commit 07a03b97b9ce2a6430344386eeab9b16283b893f Author: Greg Kroah-Hartman Date: Sun Nov 4 14:50:54 2018 +0100 Linux 4.19.1 commit c6819700fef8809fdd62fea69fa6fecc552d7a49 Author: Nikolay Aleksandrov Date: Sat Oct 27 12:07:47 2018 +0300 net: bridge: remove ipv6 zero address check in mcast queries commit 0fe5119e267f3e3d8ac206895f5922195ec55a8a upstream. Recently a check was added which prevents marking of routers with zero source address, but for IPv6 that cannot happen as the relevant RFCs actually forbid such packets: RFC 2710 (MLDv1): "To be valid, the Query message MUST come from a link-local IPv6 Source Address, be at least 24 octets long, and have a correct MLD checksum." Same goes for RFC 3810. And also it can be seen as a requirement in ipv6_mc_check_mld_query() which is used by the bridge to validate the message before processing it. Thus any queries with :: source address won't be processed anyway. So just remove the check for zero IPv6 source address from the query processing function. Fixes: 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Cc: Hangbin Liu Signed-off-by: Greg Kroah-Hartman commit 63383315a95629d85d29e73e8b7f963e5ad15ce1 Author: David S. Miller Date: Wed Oct 31 18:30:21 2018 -0700 sparc64: Wire up compat getpeername and getsockname. [ Upstream commit 1f2b5b8e2df4591fbca430aff9c5a072dcc0f408 ] Fixes: 8b30ca73b7cc ("sparc: Add all necessary direct socket system calls.") Reported-by: Joseph Myers Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit d7f58d5f2cdbd5a12f3f6b71606f374353f07cf9 Author: David Miller Date: Thu Oct 25 20:36:46 2018 -0700 sparc64: Make corrupted user stacks more debuggable. [ Upstream commit 5b4fc3882a649c9411dd0dcad2ddb78e911d340e ] Right now if we get a corrupted user stack frame we do a do_exit(SIGILL) which is not helpful. If under a debugger, this behavior causes the inferior process to exit. So the register and other state cannot be examined at the time of the event. Instead, conditionally log a rate limited kernel log message and then force a SIGSEGV. With bits and ideas borrowed (as usual) from powerpc. Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 9b5bc99b10e8260b5fe4fab3a143869c50e7aea3 Author: David S. Miller Date: Fri Oct 26 15:11:56 2018 -0700 sparc64: Export __node_distance. [ Upstream commit 2b4792eaa9f553764047d157365ed8b7787751a3 ] Some drivers reference it via node_distance(), for example the NVME host driver core. ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 2b52f2c4e5e7da9203b0e8762e68dc3f3305b634 Author: Xin Long Date: Mon Oct 29 23:13:11 2018 +0800 sctp: check policy more carefully when getting pr status [ Upstream commit 713358369382cebf92f6e98ce2005f94e7344931 ] When getting pr_assocstatus and pr_streamstatus by sctp_getsockopt, it doesn't correctly process the case when policy is set with SCTP_PR_SCTP_ALL | SCTP_PR_SCTP_MASK. It even causes a slab-out-of-bounds in sctp_getsockopt_pr_streamstatus(). This patch fixes it by return -EINVAL for this case. Fixes: 0ac1077e3a54 ("sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL") Reported-by: syzbot+5da0d0a72a9e7d791748@syzkaller.appspotmail.com Suggested-by: Marcelo Ricardo Leitner Signed-off-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 7ce2e02cc6e819563ad7c6ea2db9de7a2e646d69 Author: Ivan Vecera Date: Tue Oct 23 16:40:26 2018 +0200 Revert "be2net: remove desc field from be_eq_obj" [ Upstream commit 5ef79151c2fbc401cf38325e9a32e77b9fc593ae ] The mentioned commit needs to be reverted because we cannot pass string allocated on stack to request_irq(). This function stores uses this pointer for later use (e.g. /proc/interrupts) so we need to keep this string persistently. Fixes: d6d9704af8f4 ("be2net: remove desc field from be_eq_obj") Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 4778b9f0268cc68ad197ed8e39a7ab2400b82f8d Author: Heiner