![]() |
![]() |
![]() |
GTK+ Reference Manual | ![]() |
---|---|---|---|---|
#include <gtk/gtk.h> GtkPrintOperation; enum GtkPrintStatus; enum GtkPrintOperationResult; enum GtkPrintError; #define GTK_PRINT_ERROR GtkPrintOperation* gtk_print_operation_new (void); void gtk_print_operation_set_default_page_setup (GtkPrintOperation *op, GtkPageSetup *default_page_setup); GtkPageSetup* gtk_print_operation_get_default_page_setup (GtkPrintOperation *op); void gtk_print_operation_set_print_settings (GtkPrintOperation *op, GtkPrintSettings *print_settings); GtkPrintSettings* gtk_print_operation_get_print_settings (GtkPrintOperation *op); void gtk_print_operation_set_job_name (GtkPrintOperation *op, const gchar *job_name); void gtk_print_operation_set_n_pages (GtkPrintOperation *op, gint n_pages); void gtk_print_operation_set_current_page (GtkPrintOperation *op, gint current_page); void gtk_print_operation_set_use_full_page (GtkPrintOperation *op, gboolean full_page); void gtk_print_operation_set_unit (GtkPrintOperation *op, GtkUnit unit); void gtk_print_operation_set_show_dialog (GtkPrintOperation *op, gboolean show_dialog); void gtk_print_operation_set_pdf_target (GtkPrintOperation *op, const gchar *filename); void gtk_print_operation_set_show_progress (GtkPrintOperation *op, gboolean show_progress); void gtk_print_operation_set_track_print_status (GtkPrintOperation *op, gboolean track_status); void gtk_print_operation_set_custom_tab_label (GtkPrintOperation *op, const gchar *label); GtkPrintOperationResult gtk_print_operation_run (GtkPrintOperation *op, GtkWindow *parent, GError **error); void gtk_print_operation_run_async (GtkPrintOperation *op, GtkWindow *parent); void gtk_print_operation_cancel (GtkPrintOperation *op); GtkPrintStatus gtk_print_operation_get_status (GtkPrintOperation *op); const gchar* gtk_print_operation_get_status_string (GtkPrintOperation *op); gboolean gtk_print_operation_is_finished (GtkPrintOperation *op); GtkPageSetup* gtk_print_run_page_setup_dialog (GtkWindow *parent, GtkPageSetup *page_setup, GtkPrintSettings *settings); void (*GtkPageSetupDoneFunc) (GtkPageSetup *page_setup, gpointer data); void gtk_print_run_page_setup_dialog_async (GtkWindow *parent, GtkPageSetup *page_setup, GtkPrintSettings *settings, GtkPageSetupDoneFunc done_cb, gpointer data);
"current-page" gint : Read / Write "custom-tab-label" gchararray : Read / Write "default-page-setup" GtkPageSetup : Read / Write "job-name" gchararray : Read / Write "n-pages" gint : Read / Write "pdf-target" gchararray : Read / Write "print-settings" GtkPrintSettings : Read / Write "show-dialog" gboolean : Read / Write "show-preview" gboolean : Read / Write "show-progress" gboolean : Read / Write "status" GtkPrintStatus : Read "status-string" gchararray : Read "track-print-status" gboolean : Read / Write "unit" GtkUnit : Read / Write "use-full-page" gboolean : Read / Write
"begin-print" void user_function (GtkPrintOperation *operation, GtkPrintContext *context, gpointer user_data) : Run last "create-custom-widget" gpointer user_function (GtkPrintOperation *operation, gpointer user_data) : Run last "custom-widget-apply" void user_function (GtkPrintOperation *operation, GtkWidget *widget, gpointer user_data) : Run last "draw-page" void user_function (GtkPrintOperation *operation, GtkPrintContext *context, gint page_nr, gpointer user_data) : Run last "end-print" void user_function (GtkPrintOperation *operation, GtkPrintContext *context, gpointer user_data) : Run last "paginate" gboolean user_function (GtkPrintOperation *printoperation, GtkPrintContext *arg1, gpointer user_data) : Run last "preview" gboolean user_function (GtkPrintOperation *operation, GtkPrintOperationPreview *preview, GtkPrintContext *context, GtkWindow *parent, gpointer user_data) : Run last "request-page-setup" void user_function (GtkPrintOperation *operation, GtkPrintContext *context, gint page_nr, GtkPageSetup *setup, gpointer user_data) : Run last "status-changed" void user_function (GtkPrintOperation *operation, gpointer user_data) : Run last
GtkPrintOperation is the high-level, portable printing API. It looks a bit different than other GTK+ dialogs such as the GtkFileChooser, since some platforms don't expose enough infrastructure to implement a good print dialog. On such platforms, GtkPrintOperation uses the native print dialog. On platforms which do not provide a native print dialog, GTK+ uses its own, see GtkPrintUnixDialog.
