompts"
echo " -d Install the SDK to "
echo "======== Extensible SDK only options ============"
echo " -n Do not prepare the build system"
echo " -p Publish mode (implies -n)"
echo "======== Advanced DEBUGGING ONLY OPTIONS ========"
echo " -S Save relocation scripts"
echo " -R Do not relocate executables"
echo " -D use set -x to see what is going on"
echo " -l list files that will be extracted"
exit 1
;;
esac
done
payload_offset=$(($(grep -na -m1 "^MARKER:$" $0|cut -d':' -f1) + 1))
if [ "$listcontents" = "1" ] ; then
tail -n +$payload_offset $0| tar tvJ || exit 1
exit
fi
titlestr="Boot to Qt for Embedded Linux SDK installer version 2.2.2"
printf "%s\n" "$titlestr"
printf "%${#titlestr}s\n" | tr " " "="
if [ $verbose = 1 ] ; then
set -x
fi
# SDK_EXTENSIBLE is exposed from the SDK_PRE_INSTALL_COMMAND above
if [ "$SDK_EXTENSIBLE" = "1" ]; then
DEFAULT_INSTALL_DIR="~/b2qt_sdk"
fi
if [ "$target_sdk_dir" = "" ]; then
if [ "$answer" = "Y" ]; then
target_sdk_dir="$DEFAULT_INSTALL_DIR"
else
read -p "Enter target directory for SDK (default: $DEFAULT_INSTALL_DIR): " target_sdk_dir
[ "$target_sdk_dir" = "" ] && target_sdk_dir=$DEFAULT_INSTALL_DIR
fi
fi
eval target_sdk_dir=$(echo "$target_sdk_dir"|sed 's/ /\\ /g')
if [ -d "$target_sdk_dir" ]; then
target_sdk_dir=$(cd "$target_sdk_dir"; pwd)
else
target_sdk_dir=$(readlink -m "$target_sdk_dir")
fi
# limit the length for target_sdk_dir, ensure the relocation behaviour in relocate_sdk.py has right result.
if [ ${#target_sdk_dir} -gt 2048 ]; then
echo "Error: The target directory path is too long!!!"
exit 1
fi
if [ "$SDK_EXTENSIBLE" = "1" ]; then
# We're going to be running the build system, additional restrictions apply
if echo "$target_sdk_dir" | grep -q '[+\ @$]'; then
echo "The target directory path ($target_sdk_dir) contains illegal" \
"characters such as spaces, @, \$ or +. Abort!"
exit 1
fi
# The build system doesn't work well with /tmp on NFS
fs_dev_path="$target_sdk_dir"
while [ ! -d "$fs_dev_path" ] ; do
fs_dev_path=`dirname $fs_dev_path`
done
fs_dev_type=`stat -f -c '%t' "$fs_dev_path"`
if [ "$fsdevtype" = "6969" ] ; then
echo "The target directory path $target_sdk_dir is on NFS, this is not possible. Abort!"
exit 1
fi
else
if [ -n "$(echo $target_sdk_dir|grep ' ')" ]; then
echo "The target directory path ($target_sdk_dir) contains spaces. Abort!"
exit 1
fi
fi
if [ -e "$target_sdk_dir/environment-setup-aarch64-poky-linux" ]; then
echo "The directory \"$target_sdk_dir\" already contains a SDK for this architecture."
printf "If you continue, existing files will be overwritten! Proceed[y/N]? "
default_answer="n"
else
printf "You are about to install the SDK to \"$target_sdk_dir\". Proceed[Y/n]? "
default_answer="y"
fi
if [ "$answer" = "" ]; then
read answer
[ "$answer" = "" ] && answer="$default_answer"
else
echo $answer
fi
if [ "$answer" != "Y" -a "$answer" != "y" ]; then
echo "Installation aborted!"
exit 1
fi
# Try to create the directory (this will not succeed if user doesn't have rights)
mkdir -p $target_sdk_dir >/dev/null 2>&1
# if don't have the right to access dir, gain by sudo
if [ ! -x $target_sdk_dir -o ! -w $target_sdk_dir -o ! -r $target_sdk_dir ]; then
if [ "$SDK_EXTENSIBLE" = "1" ]; then
echo "Unable to access \"$target_sdk_dir\", will not attempt to use" \
"sudo as as extensible SDK cannot be used as root."
exit 1
fi
SUDO_EXEC=$(which "sudo")
if [ -z $SUDO_EXEC ]; then
echo "No command 'sudo' found, please install sudo first. Abort!"
exit 1
fi
# test sudo could gain root right
$SUDO_EXEC pwd >/dev/null 2>&1
[ $? -ne 0 ] && echo "Sorry, you are not allowed to execute as root." && exit 1
# now that we have sudo rights, create the directory
$SUDO_EXEC mkdir -p $target_sdk_dir >/dev/null 2>&1
fi
printf "Extracting SDK..."
tail -n +$payload_offset $0| $SUDO_EXEC tar xJ -C $target_sdk_dir --checkpoint=.2500 $EXTRA_TAR_OPTIONS || exit 1
echo "done"
printf "Setting it up..."