Kallweit Date: Thu Oct 25 18:40:19 2018 +0200 r8169: fix broken Wake-on-LAN from S5 (poweroff) [ Upstream commit 649f0837a8cc2b39329f2de00fa0d04b029291c5 ] It was reported that WoL from S5 is broken (WoL from S3 works) and the analysis showed that during system shutdown the network interface was brought down already when the actual kernel shutdown started. Therefore netif_running() returned false and as a consequence the PHY was suspended. Obviously WoL wasn't working then. To fix this the original patch needs to be effectively reverted. A side effect is that when normally bringing down the interface and WoL is enabled the PHY will remain powered on (like it was before the original patch). Fixes: fe87bef01f9b ("r8169: don't check WoL when powering down PHY and interface is down") Reported-by: Neil MacLeod Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 89e5f2d9219dbd522e6d60e7639f09fa1ccda1cd Author: David S. Miller Date: Sun Oct 28 10:35:12 2018 -0700 net: Properly unlink GRO packets on overflow. [ Upstream commti ece23711dd956cd5053c9cb03e9fe0668f9c8894 ] Just like with normal GRO processing, we have to initialize skb->next to NULL when we unlink overflow packets from the GRO hash lists. Fixes: d4546c2509b1 ("net: Convert GRO SKB handling to list_head.") Reported-by: Oleksandr Natalenko Tested-by: Oleksandr Natalenko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 54d6a82d05dcc29b212d785dea917a9d2268cb58 Author: Cong Wang Date: Thu Nov 1 12:02:37 2018 -0700 net: drop skb on failure in ip_check_defrag() [ Upstream commit 7de414a9dd91426318df7b63da024b2b07e53df5 ] Most callers of pskb_trim_rcsum() simply drop the skb when it fails, however, ip_check_defrag() still continues to pass the skb up to stack. This is suspicious. In ip_check_defrag(), after we learn the skb is an IP fragment, passing the skb to callers makes no sense, because callers expect fragments are defrag'ed on success. So, dropping the skb when we can't defrag it is reasonable. Note, prior to commit 88078d98d1bb, this is not a big problem as checksum will be fixed up anyway. After it, the checksum is not correct on failure. Found this during code review. Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends") Cc: Eric Dumazet Signed-off-by: Cong Wang Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit b5ce2a238a8b4f1ee0a5a23b4d7e6929d6733bb2 Author: Shalom Toledo Date: Mon Oct 29 14:26:16 2018 +0000 mlxsw: core: Fix devlink unregister flow [ Upstream commit a22712a962912faf257e857ab6857f56a93cfb34 ] After a failed reload, the driver is still registered to devlink, its devlink instance is still allocated and the 'reload_fail' flag is set. Then, in the next reload try, the driver's allocated devlink instance will be freed without unregistering from devlink and its components (e.g, resources). This scenario can cause a use-after-free if the user tries to execute command via devlink user-space tool. Fix by not freeing the devlink instance during reload (failed or not). Fixes: 24cc68ad6c46 ("mlxsw: core: Add support for reload") Signed-off-by: Shalom Toledo Reviewed-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit a731a1e85d708fbe0d69809a00d9b3d67a672843 Author: Petr Machata Date: Mon Oct 29 14:26:14 2018 +0000 mlxsw: spectrum_switchdev: Don't ignore deletions of learned MACs [ Upstream commit ad0b9d94182be8356978d220c82f9837cffeb7a9 ] Demands to remove FDB entries should be honored even if the FDB entry in question was originally learned, and not added by the user. Therefore ignore the added_by_user datum for SWITCHDEV_FDB_DEL_TO_DEVICE. Fixes: 816a3bed9549 ("switchdev: Add fdb.added_by_user to switchdev notifications") Signed-off-by: Petr Machata Suggested-by: Ido Schimmel Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit c3f13a4debd6f1dda4294831216216242e4624f1 Author: Karsten Graul Date: Thu Oct 25 13:25:28 