The typical way to use the high-level printing API is to create a
GtkPrintOperation object with gtk_print_operation_new()
when the user
selects to print. Then you set some properties on it, e.g. the page size,
any GtkPrintSettings from previous print operations, the number of pages,
the current page, etc.
Then you start the print operation by calling gtk_print_operation_run()
.
It will then show a dialog, let the user select a printer and options.
When the user finished the dialog various signals will be emitted on the
GtkPrintOperation, the main one being ::draw-page, which you are supposed
to catch and render the page on the provided GtkPrintContext using Cairo.
Example 1. The high-level printing API
static GtkPrintSettings *settings = NULL; static void do_print (void) { GtkPrintOperation *print; GtkPrintOperationResult res; print = gtk_print_operation_new (); if (settings != NULL) gtk_print_operation_set_print_settings (print, settings); g_signal_connect (print, "begin_print", G_CALLBACK (begin_print), NULL); g_signal_connect (print, "draw_page", G_CALLBACK (draw_page), NULL); res = gtk_print_operation_run (print, GTK_WINDOW (main_window), NULL); if (res == GTK_PRINT_OPERATION_RESULT_APPLY) { if (settings != NULL) g_object_unref (settings); settings = g_object_ref (gtk_print_operation_get_print_settings (print)); } g_object_unref (print); }
Printing support was added in GTK+ 2.10.
typedef enum { GTK_PRINT_STATUS_INITIAL, GTK_PRINT_STATUS_PREPARING, GTK_PRINT_STATUS_GENERATING_DATA, GTK_PRINT_STATUS_SENDING_DATA, GTK_PRINT_STATUS_PENDING, GTK_PRINT_STATUS_PENDING_ISSUE, GTK_PRINT_STATUS_PRINTING, GTK_PRINT_STATUS_FINISHED, GTK_PRINT_STATUS_FINISHED_ABORTED } GtkPrintStatus;
typedef enum { GTK_PRINT_OPERATION_RESULT_ERROR, GTK_PRINT_OPERATION_RESULT_APPLY, GTK_PRINT_OPERATION_RESULT_CANCEL, GTK_PRINT_OPERATION_RESULT_PREVIEW } GtkPrintOperationResult;
typedef enum { GTK_PRINT_ERROR_GENERAL, GTK_PRINT_ERROR_INTERNAL_ERROR, GTK_PRINT_ERROR_NOMEM } GtkPrintError;
#define GTK_PRINT_ERROR gtk_print_error_quark ()
The GQuark used for GtkPrintError errors.
GtkPrintOperation* gtk_print_operation_new (void);
Creates a new GtkPrintOperation.
Returns : | a new GtkPrintOperation |
Since 2.10
void gtk_print_operation_set_default_page_setup (GtkPrintOperation *op, GtkPageSetup *default_page_setup);
Makes default_page_setup
the default page setup for op
.