# fix environment paths
real_env_setup_script=""
for env_setup_script in `ls $target_sdk_dir/environment-setup-*`; do
if grep -q 'OECORE_NATIVE_SYSROOT=' $env_setup_script; then
# Handle custom env setup scripts that are only named
# environment-setup-* so that they have relocation
# applied - what we want beyond here is the main one
# rather than the one that simply sorts last
real_env_setup_script="$env_setup_script"
fi
$SUDO_EXEC sed -e "s:/opt/b2qt/2.2.2:$target_sdk_dir:g" -i $env_setup_script
done
if [ -n "$real_env_setup_script" ] ; then
env_setup_script="$real_env_setup_script"
fi
if ! xargs --version > /dev/null 2>&1; then
echo "xargs is required by the relocation script, please install it first. Abort!"
exit 1
fi
# fix dynamic loader paths in all ELF SDK binaries
native_sysroot=$($SUDO_EXEC cat $env_setup_script |grep 'OECORE_NATIVE_SYSROOT='|cut -d'=' -f2|tr -d '"')
dl_path=$($SUDO_EXEC find $native_sysroot/lib -name "ld-linux*")
if [ "$dl_path" = "" ] ; then
echo "SDK could not be set up. Relocate script unable to find ld-linux.so. Abort!"
exit 1
fi
executable_files=$($SUDO_EXEC find $native_sysroot -type f \
\( -perm -0100 -o -perm -0010 -o -perm -0001 \) -printf "'%h/%f' ")
if [ "x$executable_files" = "x" ]; then
echo "SDK relocate failed, could not get executalbe files"
exit 1
fi
tdir=`mktemp -d`
if [ x$tdir = x ] ; then
echo "SDK relocate failed, could not create a temporary directory"
exit 1
fi
cat <> $tdir/relocate_sdk.sh
#!/bin/sh
for py in python python2 python3
do
PYTHON=\`which \${py} 2>/dev/null\`
if [ \$? -eq 0 ]; then
break;
fi
done
if [ x\${PYTHON} = "x" ]; then
echo "SDK could not be relocated. No python found."
exit 1
fi
\${PYTHON} ${env_setup_script%/*}/relocate_sdk.py $target_sdk_dir $dl_path $executable_files
EOF
$SUDO_EXEC mv $tdir/relocate_sdk.sh ${env_setup_script%/*}/relocate_sdk.sh
$SUDO_EXEC chmod 755 ${env_setup_script%/*}/relocate_sdk.sh
rm -rf $tdir
if [ $relocate = 1 ] ; then
$SUDO_EXEC ${env_setup_script%/*}/relocate_sdk.sh
if [ $? -ne 0 ]; then
echo "SDK could not be set up. Relocate script failed. Abort!"
exit 1
fi
fi
# replace /opt/b2qt/2.2.2 with the new prefix in all text files: configs/scripts/etc.
# replace the host perl with SDK perl.
for replace in "$target_sdk_dir -maxdepth 1" "$native_sysroot"; do
$SUDO_EXEC find $replace -type f
done | xargs -n100 file | grep ":.*\(ASCII\|script\|source\).*text" | \
awk -F':' '{printf "\"%s\"\n", $1}' | \
grep -Ev "$target_sdk_dir/(environment-setup-*|relocate_sdk*|${0##*/})" | \
xargs -n100 $SUDO_EXEC sed -i \
-e "s:$DEFAULT_INSTALL_DIR:$target_sdk_dir:g" \
-e "s:^#! */usr/bin/perl.*:#! /usr/bin/env perl:g" \
-e "s: /usr/bin/perl: /usr/bin/env perl:g"
if [ $? -ne 0 ]; then
echo "Failed to replace perl. Relocate script failed. Abort!"
exit 1
fi
# change all symlinks pointing to /opt/b2qt/2.2.2
for l in $($SUDO_EXEC find $native_sysroot -type l); do
$SUDO_EXEC ln -sfn $(readlink $l|$SUDO_EXEC sed -e "s:$DEFAULT_INSTALL_DIR:$target_sdk_dir:") $l
if [ $? -ne 0 ]; then
echo "Failed to setup symlinks. Relocate script failed. Abort!"
exit 1
fi
done
echo done
# delete the relocating script, so that user is forced to re-run the installer
# if he/she wants another location for the sdk
if [ $savescripts = 0 ] ; then
$SUDO_EXEC rm -f ${env_setup_script%/*}/relocate_sdk.py ${env_setup_script%/*}/relocate_sdk.sh
fi
echo "SDK has been successfully set up and is ready to be used."
echo "Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g."
for env_setup_script in `ls $target_sdk_dir/environment-setup-*`; do
echo " \$ . $env_setup_script"
done
exit 0
MARKER:
7zXZ i"6š! }[] }J>y&Y0 ~𭄏%QqC+}Gl=u\:pw2f2E .C Daܕ/$Ydk%䳓g4`=I"0ؗPQ%.DDlHr]vtGnmKFKG&QPCUR/I@ $o={n#ӃggJqX>ЭȂW9+v~ 6C!;H,N*%U;^%T3(Y#>V|l{%ԑd߉ڈkp?/KB=Cؐ"+ZoNbfOQs|j:MטiĚͪal>mIvVLZ\AteH+YK,|i82xmU'Α[yrE{*7*Y`6
+i9߳cJU戥l9NW;tp'; A
A·gWа+o{T#lF$nu`o"yU @wKrGGLR`\Y@\['݁#[v.#maiTZlu{QeswɞI@Šp1=QanX]%|"b
[gkK"L*4uC$_ GMg,fbqRPD6DTteΆH;f9*-3M8GJ?GlUEJw,>Y}I79x,.EXuٴT']PƧyd16<h>a