2018 +0200 net/smc: fix smc_buf_unuse to use the lgr pointer [ Upstream commit fb692ec4117f6fd25044cfb5720d6b79d400dc65 ] The pointer to the link group is unset in the smc connection structure right before the call to smc_buf_unuse. Provide the lgr pointer to smc_buf_unuse explicitly. And move the call to smc_lgr_schedule_free_work to the end of smc_conn_free. Fixes: a6920d1d130c ("net/smc: handle unregistered buffers") Signed-off-by: Karsten Graul Signed-off-by: Ursula Braun Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 6a4aa53a94615ab4a8cf66b24e3780719378a059 Author: David Ahern Date: Wed Oct 24 13:58:39 2018 -0700 net/ipv6: Allow onlink routes to have a device mismatch if it is the default route [ Upstream commit 4ed591c8ab44e711e56b8e021ffaf4f407c045f5 ] The intent of ip6_route_check_nh_onlink is to make sure the gateway given for an onlink route is not actually on a connected route for a different interface (e.g., 2001:db8:1::/64 is on dev eth1 and then an onlink route has a via 2001:db8:1::1 dev eth2). If the gateway lookup hits the default route then it most likely will be a different interface than the onlink route which is ok. Update ip6_route_check_nh_onlink to disregard the device mismatch if the gateway lookup hits the default route. Turns out the existing onlink tests are passing because there is no default route or it is an unreachable default, so update the onlink tests to have a default route other than unreachable. Fixes: fc1e64e1092f6 ("net/ipv6: Add support for onlink flag") Signed-off-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 0024aeb00417eebdf08c51c3dea698f7f0e82452 Author: Jaime Caamaño Ruiz Date: Wed Oct 31 18:52:03 2018 +0100 openvswitch: Fix push/pop ethernet validation [ Upstream commit 46ebe2834ba5b541f28ee72e556a3fed42c47570 ] When there are both pop and push ethernet header actions among the actions to be applied to a packet, an unexpected EINVAL (Invalid argument) error is obtained. This is due to mac_proto not being reset correctly when those actions are validated. Reported-at: https://mail.openvswitch.org/pipermail/ovs-discuss/2018-October/047554.html Fixes: 91820da6ae85 ("openvswitch: add Ethernet push and pop actions") Signed-off-by: Jaime Caamaño Ruiz Tested-by: Greg Rose Reviewed-by: Greg Rose Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 655b0860ca7e03297bfeb75209fb6393f2656a2f Author: Tobias Jungel Date: Sun Oct 28 12:54:10 2018 +0100 bonding: fix length of actor system [ Upstream commit 414dd6fb9a1a1b59983aea7bf0f79f0085ecc5b8 ] The attribute IFLA_BOND_AD_ACTOR_SYSTEM is sent to user space having the length of sizeof(bond->params.ad_actor_system) which is 8 byte. This patch aligns the length to ETH_ALEN to have the same MAC address exposed as using sysfs. Fixes: f87fda00b6ed2 ("bonding: prevent out of bound accesses") Signed-off-by: Tobias Jungel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 26ab2eb87000532dc31a14210e85f5f4efeeab17 Author: Jason Wang Date: Tue Oct 30 14:10:49 2018 +0800 vhost: Fix Spectre V1 vulnerability [ Upstream commit ff002269a4ee9c769dbf9365acef633ebcbd6cbe ] The idx in vhost_vring_ioctl() was controlled by userspace, hence a potential exploitation of the Spectre variant 1 vulnerability. Fixing this by sanitizing idx before using it to index d->vqs. Cc: Michael S. Tsirkin Cc: Josh Poimboeuf Cc: Andrea Arcangeli Signed-off-by: Jason Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 2799b518854842ee3421e4debcc498a6c7ea4656 Author: Ido Schimmel Date: Mon Oct 29 20:36:43 2018 +0000 rtnetlink: Disallow FDB configuration for non-Ethernet device [ Upstream commit da71577545a52be3e0e9225a946e5fd79cfab015 ] When an FDB entry is configured, the address is validated to have the length of an Ethernet address, but the device for which the address is configured can be of any type. The above can result in the use