%% @metafontfile{
%%     filename="wncyb10.mf",
%%     version="2.1",
%%     date="30-MAY-1991",
%%     filetype="Metafont: parameter",
%%     copyright="Copyright (C) Humanities and Arts Computing Center,
%%            University of Washington;
%%            all rights reserved.  Copying of this file is
%%            authorized only if either:
%%            (1) you make absolutely no changes to your copy
%%                including name; OR
%%            (2) if you do make changes, you first rename it to some
%%                other name.",
%%     author="American Mathematical Society",
%%     address="American Mathematical Society,
%%            Technical Support Department,
%%            P. O. Box 6248,
%%            Providence, RI 02940,
%%            USA",
%%     telephone="401-455-4080 or (in the USA) 800-321-4AMS",
%%     email="Internet: Tech-Support@Math.AMS.org",
%%     codetable="ISO/ASCII",
%%     checksumtype="line count",
%%     checksum="143",
%%     keywords="amsfonts, tex, metafont , cyrillic ",
%%     abstract="This is the parameter file for use with 
%%            wncyb10, the bold cyrillic font in AMSFonts 2.1."
%%     }
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% This is WNCYB10, Washington Computer Modern Cyrillic Bold 10 point,
% which is based on CMBX10.MF (Computer Modern Bold Extended Roman 10 point)
% and on CMCSC10.MF (Computer Modern Roman Caps and Small Caps 10 point)
%
% (C) 1989 Humanities and Arts Computing Center, University of Washington

if unknown cmbase: input cmbase fi

font_identifier:="WNCYB V2.1"; font_size 10pt#;

u#:=23/36pt#;      % unit width
width_adj#:=11/36pt#;    % width adjustment for certain characters
serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
cap_serif_fit#:=7/36pt#;  % extra sidebar near uppercase serifs
letter_fit#:=0pt#;    % extra space added to all sidebars

body_height#:=270/36pt#;  % height of tallest characters
asc_height#:=250/36pt#;    % height of lowercase ascenders
cap_height#:=247/36pt#;    % height of caps
fig_height#:=232/36pt#;    % height of numerals
x_height#:=160/36pt#;    % height of lowercase without ascenders
math_axis#:=90/36pt#;    % axis of symmetry for math symbols
bar_height#:=85/36pt#;    % height of crossbar in lowercase e
comma_depth#:=70/36pt#;    % depth of comma below baseline
desc_depth#:=70/36pt#;    % depth of lowercase descenders

crisp#:=0pt#;      % diameter of serif corners
tiny#:=13/36pt#;    % diameter of rounded corners
fine#:=10/36pt#;    % diameter of sharply rounded corners
thin_join#:=10/36pt#;    % width of extrafine details
hair#:=17/36pt#;    % lowercase hairline breadth
stem#:=41/36pt#;    % lowercase stem breadth
curve#:=46/36pt#;    % lowercase curve breadth
ess#:=38/36pt#;      % breadth in middle of lowercase s
flare#:=45/36pt#;    % diameter of bulbs or breadth of terminals
dot_size#:=56/36pt#;    % diameter of dots
cap_hair#:=19/36pt#;    % uppercase hairline breadth
cap_stem#:=51/36pt#;    % uppercase stem breadth
cap_curve#:=55/36pt#;    % uppercase curve breadth
cap_ess#:=53/36pt#;    % breadth in middle of uppercase s
rule_thickness#:=.6pt#;    % thickness of lines in math symbols

dish#:=1/36pt#;      % amount erased at top or bottom of serifs
bracket#:=10/36pt#;    % vertical distance from serif base to tangent
jut#:=25/36pt#;      % protrusion of lowercase serifs
cap_jut#:=39/36pt#;    % protrusion of uppercase serifs
beak_jut#:=11/36pt#;    % horizontal protrusion of beak serifs
beak#:=70/36pt#;    % vertical protrusion of beak serifs
vair#:=13/36pt#;    % vertical diameter of hairlines
notch_cut#:=10pt#;    % maximum breadth above or below notches
bar#:=17/36pt#;      % lowercase bar thickness
slab#:=17/36pt#;    % serif and arm thickness
cap_bar#:=17/36pt#;    % uppercase bar thickness
cap_band#:=17/36pt#;    % uppercase thickness above/below lobes
cap_notch_cut#:=10pt#;    % max breadth above/below uppercase notches
serif_drop#:=3/36pt#;    % vertical drop of sloped serifs
stem_corr#:=2/36pt#;    % for small refinements of stem breadth
vair_corr#:=1.5/36pt#;    % for small refinements of hairline height
apex_corr#:=0pt#;    % extra width at diagonal junctions

o#:=4/36pt#;      % amount of overshoot for curves
apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions

slant:=0;      % tilt ratio $(^Delta x/^Delta y)$
fudge:=1;      % factor applied to weights of heavy characters
math_spread:=.5;    % extra openness of math symbols
superness:=8/11;    % parameter for superellipses
superpull:=1/8;      % extra openness inside bowls
beak_darkness:=.4;    % fraction of triangle inside beak serifs
ligs:=2;      % level of ligatures to be included

square_dots:=false;    % should dots be square?
hefty:=false;      % should we try hard not to be overweight?
serifs:=true;      % should serifs and bulbs be attached?
monospace:=false;    % should all characters have the same width?
variant_g:=false;    % should an italic-style g be used?
low_asterisk:=false;    % should the asterisk be centered at the axis?
math_fitting:=false;    % should math-mode spacing be used?

lower.u#:=16/36pt#;    % unit width
lower.width_adj#:=7/36pt#;    % width adjustment for certain characters
lower.cap_serif_fit#:=4/36pt#;  % extra sidebar near uppercase serifs
lower.letter_fit#:=0/36pt#;  % extra space added to all sidebars

lower.body_height#:=175/36pt#;  % height of tallest characters
lower.cap_height#:=160/36pt#;  % height of caps
lower.x_height#:=100/36pt#;  % height of lowercase without ascenders
lower.bar_height#:=55/36pt#;  % height of crossbar in lowercase e
lower.comma_depth#:=44/36pt#;  % depth of comma below baseline

lower.flare#:=32/36pt#;    % diameter of bulbs or breadth of terminals
lower.cap_hair#:=17/36pt#;  % uppercase hairline breadth %might be reduced to 7
lower.stem#:=41/36pt#;    % lowercase stem breadth
lower.cap_stem#:=41/36pt#;  % uppercase stem breadth
lower.cap_curve#:=46/36pt#;  % uppercase curve breadth
lower.cap_ess#:=38/36pt#;  % breadth in middle of uppercase s

lower.cap_jut#:=28/36pt#;  % protrusion of uppercase serifs
lower.beak_jut#:=11/36pt#;  % horizontal protrusion of beak serifs
lower.beak#:=44/36pt#;    % vertical protrusion of beak serifs
lower.slab#:=17/36pt#;    % serif and arm thickness
lower.cap_bar#:=17/36pt#;  % uppercase bar thickness
lower.cap_band#:=17/36pt#;  % uppercase thickness above/below lobes
lower.cap_notch_cut#:=10pt#;  % max breadth above/below uppercase notches

lower.o#:=4/36pt#;    % amount of overshoot for curves
lower.apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions

lower.fudge:=1;      % factor applied to weights of heavy characters


generate cyrfont      % switch to the driver file