This page setup will be used by gtk_print_operation_run()
,
but it can be overridden on a per-page basis by connecting
to the ::request-page-setup signal.
op : |
a GtkPrintOperation |
default_page_setup : |
a GtkPageSetup, or NULL
|
Since 2.10
GtkPageSetup* gtk_print_operation_get_default_page_setup (GtkPrintOperation *op);
Returns the default page setup, see
gtk_print_operation_set_default_page_setup()
.
op : |
a GtkPrintOperation |
Returns : | the default page setup |
Since 2.10
void gtk_print_operation_set_print_settings (GtkPrintOperation *op, GtkPrintSettings *print_settings);
Sets the print settings for op
. This is typically used to
re-establish print settings from a previous print operation,
see gtk_print_operation_run()
.
op : |
a GtkPrintOperation |
print_settings : |
GtkPrintSettings, or NULL
|
Since 2.10
GtkPrintSettings* gtk_print_operation_get_print_settings (GtkPrintOperation *op);
Returns the current print settings.
Note that the return value is NULL
until either
gtk_print_operation_set_print_settings()
or
gtk_print_operation_run()
have been called.
op : |
a GtkPrintOperation |
Returns : | the current print settings of op .
|
Since 2.10
void gtk_print_operation_set_job_name (GtkPrintOperation *op, const gchar *job_name);
Sets the name of the print job. The name is used to identify the job (e.g. in monitoring applications like eggcups).
If you don't set a job name, GTK+ picks a default one by numbering successive print jobs.
op : |
a GtkPrintOperation |
job_name : |
a string that identifies the print job |
Since 2.10
void gtk_print_operation_set_n_pages (GtkPrintOperation *op, gint n_pages);
Sets the number of pages in the document.
This must be set to a positive number before the rendering starts. It may be set in a ::begin-print signal hander.
Note that the page numbers passed to the ::request-page-setup
and ::draw-page signals are 0-based, i.e. if the user chooses
to print all pages, the last ::draw-page signal will be
for page n_pages
- 1.
op : |
a GtkPrintOperation |
n_pages : |
the number of pages |
Since 2.10
void gtk_print_operation_set_current_page (GtkPrintOperation *op, gint current_page);
Sets the current page.
If this is called before gtk_print_operation_run()
,
the user will be able to select to print only the current page.
Note that this only makes sense for pre-paginated documents.
op : |
a GtkPrintOperation |
current_page : |
the current page, 0-based |
Since 2.10
void gtk_print_operation_set_use_full_page (GtkPrintOperation *op, gboolean full_page);
If full_page
is TRUE
, the transformation for the cairo context
obtained from GtkPrintContext puts the origin at the top left
corner of the page (which may not be the top left corner of the
sheet, depending on page orientation and the number of pages per
sheet). Otherwise, the origin is at the top left corner of the
imageable area (i.e. inside the margins).
op : |
a GtkPrintOperation |
full_page : |
TRUE to set up the GtkPrintContext for the full page
|
Since 2.10
void gtk_print_operation_set_unit (GtkPrintOperation *op, GtkUnit unit);
Sets up the transformation for the cairo context obtained from
GtkPrintContext in such a way that distances are measured in
units of unit
.
op : |
a GtkPrintOperation |
unit : |
the unit to use |
Since 2.10
void gtk_print_operation_set_show_dialog (GtkPrintOperation *op, gboolean show_dialog);
Sets whether calling gtk_print_operation_run()
will present
a print dialog to the user, or just print to the default printer.
op : |
a GtkPrintOperation |
show_dialog : |
TRUE to show the print dialog
|
Since 2.10
void gtk_print_operation_set_pdf_target (GtkPrintOperation *op, const gchar *filename);
Sets up the GtkPrintOperation to generate a PDF file instead of showing the print dialog. The indended use of this function is for implementing "Export to PDF" actions.
"Print to PDF" support is independent of this and is done by letting the user pick the "Print to PDF" item from the list of printers in the print dialog.
op : |
a GtkPrintOperation |
filename : |
the filename for the PDF file |
Since 2.10
void gtk_print_operation_set_show_progress (GtkPrintOperation *op, gboolean show_progress);
If show_progress
is TRUE
, the print operation will show a
progress dialog during the print operation.
op : |
a GtkPrintOperation |
show_progress : |
TRUE to show a progress dialog
|
Since 2.10
void gtk_print_operation_set_track_print_status (GtkPrintOperation *op, gboolean track_status);
If track_status is TRUE
, the print operation will try to continue report
on the status of the print job in the printer queues and printer. This
can allow your application to show things like "out of paper" issues,
and when the print job actually reaches the printer.