of uninitialized memory when the address is later compared against existing addresses since 'dev->addr_len' is used and it may be greater than ETH_ALEN, as with ip6tnl devices. Fix this by making sure that FDB entries are only configured for Ethernet devices. BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863 CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x14b/0x190 lib/dump_stack.c:113 kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956 __msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645 memcmp+0x11d/0x180 lib/string.c:863 dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464 ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline] rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558 rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715 netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x440ee9 Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003 RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0 R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181 kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2718 [inline] __kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:996 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline] netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 v2: * Make error message more specific (David) Fixes: 090096bf3db1 ("net: generic fdb support for drivers without ndo_fdb_") Signed-off-by: Ido Schimmel Reported-and-tested-by: syzbot+3a288d5f5530b901310e@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+d53ab4e92a1db04110ff@syzkaller.appspotmail.com Cc: Vlad Yasevich Cc: David Ahern Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit fd54c188b3391acc9a9bba329b10d4965e0ab812 Author: Karsten Graul Date: Tue Oct 23 13:40:39 2018 +0200 Revert "net: simplify sock_poll_wait" [ Upstream commit 89ab066d4229acd32e323f1569833302544a4186 ] This reverts commit dd979b4df817e9976f18fb6f9d134d6bc4a3c317. This broke tcp_poll for SMC fallback: An AF_SMC socket establishes an internal TCP socket for the initial handshake with the remote peer. Whenever the SMC connection can not be established this TCP socket is used as a fallback. All socket operations on the SMC socket are then forwarded to the TCP socket. In case of poll, the file->private_data pointer references the SMC socket because the TCP socket has no file assigned. This causes tcp_poll to wait on the wrong socket. Signed-off-by: Karsten Graul Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 4fb0dc97de1cd79399ab0c556f096d8db2bac278 Author: Sean Tranchetti Date: Tue Oct 23 16:04:31 2018 -0600 net: udp: fix handling of CHECKSUM_COMPLETE packets [ Upstream commit db4f1be3ca9b0ef7330763d07bf4ace83ad6f913 ] Current handling of CHECKSUM_COMPLETE packets by the UDP stack is incorrect for any packet that has an incorrect checksum value. udp4/6_csum_init() will both make a call to __skb_checksum_validate_complete() to initialize/validate the csum field when receiving a CHECKSUM_COMPLETE packet. When this packet fails validation, skb->csum will be overwritten with the pseudoheader checksum so the packet can be fully validated by software, but the skb->ip_summed value will be left as CHECKSUM_COMPLETE so that way the stack can later warn the user about their hardware spewing bad checksums. Unfortunately, leaving the SKB in this state can cause problems later on in the checksum calculation. Since the the packet is still marked as CHECKSUM_COMPLETE, udp_csum_pull_header() will SUBTRACT the checksum of the UDP header from skb->csum instead of adding it, leaving us with a garbage value in that field. Once we try to copy the packet to userspace in the udp4/6_recvmsg(), we'll make a call to skb_copy_and_csum_datagram_msg() to checksum the packet data and add it in the garbage skb->csum value to perform our final validation check. Since the value we're validating is not the proper checksum, it's possible that the folded value could come out to 0, causing us not to drop the packet. Instead, we believe that the packet was checksummed incorrectly by hardware since skb->ip_summed is still CHECKSUM_COMPLETE, and we attempt to warn the user with netdev_rx_csum_fault(skb->dev); Unfortunately, since this is the UDP path, skb->dev has been overwritten by skb->dev_scratch and is no longer a valid pointer, so we end up reading invalid memory. This patch addresses this problem in two ways: 1) Do not use the dev pointer when calling netdev_rx_csum_fault() from skb_copy_and_csum_datagram_msg(). Since this gets called from the UDP path where skb->dev has been overwritten, we have no way of knowing if the pointer is still valid. Also for the sake of consistency with the other uses of netdev_rx_csum_fault(), don't attempt to call it if the packet was checksummed by software. 2) Add better CHECKSUM_COMPLETE handling to udp4/6_csum_init(). If we receive a packet that's CHECKSUM_COMPLETE that fails verification (i.e. skb->csum_valid == 0), check who performed the calculation. It's possible that the checksum was done in software by the network stack earlier (such as Netfilter's CONNTRACK module), and if that says the checksum is bad, we can drop the packet immediately instead of waiting until we try and copy it to userspace. Otherwise, we need to mark the SKB as CHECKSUM_NONE, since the skb->csum field no longer contains the full packet checksum after the call to __skb_checksum_validate_complete(). Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Fixes: c84d949057ca ("udp: copy skb->truesize in the first cache line") Cc: Sam Kumar Cc: Eric Dumazet Signed-off-by: Sean Tranchetti Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit b4f003cb48d56dcc7fad28f76ea051f4949b22e4 Author: Niklas Cassel Date: Wed Oct 31 16:08:10 2018 +0100 net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules [ Upstream commit 30549aab146ccb1275230c3b4b4bc6b4181fd54e ] When building stmmac, it is only possible to select CONFIG_DWMAC_GENERIC, or any of the glue drivers, when CONFIG_STMMAC_PLATFORM is set. The only exception is CONFIG_STMMAC_PCI. When calling of_mdiobus_register(), it will call our ->reset() callback, which is set to stmmac_mdio_reset(). Most of the code in stmmac_mdio_reset() is protected by a "#if defined(CONFIG_STMMAC_PLATFORM)", which will evaluate to false when CONFIG_STMMAC_PLATFORM=m. Because of this, the phy reset gpio will only be pulled when stmmac is built as built-in, but not when built as modules. Fix this by using "#if IS_ENABLED()" instead of "#if defined()". Signed-off-by: Niklas Cassel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 917629e6e2f60c391d1a9dbd9188f35d8703840c Author: Jakub Kicinski Date: Fri Oct 26 15:51:06 2018 -0700 net: sched: gred: pass the right attribute to gred_change_table_def() [ Upstream commit 38b4f18d56372e1e21771ab7b0357b853330186c ] gred_change_table_def() takes a pointer to TCA_GRED_DPS attribute, and expects it will be able to interpret its contents as struct tc_gred_sopt. Pass the correct gred attribute, instead of TCA_OPTIONS. This bug meant the table definition could never be changed after Qdisc was initialized (unless whatever TCA_OPTIONS contained both passed netlink validation and was a valid struct tc_gred_sopt...). Old behaviour: $ ip link add type dummy $ tc qdisc replace dev dummy0 parent root handle 7: \ gred setup vqs 4 default 0 $ tc qdisc replace dev dummy0 parent root handle 7: \ gred setup vqs 4 default 0 RTNETLINK answers: Invalid argument Now: $ ip link add type dummy $ tc qdisc replace dev dummy0 parent root handle 7: \ gred setup vqs 4 default 0 $ tc qdisc replace dev dummy0 parent root handle 7: \ gred setup vqs 4 default 0 $ tc qdisc replace dev dummy0 parent root handle 7: \ gred setup vqs 4 default 