This function is often implemented using some form of polling, so it should not be enabled unless needed.
op : |
a GtkPrintOperation |
track_status : |
TRUE to track status after printing
|
Since 2.10
void gtk_print_operation_set_custom_tab_label (GtkPrintOperation *op, const gchar *label);
op : |
|
label : |
GtkPrintOperationResult gtk_print_operation_run (GtkPrintOperation *op, GtkWindow *parent, GError **error);
Runs the print operation, by first letting the user modify print settings in the print dialog, and then print the document.
Note that this function does not return until the rendering of all
pages is complete. You can connect to the ::status-changed signal on
op
to obtain some information about the progress of the print operation.
Furthermore, it may use a recursive mainloop to show the print dialog.
See gtk_print_operation_run_async()
if this is a problem.
if (settings != NULL)
gtk_print_operation_set_print_settings (print, settings);
if (page_setup != NULL)
gtk_print_operation_set_default_page_setup (print, page_setup);
g_signal_connect (print, "begin-print",
G_CALLBACK (begin_print), &data);
g_signal_connect (print, "draw-page",
G_CALLBACK (draw_page), &data);
res = gtk_print_operation_run (print, parent, &error);
if (res == GTK_PRINT_OPERATION_RESULT_ERROR)
{
error_dialog = gtk_message_dialog_new (GTK_WINDOW (parent),
GTK_DIALOG_DESTROY_WITH_PARENT,
GTK_MESSAGE_ERROR,
GTK_BUTTONS_CLOSE,
"Error printing file:\ns
",
error->message);
g_signal_connect (error_dialog, "response",
G_CALLBACK (gtk_widget_destroy), NULL);
gtk_widget_show (error_dialog);
g_error_free (error);
}
else if (res == GTK_PRINT_OPERATION_RESULT_APPLY)
{
if (settings != NULL)
g_object_unref (settings);
settings = g_object_ref (gtk_print_operation_get_print_settings (print));
}
op : |
a GtkPrintOperation |
parent : |
Transient parent of the dialog, or NULL
|
error : |
Return location for errors, or NULL
|
Returns : | the result of the print operation. A return value of
GTK_PRINT_OPERATION_RESULT_APPLY indicates that the printing was
completed successfully. In this case, it is a good idea to obtain
the used print settings with gtk_print_operation_get_print_settings()
and store them for reuse with the next print operation.
|
Since 2.10
void gtk_print_operation_run_async (GtkPrintOperation *op, GtkWindow *parent);
Runs the print operation, by first letting the user modify print settings in the print dialog, and then print the document.
In contrast to gtk_print_operation_run()
, this function returns after
showing the print dialog on platforms that support this, and handles
the printing by connecting a signal handler to the ::response signal
of the dialog.
If you use this function, it is recommended that you store the modified GtkPrintSettings in a ::begin-print or ::end-print signal handler.
op : |
a GtkPrintOperation |
parent : |
Transient parent of the dialog, or NULL
|
Since 2.10
void gtk_print_operation_cancel (GtkPrintOperation *op);
Cancels a running print operation. This function may be called from a begin-print, paginate or draw-page signal handler to stop the currently running print operation.
op : |
a GtkPrintOperation |
Since 2.10
GtkPrintStatus gtk_print_operation_get_status (GtkPrintOperation *op);
Returns the status of the print operation.
Also see gtk_print_operation_get_status_string()
.
op : |
a GtkPrintOperation |
Returns : | the status of the print operation |
Since 2.10
const gchar* gtk_print_operation_get_status_string (GtkPrintOperation *op);
Returns a string representation of the status of the print operation. The string is translated and suitable for displaying the print status e.g. in a GtkStatusbar.
Use gtk_print_operation_get_status()
to obtain a status
value that is suitable for programmatic use.
op : |
a GtkPrintOperation |
Returns : | a string representation of the status of the print operation |
Since 2.10
gboolean gtk_print_operation_is_finished (GtkPrintOperation *op);
A convenience function to find out if the print operation
is finished, either successfully (GTK_PRINT_STATUS_FINISHED
)
or unsuccessfully (GTK_PRINT_STATUS_FINISHED_ABORTED
).
op : |
a GtkPrintOperation |
Returns : | TRUE , if the print operation is finished.
|
Since 2.10
GtkPageSetup* gtk_print_run_page_setup_dialog (GtkWindow *parent, GtkPageSetup *page_setup, GtkPrintSettings *settings);
Runs a page setup dialog, letting the user modify the values from
page_setup
. If the user cancels the dialog, the returned GtkPageSetup
is identical to the passed in page_setup
, otherwise it contains the
modifications done in the dialog.
Note that this function may use a recursive mainloop to show the page
setup dialog. See gtk_print_run_page_setup_dialog_async()
if this is
a problem.
parent : |
transient parent, or NULL
|
page_setup : |
an existing GtkPageSetup, or NULL
|
settings : |
a GtkPrintSettings |
Returns : | a new GtkPageSetup |
Since 2.10
void (*GtkPageSetupDoneFunc) (GtkPageSetup *page_setup, gpointer data);
page_setup : |
|
data : |
void gtk_print_run_page_setup_dialog_async (GtkWindow *parent, GtkPageSetup *page_setup, GtkPrintSettings *settings, GtkPageSetupDoneFunc done_cb, gpointer data);
Runs a page setup dialog, letting the user modify the values from page_setup
.
In contrast to gtk_print_run_page_setup_dialog()
, this function returns after
showing the page setup dialog on platforms that support this, and calls done_cb
from a signal handler for the ::response signal of the dialog.
parent : |
transient parent, or NULL
|
page_setup : |
an existing GtkPageSetup, or NULL
|
settings : |
a GtkPrintSettings |
done_cb : |
a function to call when the user saves the modified page setup |
data : |
user data to pass to done_cb
|
Since 2.10
current-page
" property"current-page" gint : Read / Write
The current page in the document.
If this is set before gtk_print_operation_run()
,
the user will be able to select to print only the current page.
Note that this only makes sense for pre-paginated documents.
Allowed values: >= -1
Default value: -1
Since 2.10
custom-tab-label
" property"custom-tab-label" gchararray : Read / Write
Used as the label of the tab containing custom widgets. Note that this property may be ignored on some platforms.
If this is NULL
, GTK+ uses a default label.
Default value: NULL
Since 2.10
default-page-setup
" property"default-page-setup" GtkPageSetup : Read / Write
The GtkPageSetup used by default.
This page setup will be used by gtk_print_operation_run()
,
but it can be overridden on a per-page basis by connecting
to the ::request-page-setup signal.
Since 2.10
job-name
" property"job-name" gchararray : Read / Write
A string used to identify the job (e.g. in monitoring applications like eggcups).
If you don't set a job name, GTK+ picks a default one by numbering successive print jobs.
Default value: ""
Since 2.10
n-pages
" property"n-pages" gint : Read / Write
The number of pages in the document.
This must be set to a positive number before the rendering starts. It may be set in a ::begin-print signal hander.
Note that the page numbers passed to the ::request-page-setup
and ::draw-page signals are 0-based, i.e. if the user chooses
to print all pages, the last ::draw-page signal will be for
page n_pages
- 1.
Allowed values: >= -1
Default value: -1
Since 2.10
pdf-target
" property"pdf-target" gchararray : Read / Write
The name of a PDF file to generate instead of showing the print dialog.
The intended use of this property is for implementing "Export to PDF" actions.
"Print to PDF" support is independent of this and is done by letting the user pick the "Print to PDF" item from the list of printers in the print dialog.
Default value: NULL
Since 2.10
print-settings
" property"print-settings" GtkPrintSettings : Read / Write
The GtkPrintSettings used for initializing the dialog.
Setting this property is typically used to re-establish
print settings from a previous print operation, see
gtk_print_operation_run()
.
Since 2.10
show-dialog
" property"show-dialog" gboolean : Read / Write
Determines whether calling gtk_print_operation_run()
will present
a print dialog to the user, or just print to the default printer.
Default value: TRUE
Since 2.10
show-preview
" property"show-preview" gboolean : Read / Write
Determines whether calling gtk_print_operation_run()
will present
the print preview to the user.
Default value: TRUE
Since 2.10
show-progress
" property"show-progress" gboolean : Read / Write
Determines whether to show a progress dialog during the print operation.
Default value: FALSE
Since 2.10
status
" property"status" GtkPrintStatus : Read
The status of the print operation.
Default value: GTK_PRINT_STATUS_INITIAL
Since 2.10
status-string
" property"status-string" gchararray : Read
A string representation of the status of the print operation. The string is translated and suitable for displaying the print status e.g. in a GtkStatusbar.
See the ::status property for a status value that is suitable for programmatic use.
Default value: ""
Since 2.10
track-print-status
" property"track-print-status" gboolean : Read / Write
If TRUE
, the print operation will try to continue report on
the status of the print job in the printer queues and printer.
This can allow your application to show things like "out of paper"
issues, and when the print job actually reaches the printer.
However, this is often implemented using polling, and should
not be enabled unless needed.
Default value: FALSE
Since 2.10
unit
" property"unit" GtkUnit : Read / Write
The transformation for the cairo context obtained from
GtkPrintContext is set up in such a way that distances
are measured in units of unit
.
Default value: GTK_UNIT_PIXEL
Since 2.10
use-full-page
" property"use-full-page" gboolean : Read / Write
If TRUE
, the transformation for the cairo context obtained
from GtkPrintContext puts the origin at the top left corner
of the page (which may not be the top left corner of the sheet,
depending on page orientation and the number of pages per sheet).
Otherwise, the origin is at the top left corner of the imageable
area (i.e. inside the margins).
Default value: FALSE
Since 2.10
void user_function (GtkPrintOperation *operation, GtkPrintContext *context, gpointer user_data) : Run last
Gets emitted after the user has finished changing print settings in the dialog, before the actual rendering starts.
A typical use for this signal is to use the parameters from the
GtkPrintContext and paginate the document accordingly, and then
set the number of pages with gtk_print_operation_set_n_pages()
.
operation : |
the GtkPrintOperation on which the signal was emitted |
context : |
the GtkPrintContext for the current operation |
user_data : |
user data set when the signal handler was connected. |
Since 2.10
gpointer user_function (GtkPrintOperation *operation, gpointer user_data) : Run last
Gets emitted when displaying the print dialog. If you return a widget in a handler for this signal it will be added to a custom tab in the print dialog. You typically return a container widget with multiple widgets in it.
The print dialog owns the returned widget, and its lifetime isn't controlled by the app. However, the widget is guaranteed to stay around until the custom-widget-apply signal is emitted on the operation. Then you can read out any information you need from the widgets.
operation : |
the GtkPrintOperation on which the signal was emitted |
user_data : |
user data set when the signal handler was connected. |
Returns : | A custom widget that gets embedded in the print dialog,
or NULL
|
Since 2.10
void user_function (GtkPrintOperation *operation, GtkWidget *widget, gpointer user_data) : Run last
This signal gets emitted right before begin-print if you added a custom widget in the create-custom-widget handler. When you get this signal you should read the information from the custom widgets, as the widgets are not guaraneed to be around at a later time.
operation : |
the GtkPrintOperation on which the signal was emitted |
widget : |
the custom widget added in create-custom-widget |
user_data : |
user data set when the signal handler was connected. |
Since 2.10
void user_function (GtkPrintOperation *operation, GtkPrintContext *context, gint page_nr, gpointer user_data) : Run last
Gets emitted for every page that is printed. The signal handler
must render the page_nr
's page onto the cairo context obtained
from context
using gtk_print_context_get_cairo_context()
.
static void draw_page (GtkPrintOperation *operation, GtkPrintContext *context, gint page_nr, gpointer user_data) { cairo_t *cr; PangoLayout *layout; gdouble width, text_height; gint layout_height; PangoFontDescription *desc; cr = gtk_print_context_get_cairo_context (context); width = gtk_print_context_get_width (context); cairo_rectangle (cr, 0, 0, width, HEADER_HEIGHT); cairo_set_source_rgb (cr, 0.8, 0.8, 0.8); cairo_fill (cr); layout = gtk_print_context_create_pango_layout (context); desc = pango_font_description_from_string ("sans 14"); pango_layout_set_font_description (layout, desc); pango_font_description_free (desc); pango_layout_set_text (layout, "some text", -1); pango_layout_set_width (layout, width); pango_layout_set_alignment (layout, PANGO_ALIGN_CENTER); pango_layout_get_size (layout, NULL, &layout_height); text_height = (gdouble)layout_height / PANGO_SCALE; cairo_move_to (cr, width / 2, (HEADER_HEIGHT - text_height) / 2); pango_cairo_show_layout (cr, layout); g_object_unref (layout); }
Use gtk_print_operation_set_use_full_page()
and
gtk_print_operation_set_unit()
before starting the print operation
to set up the transformation of the cairo context according to your
needs.
operation : |
the GtkPrintOperation on which the signal was emitted |
context : |
the GtkPrintContext for the current operation |
page_nr : |
the number of the currently printed page |
user_data : |
user data set when the signal handler was connected. |
Since 2.10
void user_function (GtkPrintOperation *operation, GtkPrintContext *context, gpointer user_data) : Run last
Gets emitted after all pages have been rendered. A handler for this signal can clean up any resources that have been allocated in the ::begin-print handler.
operation : |
the GtkPrintOperation on which the signal was emitted |
context : |
the GtkPrintContext for the current operation |
user_data : |
user data set when the signal handler was connected. |
Since 2.10
gboolean user_function (GtkPrintOperation *printoperation, GtkPrintContext *arg1, gpointer user_data) : Run last
printoperation : |
the object which received the signal. |
arg1 : |
|
user_data : |
user data set when the signal handler was connected. |
Returns : |
gboolean user_function (GtkPrintOperation *operation, GtkPrintOperationPreview *preview, GtkPrintContext *context, GtkWindow *parent, gpointer user_data) : Run last
Gets emitted when a preview is requested from the native dialog. If you handle this you must set the cairo context on the printing context.
If you don't override this a default implementation using an external viewer will be used.
operation : |
the GtkPrintOperation on which the signal was emitted |
preview : |
the GtkPrintPreviewOperation for the current operation |
context : |
the GtkPrintContext that will be used |
parent : |
the GtkWindow to use as window parent, or NULL |
user_data : |
user data set when the signal handler was connected. |
Returns : | TRUE if the listener wants to take over control of the preview |
Since 2.10
void user_function (GtkPrintOperation *operation, GtkPrintContext *context, gint page_nr, GtkPageSetup *setup, gpointer user_data) : Run last
Gets emitted once for every page that is printed, to give
the application a chance to modify the page setup. Any changes
done to setup
will be in force only for printing this page.
operation : |
the GtkPrintOperation on which the signal was emitted |
context : |
the GtkPrintContext for the current operation |
page_nr : |
the number of the currently printed page |
setup : |
the GtkPageSetup |
user_data : |
user data set when the signal handler was connected. |
Since 2.10
void user_function (GtkPrintOperation *operation, gpointer user_data) : Run last
Gets emitted at between the various phases of the print operation.
See GtkPrintStatus for the phases that are being discriminated.
Use gtk_print_operation_get_status()
to find out the current
status.
operation : |
the GtkPrintOperation on which the signal was emitted |
user_data : |
user data set when the signal handler was connected. |
Since 2.10