0 Fixes: f62d6b936df5 ("[PKT_SCHED]: GRED: Use central VQ change procedure") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit c5eebcf0736a2429db3528c5dc05cb1aacd68200 Author: Eric Dumazet Date: Tue Oct 30 00:57:25 2018 -0700 net/mlx5e: fix csum adjustments caused by RXFCS [ Upstream commit d48051c5b8376038c2b287c3b1bd55b8d391d567 ] As shown by Dmitris, we need to use csum_block_add() instead of csum_add() when adding the FCS contribution to skb csum. Before 4.18 (more exactly commit 88078d98d1bb "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), the whole skb csum was thrown away, so RXFCS changes were ignored. Then before commit d55bef5059dd ("net: fix pskb_trim_rcsum_slow() with odd trim offset") both mlx5 and pskb_trim_rcsum_slow() bugs were canceling each other. Now we fixed pskb_trim_rcsum_slow() we need to fix mlx5. Note that this patch also rewrites mlx5e_get_fcs() to : - Use skb_header_pointer() instead of reinventing it. - Use __get_unaligned_cpu32() to avoid possible non aligned accesses as Dmitris pointed out. Fixes: 902a545904c7 ("net/mlx5e: When RXFCS is set, add FCS data into checksum calculation") Reported-by: Paweł Staszewski Signed-off-by: Eric Dumazet Cc: Eran Ben Elisha Cc: Saeed Mahameed Cc: Dimitris Michailidis Cc: Cong Wang Cc: Paweł Staszewski Reviewed-by: Eran Ben Elisha Tested-By: Maria Pasechnik Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit dc31623a99ade97eedf5cf889bae9b178dda4fc0 Author: Stefano Brivio Date: Wed Oct 24 14:37:21 2018 +0200 ipv6/ndisc: Preserve IPv6 control buffer if protocol error handlers are called [ Upstream commit ee1abcf689353f36d9322231b4320926096bdee0 ] Commit a61bbcf28a8c ("[NET]: Store skb->timestamp as offset to a base timestamp") introduces a neighbour control buffer and zeroes it out in ndisc_rcv(), as ndisc_recv_ns() uses it. Commit f2776ff04722 ("[IPV6]: Fix address/interface handling in UDP and DCCP, according to the scoping architecture.") introduces the usage of the IPv6 control buffer in protocol error handlers (e.g. inet6_iif() in present-day __udp6_lib_err()). Now, with commit b94f1c0904da ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect()."), we call protocol error handlers from ndisc_redirect_rcv(), after the control buffer is already stolen and some parts are already zeroed out. This implies that inet6_iif() on this path will always return zero. This gives unexpected results on UDP socket lookup in __udp6_lib_err(), as we might actually need to match sockets for a given interface. Instead of always claiming the control buffer in ndisc_rcv(), do that only when needed. Fixes: b94f1c0904da ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect().") Signed-off-by: Stefano Brivio Reviewed-by: Sabrina Dubroca Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 0f216d946a4a47bc132f4d2513a1837327ab59d8 Author: Hangbin Liu Date: Fri Oct 26 10:28:43 2018 +0800 bridge: do not add port to router list when receives query with source 0.0.0.0 [ Upstream commit 5a2de63fd1a59c30c02526d427bc014b98adf508 ] Based on RFC 4541, 2.1.1. IGMP Forwarding Rules The switch supporting IGMP snooping must maintain a list of multicast routers and the ports on which they are attached. This list can be constructed in any combination of the following ways: a) This list should be built by the snooping switch sending Multicast Router Solicitation messages as described in IGMP Multicast Router Discovery [MRDISC]. It may also snoop Multicast Router Advertisement messages sent by and to other nodes. b) The arrival port for IGMP Queries (sent by multicast routers) where the source address is not 0.0.0.0. We should not add the port to router list when receives query with source 0.0.0.0. Reported-by: Ying Xu Signed-off-by: Hangbin Liu Acked-by: Nikolay Aleksandrov Acked-by: Roopa Prabhu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman