commit 1ccc597f801cbecffcaed7f2d1f620ec48f6f8df Author: Greg Kroah-Hartman Date: Tue Jun 14 16:54:02 2022 +0200 Linux 4.14.283 Link: https://lore.kernel.org/r/20220613094908.257446132@linuxfoundation.org Tested-by: Guenter Roeck Tested-by: Linux Kernel Functional Testing Signed-off-by: Greg Kroah-Hartman commit 42726877453afdbe1508a8a96884ea907741d9a7 Author: Eric Dumazet Date: Fri May 27 14:28:29 2022 -0700 tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd commit 11825765291a93d8e7f44230da67b9f607c777bf upstream. syzbot got a new report [1] finally pointing to a very old bug, added in initial support for MTU probing. tcp_mtu_probe() has checks about starting an MTU probe if tcp_snd_cwnd(tp) >= 11. But nothing prevents tcp_snd_cwnd(tp) to be reduced later and before the MTU probe succeeds. This bug would lead to potential zero-divides. Debugging added in commit 40570375356c ("tcp: add accessors to read/set tp->snd_cwnd") has paid off :) While we are at it, address potential overflows in this code. [1] WARNING: CPU: 1 PID: 14132 at include/net/tcp.h:1219 tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712 Modules linked in: CPU: 1 PID: 14132 Comm: syz-executor.2 Not tainted 5.18.0-syzkaller-07857-gbabf0bb978e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_snd_cwnd_set include/net/tcp.h:1219 [inline] RIP: 0010:tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712 Code: 74 08 48 89 ef e8 da 80 17 f9 48 8b 45 00 65 48 ff 80 80 03 00 00 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 aa b0 c5 f8 <0f> 0b e9 16 fe ff ff 48 8b 4c 24 08 80 e1 07 38 c1 0f 8c c7 fc ff RSP: 0018:ffffc900079e70f8 EFLAGS: 00010287 RAX: ffffffff88c0f7f6 RBX: ffff8880756e7a80 RCX: 0000000000040000 RDX: ffffc9000c6c4000 RSI: 0000000000031f9e RDI: 0000000000031f9f RBP: 0000000000000000 R08: ffffffff88c0f606 R09: ffffc900079e7520 R10: ffffed101011226d R11: 1ffff1101011226c R12: 1ffff1100eadcf50 R13: ffff8880756e72c0 R14: 1ffff1100eadcf89 R15: dffffc0000000000 FS: 00007f643236e700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1ab3f1e2a0 CR3: 0000000064fe7000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tcp_clean_rtx_queue+0x223a/0x2da0 net/ipv4/tcp_input.c:3356 tcp_ack+0x1962/0x3c90 net/ipv4/tcp_input.c:3861 tcp_rcv_established+0x7c8/0x1ac0 net/ipv4/tcp_input.c:5973 tcp_v6_do_rcv+0x57b/0x1210 net/ipv6/tcp_ipv6.c:1476 sk_backlog_rcv include/net/sock.h:1061 [inline] __release_sock+0x1d8/0x4c0 net/core/sock.c:2849 release_sock+0x5d/0x1c0 net/core/sock.c:3404 sk_stream_wait_memory+0x700/0xdc0 net/core/stream.c:145 tcp_sendmsg_locked+0x111d/0x3fc0 net/ipv4/tcp.c:1410 tcp_sendmsg+0x2c/0x40 net/ipv4/tcp.c:1448 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] __sys_sendto+0x439/0x5c0 net/socket.c:2119 __do_sys_sendto net/socket.c:2131 [inline] __se_sys_sendto net/socket.c:2127 [inline] __x64_sys_sendto+0xda/0xf0 net/socket.c:2127 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6431289109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f643236e168 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f643139c100 RCX: 00007f6431289109 RDX: 00000000d0d0c2ac RSI: 0000000020000080 RDI: 000000000000000a RBP: 00007f64312e308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff372533af R14: 00007f643236e300 R15: 0000000000022000 Fixes: 5d424d5a674f ("[TCP]: MTU probing") Signed-off-by: Eric Dumazet Reported-by: syzbot Acked-by: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit c1f61bc67e6f2d4d931e2063ab55963337bea4cd Author: Johan Hovold Date: Fri Apr 1 15:38:54 2022 +0200 PCI: qcom: Fix unbalanced PHY init on probe errors commit 83013631f0f9961416abd812e228c8efbc2f6069 upstream. Undo the PHY initialisation (e.g. balance runtime PM) if host initialisation fails during probe. Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Johan Hovold Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam Acked-by: Stanimir Varbanov Cc: stable@vger.kernel.org # 4.5 Signed-off-by: Greg Kroah-Hartman commit a91d7bb9bec8954a58b35e40c1b8f7d9b91713fa Author: Tokunori Ikegami Date: Thu Mar 24 02:04:56 2022 +0900 mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N commit 0a8e98305f63deaf0a799d5cf5532cc83af035d1 upstream. Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") buffered writes fail on S29GL064N. This is because, on S29GL064N, reads return 0xFF at the end of DQ polling for write completion, where as, chip_good() check expects actual data written to the last location to be returned post DQ polling completion. Fix is to revert to using chip_good() for S29GL064N which only checks for DQ lines to settle down to determine write completion. Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/ Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Cc: stable@vger.kernel.org Signed-off-by: Tokunori Ikegami Acked-by: Vignesh Raghavendra Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-3-ikegami.t@gmail.com Signed-off-by: Greg Kroah-Hartman commit 46a9d87ea2aa35bbaa2be213e94cf94a8048ddef Author: Tokunori Ikegami Date: Thu Mar 24 02:04:55 2022 +0900 mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write commit 083084df578a8bdb18334f69e7b32d690aaa3247 upstream. This is a preparation patch for the S29GL064N buffer writes fix. There is no functional change. Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/ Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by: Tokunori Ikegami Cc: stable@vger.kernel.org Acked-by: Vignesh Raghavendra Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-2-ikegami.t@gmail.com Signed-off-by: Greg Kroah-Hartman commit c2e6681944db4ee641354f22a67b131969a055bc Author: Pascal Hambourg Date: Wed Apr 13 08:53:56 2022 +0200 md/raid0: Ignore RAID0 layout if the second zone has only one device commit ea23994edc4169bd90d7a9b5908c6ccefd82fa40 upstream. The RAID0 layout is irrelevant if all members have the same size so the array has only one zone. It is *also* irrelevant if the array has two zones and the second zone has only one device, for example if the array has two members of different sizes. So in that case it makes sense to allow assembly even when the layout is undefined, like what is done when the array has only one zone. Reviewed-by: NeilBrown Signed-off-by: Pascal Hambourg Signed-off-by: Song Liu Signed-off-by: Greg Kroah-Hartman commit d13c94c4b6f816e79b8e4df193db1bdcc7253610 Author: Michael Ellerman Date: Tue Jun 7 00:34:56 2022 +1000 powerpc/32: Fix overread/overwrite of thread_struct via ptrace commit 8e1278444446fc97778a5e5c99bca1ce0bbc5ec9 upstream. The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process to read/write registers of another process. To get/set a register, the API takes an index into an imaginary address space called the "USER area", where the registers of the process are laid out in some fashion. The kernel then maps that index to a particular register in its own data structures and gets/sets the value. The API only allows a single machine-word to be read/written at a time. So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels. The way floating point registers (FPRs) are addressed is somewhat complicated, because double precision float values are 64-bit even on 32-bit CPUs. That means on 32-bit kernels each FPR occupies two word-sized locations in the USER area. On 64-bit kernels each FPR occupies one word-sized location in the USER area. Internally the kernel stores the FPRs in an array of u64s, or if VSX is enabled, an array of pairs of u64s where one half of each pair stores the FPR. Which half of the pair stores the FPR depends on the kernel's endianness. To handle the different layouts of the FPRs depending on VSX/no-VSX and big/little endian, the TS_FPR() macro was introduced. Unfortunately the TS_FPR() macro does not take into account the fact that the addressing of each FPR differs between 32-bit and 64-bit kernels. It just takes the index into the "USER area" passed from userspace and indexes into the fp_state.fpr array. On 32-bit there are 64 indexes that address FPRs, but only 32 entries in the fp_state.fpr array, meaning the user can read/write 256 bytes past the end of the array. Because the fp_state sits in the middle of the thread_struct there are various fields than can be overwritten, including some pointers. As such it may be exploitable. It has also been observed to cause systems to hang or otherwise misbehave when using gdbserver, and is probably the root cause of this report which could not be easily reproduced: https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/ Rather than trying to make the TS_FPR() macro even more complicated to fix the bug, or add more macros, instead add a special-case for 32-bit kernels. This is more obvious and hopefully avoids a similar bug happening again in future. Note that because 32-bit kernels never have VSX enabled the code doesn't need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to ensure that 32-bit && VSX is never enabled. Fixes: 87fec0514f61 ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds") Cc: stable@vger.kernel.org # v3.13+ Reported-by: Ariel Miculas Tested-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman commit c850f24a6ac114e69bc7195b2259802e21a266d3 Author: Mathias Nyman Date: Tue Jun 7 12:11:33 2022 -0700 Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag commit c42e65664390be7c1ef3838cd84956d3a2739d60 upstream. The bcm5974 driver does the allocation and dma mapping of the usb urb data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag to let usb core know the buffer is already mapped. usb core tries to map the already mapped buffer, causing a warning: "xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory" Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core know buffer is already mapped by bcm5974 driver Signed-off-by: Mathias Nyman Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890 Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit fd39e5a280130a0c8c566e077b30d89e5c508374 Author: Olivier Matz Date: Wed Apr 6 11:52:52 2022 +0200 ixgbe: fix unexpected VLAN Rx in promisc mode on VF commit 7bb0fb7c63df95d6027dc50d6af3bc3bbbc25483 upstream. When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE bit (VLAN Promiscuous Enable) is set. This means that the VF will receive packets whose VLAN is not the same than the VLAN of the VF. For instance, in this situation: ┌────────┐ ┌────────┐ ┌────────┐ │ │ │ │ │ │ │ │ │ │ │ │ │ VF0├────┤VF1 VF2├────┤VF3 │ │ │ │ │ │ │ └────────┘ └────────┘ └────────┘ VM1 VM2 VM3 vf 0: vlan 1000 vf 1: vlan 1000 vf 2: vlan 1001 vf 3: vlan 1001 If we tcpdump on VF3, we see all the packets, even those transmitted on vlan 1000. This behavior prevents to bridge VF1 and VF2 in VM2, because it will create a loop: packets transmitted on VF1 will be received by VF2 and vice-versa, and bridged again through the software bridge. This patch remove the activation of VLAN Promiscuous when a VF enables the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast Promiscuous) is kept, so that a VF receives all packets that has the same VLAN, whatever the destination MAC address. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel Signed-off-by: Olivier Matz Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman commit 7d093d26af70bda7b2b2ed76e1908fcdd5496333 Author: Olivier Matz Date: Wed Apr 6 11:52:51 2022 +0200 ixgbe: fix bcast packets Rx on VF after promisc removal commit 803e9895ea2b0fe80bc85980ae2d7a7e44037914 upstream. After a VF requested to remove the promiscuous flag on an interface, the broadcast packets are not received anymore. This breaks some protocols like ARP. In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM bit (Broadcast Accept) on promiscuous removal. This flag is already set by default in ixgbe_set_vmolr() on VF reset. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel Signed-off-by: Olivier Matz Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman commit d221ce54ce331c1a23be71eebf57f6a088632383 Author: Martin Faltesek Date: Mon Jun 6 21:57:28 2022 -0500 nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling commit 996419e0594abb311fb958553809f24f38e7abbe upstream. Error paths do not free previously allocated memory. Add devm_kfree() to those failure paths. Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support") Fixes: 4fbcc1a4cb20 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION") Cc: stable@vger.kernel.org Signed-off-by: Martin Faltesek Reviewed-by: Guenter Roeck Reviewed-by: Krzysztof Kozlowski Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 03878a86747260210ef1da3542c9a6b8468980a1 Author: Martin Faltesek Date: Mon Jun 6 21:57:27 2022 -0500 nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION commit 77e5fe8f176a525523ae091d6fd0fbb8834c156d upstream. The first validation check for EVT_TRANSACTION has two different checks tied together with logical AND. One is a check for minimum packet length, and the other is for a valid aid_tag. If either condition is true (fails), then an error should be triggered. The fix is to change && to ||. Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support") Cc: stable@vger.kernel.org Signed-off-by: Martin Faltesek Reviewed-by: Guenter Roeck Reviewed-by: Krzysztof Kozlowski Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 2e6e05be2e3b5fd2401630dae7c3ebd719c998ee Author: Sergey Shtylyov Date: Wed Jun 8 22:51:07 2022 +0300 ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files commit 72aad489f992871e908ff6d9055b26c6366fb864 upstream. The {dma|pio}_mode sysfs files are incorrectly documented as having a list of the supported DMA/PIO transfer modes, while the corresponding fields of the *struct* ata_device hold the transfer mode IDs, not masks. To match these docs, the {dma|pio}_mode (and even xfer_mode!) sysfs files are handled by the ata_bitfield_name_match() macro which leads to reading such kind of nonsense from them: $ cat /sys/class/ata_device/dev3.0/pio_mode XFER_UDMA_7, XFER_UDMA_6, XFER_UDMA_5, XFER_UDMA_4, XFER_MW_DMA_4, XFER_PIO_6, XFER_PIO_5, XFER_PIO_4, XFER_PIO_3, XFER_PIO_2, XFER_PIO_1, XFER_PIO_0 Using the correct ata_bitfield_name_search() macro fixes that: $ cat /sys/class/ata_device/dev3.0/pio_mode XFER_PIO_4 While fixing the file documentation, somewhat reword the {dma|pio}_mode file doc and add a note about being mostly useful for PATA devices to the xfer_mode file doc... Fixes: d9027470b886 ("[libata] Add ATA transport class") Signed-off-by: Sergey Shtylyov Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman commit 1ac5e4691758aa7133fa6e22bc232ea5eb04e8a1 Author: Shyam Prasad N Date: Tue May 31 12:31:05 2022 +0000 cifs: return errors during session setup during reconnects commit 8ea21823aa584b55ba4b861307093b78054b0c1b upstream. During reconnects, we check the return value from cifs_negotiate_protocol, and have handlers for both success and failures. But if that passes, and cifs_setup_session returns any errors other than -EACCES, we do not handle that. This fix adds a handler for that, so that we don't go ahead and try a tree_connect on a failed session. Signed-off-by: Shyam Prasad N Reviewed-by: Enzo Matsumiya Cc: stable@vger.kernel.org Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 83be2cc35967eb41b8680992cfb5851f15b20273 Author: huangwenhui Date: Tue Jun 7 14:56:31 2022 +0800 ALSA: hda/conexant - Fix loopback issue with CX20632 commit d5ea7544c32ba27c2c5826248e4ff58bd50a2518 upstream. On a machine with CX20632, Alsamixer doesn't have 'Loopback Mixing' and 'Line'. Signed-off-by: huangwenhui Cc: Link: https://lore.kernel.org/r/20220607065631.10708-1-huangwenhuia@uniontech.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 29c3f932b422d92115e260a250fd910d46cd0c09 Author: Xie Yongji Date: Thu May 5 18:09:10 2022 +0800 vringh: Fix loop descriptors check in the indirect cases [ Upstream commit dbd29e0752286af74243cf891accf472b2f3edd8 ] We should use size of descriptor chain to test loop condition in the indirect case. And another statistical count is also introduced for indirect descriptors to avoid conflict with the statistical count of direct descriptors. Fixes: f87d0fbb5798 ("vringh: host-side implementation of virtio rings.") Signed-off-by: Xie Yongji Signed-off-by: Fam Zheng Message-Id: <20220505100910.137-1-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: Sasha Levin commit 3966522c6bf3cc95b3911c75dfc3c131ba577ed9 Author: Kees Cook Date: Wed May 18 13:52:23 2022 -0700 nodemask: Fix return values to be unsigned [ Upstream commit 0dfe54071d7c828a02917b595456bfde1afdddc9 ] The nodemask routines had mixed return values that provided potentially signed return values that could never happen. This was leading to the compiler getting confusing about the range of possible return values (it was thinking things could be negative where they could not be). Fix all the nodemask routines that should be returning unsigned (or bool) values. Silences: mm/swapfile.c: In function ‘setup_swap_info’: mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds of ‘struct plist_node[]’ [-Werror=array-bounds] 2291 | p->avail_lists[i].prio = 1; | ~~~~~~~~~~~~~~^~~ In file included from mm/swapfile.c:16: ./include/linux/swap.h:292:27: note: while referencing ‘avail_lists’ 292 | struct plist_node avail_lists[]; /* | ^~~~~~~~~~~ Reported-by: Christophe de Dinechin Link: https://lore.kernel.org/lkml/20220414150855.2407137-3-dinechin@redhat.com/ Cc: Alexey Dobriyan Cc: Yury Norov Cc: Andy Shevchenko Cc: Rasmus Villemoes Cc: Andrew Morton Cc: Zhen Lei Signed-off-by: Kees Cook Signed-off-by: Yury Norov Signed-off-by: Sasha Levin commit 67e403136a0e1a55fef6a05f103a3979a39ad3fd Author: Yu Kuai Date: Sat May 21 15:37:47 2022 +0800 nbd: fix io hung while disconnecting device [ Upstream commit 09dadb5985023e27d4740ebd17e6fea4640110e5 ] In our tests, "qemu-nbd" triggers a io hung: INFO: task qemu-nbd:11445 blocked for more than 368 seconds. Not tainted 5.18.0-rc3-next-20220422-00003-g2176915513ca #884 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:qemu-nbd state:D stack: 0 pid:11445 ppid: 1 flags:0x00000000 Call Trace: __schedule+0x480/0x1050 ? _raw_spin_lock_irqsave+0x3e/0xb0 schedule+0x9c/0x1b0 blk_mq_freeze_queue_wait+0x9d/0xf0 ? ipi_rseq+0x70/0x70 blk_mq_freeze_queue+0x2b/0x40 nbd_add_socket+0x6b/0x270 [nbd] nbd_ioctl+0x383/0x510 [nbd] blkdev_ioctl+0x18e/0x3e0 __x64_sys_ioctl+0xac/0x120 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd8ff706577 RSP: 002b:00007fd8fcdfebf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000040000000 RCX: 00007fd8ff706577 RDX: 000000000000000d RSI: 000000000000ab00 RDI: 000000000000000f RBP: 000000000000000f R08: 000000000000fbe8 R09: 000055fe497c62b0 R10: 00000002aff20000 R11: 0000000000000246 R12: 000000000000006d R13: 0000000000000000 R14: 00007ffe82dc5e70 R15: 00007fd8fcdff9c0 "qemu-ndb -d" will call ioctl 'NBD_DISCONNECT' first, however, following message was found: block nbd0: Send disconnect failed -32 Which indicate that something is wrong with the server. Then, "qemu-nbd -d" will call ioctl 'NBD_CLEAR_SOCK', however ioctl can't clear requests after commit 2516ab1543fd("nbd: only clear the queue on device teardown"). And in the meantime, request can't complete through timeout because nbd_xmit_timeout() will always return 'BLK_EH_RESET_TIMER', which means such request will never be completed in this situation. Now that the flag 'NBD_CMD_INFLIGHT' can make sure requests won't complete multiple times, switch back to call nbd_clear_sock() in nbd_clear_sock_ioctl(), so that inflight requests can be cleared. Signed-off-by: Yu Kuai Reviewed-by: Josef Bacik Link: https://lore.kernel.org/r/20220521073749.3146892-5-yukuai3@huawei.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 165cf2e0019fa6cedc75b456490c41494c34abb4 Author: Yu Kuai Date: Sat May 21 15:37:45 2022 +0800 nbd: fix race between nbd_alloc_config() and module removal [ Upstream commit c55b2b983b0fa012942c3eb16384b2b722caa810 ] When nbd module is being removing, nbd_alloc_config() may be called concurrently by nbd_genl_connect(), although try_module_get() will return false, but nbd_alloc_config() doesn't handle it. The race may lead to the leak of nbd_config and its related resources (e.g, recv_workq) and oops in nbd_read_stat() due to the unload of nbd module as shown below: BUG: kernel NULL pointer dereference, address: 0000000000000040 Oops: 0000 [#1] SMP PTI CPU: 5 PID: 13840 Comm: kworker/u17:33 Not tainted 5.14.0+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Workqueue: knbd16-recv recv_work [nbd] RIP: 0010:nbd_read_stat.cold+0x130/0x1a4 [nbd] Call Trace: recv_work+0x3b/0xb0 [nbd] process_one_work+0x1ed/0x390 worker_thread+0x4a/0x3d0 kthread+0x12a/0x150 ret_from_fork+0x22/0x30 Fixing it by checking the return value of try_module_get() in nbd_alloc_config(). As nbd_alloc_config() may return ERR_PTR(-ENODEV), assign nbd->config only when nbd_alloc_config() succeeds to ensure the value of nbd->config is binary (valid or NULL). Also adding a debug message to check the reference counter of nbd_config during module removal. Signed-off-by: Hou Tao Signed-off-by: Yu Kuai Reviewed-by: Josef Bacik Link: https://lore.kernel.org/r/20220521073749.3146892-3-yukuai3@huawei.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 8a1435c862ea09b06be7acda325128dc08458e25 Author: Yu Kuai Date: Sat May 21 15:37:44 2022 +0800 nbd: call genl_unregister_family() first in nbd_cleanup() [ Upstream commit 06c4da89c24e7023ea448cadf8e9daf06a0aae6e ] Otherwise there may be race between module removal and the handling of netlink command, which can lead to the oops as shown below: BUG: kernel NULL pointer dereference, address: 0000000000000098 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 31299 Comm: nbd-client Tainted: G E 5.14.0-rc4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:down_write+0x1a/0x50 Call Trace: start_creating+0x89/0x130 debugfs_create_dir+0x1b/0x130 nbd_start_device+0x13d/0x390 [nbd] nbd_genl_connect+0x42f/0x748 [nbd] genl_family_rcv_msg_doit.isra.0+0xec/0x150 genl_rcv_msg+0xe5/0x1e0 netlink_rcv_skb+0x55/0x100 genl_rcv+0x29/0x40 netlink_unicast+0x1a8/0x250 netlink_sendmsg+0x21b/0x430 ____sys_sendmsg+0x2a4/0x2d0 ___sys_sendmsg+0x81/0xc0 __sys_sendmsg+0x62/0xb0 __x64_sys_sendmsg+0x1f/0x30 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: nbd(E-) Signed-off-by: Hou Tao Signed-off-by: Yu Kuai Reviewed-by: Josef Bacik Link: https://lore.kernel.org/r/20220521073749.3146892-2-yukuai3@huawei.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 35b2527da36bf541dd7581d65a9826cbd18236c6 Author: Masahiro Yamada Date: Tue May 24 01:46:22 2022 +0900 modpost: fix undefined behavior of is_arm_mapping_symbol() [ Upstream commit d6b732666a1bae0df3c3ae06925043bba34502b1 ] The return value of is_arm_mapping_symbol() is unpredictable when "$" is passed in. strchr(3) says: The strchr() and strrchr() functions return a pointer to the matched character or NULL if the character is not found. The terminating null byte is considered part of the string, so that if c is specified as '\0', these functions return a pointer to the terminator. When str[1] is '\0', strchr("axtd", str[1]) is not NULL, and str[2] is referenced (i.e. buffer overrun). Test code --------- char str1[] = "abc"; char str2[] = "ab"; strcpy(str1, "$"); strcpy(str2, "$"); printf("test1: %d\n", is_arm_mapping_symbol(str1)); printf("test2: %d\n", is_arm_mapping_symbol(str2)); Result ------ test1: 0 test2: 1 Signed-off-by: Masahiro Yamada Reviewed-by: Nick Desaulniers Signed-off-by: Sasha Levin commit 16a0f0b63c4c7eb46fc4c3f00bf2836e6ee46a9f Author: Gong Yuanjun Date: Tue May 17 17:57:00 2022 +0800 drm/radeon: fix a possible null pointer dereference [ Upstream commit a2b28708b645c5632dc93669ab06e97874c8244f ] In radeon_fp_native_mode(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. The failure status of drm_cvt_mode() on the other path is checked too. Signed-off-by: Gong Yuanjun Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit a7afaf7916d08ed6c9cc4267962d3f0912291f64 Author: Michal Kubecek Date: Mon May 23 22:05:24 2022 +0200 Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process" [ Upstream commit 9c90c9b3e50e16d03c7f87d63e9db373974781e0 ] This reverts commit 4dc2a5a8f6754492180741facf2a8787f2c415d7. A non-zero return value from pfkey_broadcast() does not necessarily mean an error occurred as this function returns -ESRCH when no registered listener received the message. In particular, a call with BROADCAST_PROMISC_ONLY flag and null one_sk argument can never return zero so that this commit in fact prevents processing any PF_KEY message. One visible effect is that racoon daemon fails to find encryption algorithms like aes and refuses to start. Excluding -ESRCH return value would fix this but it's not obvious that we really want to bail out here and most other callers of pfkey_broadcast() also ignore the return value. Also, as pointed out by Steffen Klassert, PF_KEY is kind of deprecated and newer userspace code should use netlink instead so that we should only disturb the code for really important fixes. v2: add a comment explaining why is the return value ignored Signed-off-by: Michal Kubecek Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin commit 9f8131fd70cb687269744bc6712095e41ab65fb0 Author: Guoqing Jiang Date: Fri Apr 29 16:49:09 2022 +0800 md: protect md_unregister_thread from reentrancy [ Upstream commit 1e267742283a4b5a8ca65755c44166be27e9aa0f ] Generally, the md_unregister_thread is called with reconfig_mutex, but raid_message in dm-raid doesn't hold reconfig_mutex to unregister thread, so md_unregister_thread can be called simulitaneously from two call sites in theory. Then after previous commit which remove the protection of reconfig_mutex for md_unregister_thread completely, the potential issue could be worse than before. Let's take pers_lock at the beginning of function to ensure reentrancy. Reported-by: Donald Buczek Signed-off-by: Guoqing Jiang Signed-off-by: Song Liu Signed-off-by: Sasha Levin commit a393b6fa61ac6066d2953d4bb92c34cb262d6c43 Author: Hao Luo Date: Mon May 16 12:09:51 2022 -0700 kernfs: Separate kernfs_pr_cont_buf and rename_lock. [ Upstream commit 1a702dc88e150487c9c173a249b3d236498b9183 ] Previously the protection of kernfs_pr_cont_buf was piggy backed by rename_lock, which means that pr_cont() needs to be protected under rename_lock. This can cause potential circular lock dependencies. If there is an OOM, we have the following call hierarchy: -> cpuset_print_current_mems_allowed() -> pr_cont_cgroup_name() -> pr_cont_kernfs_name() pr_cont_kernfs_name() will grab rename_lock and call printk. So we have the following lock dependencies: kernfs_rename_lock -> console_sem Sometimes, printk does a wakeup before releasing console_sem, which has the dependence chain: console_sem -> p->pi_lock -> rq->lock Now, imagine one wants to read cgroup_name under rq->lock, for example, printing cgroup_name in a tracepoint in the scheduler code. They will be holding rq->lock and take rename_lock: rq->lock -> kernfs_rename_lock Now they will deadlock. A prevention to this circular lock dependency is to separate the protection of pr_cont_buf from rename_lock. In principle, rename_lock is to protect the integrity of cgroup name when copying to buf. Once pr_cont_buf has got its content, rename_lock can be dropped. So it's safe to drop rename_lock after kernfs_name_locked (and kernfs_path_from_node_locked) and rely on a dedicated pr_cont_lock to protect pr_cont_buf. Acked-by: Tejun Heo Signed-off-by: Hao Luo Link: https://lore.kernel.org/r/20220516190951.3144144-1-haoluo@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 66412d89a5d6185c91de741d5310416c2b6d8568 Author: John Ogness Date: Fri May 6 23:39:24 2022 +0206 serial: msm_serial: disable interrupts in __msm_console_write() [ Upstream commit aabdbb1b7a5819e18c403334a31fb0cc2c06ad41 ] __msm_console_write() assumes that interrupts are disabled, but with threaded console printers it is possible that the write() callback of the console is called with interrupts enabled. Explicitly disable interrupts using local_irq_save() to preserve the assumed context. Reported-by: Marek Szyprowski Reviewed-by: Petr Mladek Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20220506213324.470461-1-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 277faa442fe0c59f418ac53f47a78e1266addd65 Author: Wang Cheng Date: Mon May 16 17:22:41 2022 +0800 staging: rtl8712: fix uninit-value in r871xu_drv_init() [ Upstream commit 0458e5428e5e959d201a40ffe71d762a79ecedc4 ] When 'tmpU1b' returns from r8712_read8(padapter, EE_9346CR) is 0, 'mac[6]' will not be initialized. BUG: KMSAN: uninit-value in r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541 r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 really_probe+0x653/0x14b0 drivers/base/dd.c:596 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293 really_probe+0x653/0x14b0 drivers/base/dd.c:596 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_new_device+0x1b8e/0x2950 drivers/usb/core/hub.c:2566 hub_port_connect drivers/usb/core/hub.c:5358 [inline] hub_port_connect_change drivers/usb/core/hub.c:5502 [inline] port_event drivers/usb/core/hub.c:5660 [inline] hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5742 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2307 worker_thread+0x10b3/0x21e0 kernel/workqueue.c:2454 kthread+0x3c7/0x500 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 Local variable mac created at: r871xu_drv_init+0x1771/0x3070 drivers/staging/rtl8712/usb_intf.c:394 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 KMSAN: uninit-value in r871xu_drv_init https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8 Reported-by: Tested-by: Reviewed-by: Dan Carpenter Signed-off-by: Wang Cheng Link: https://lore.kernel.org/r/14c3886173dfa4597f0704547c414cfdbcd11d16.1652618244.git.wanngchenng@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 3ba2db7cc27d4f69c1feebd0691f933e7a125542 Author: Andre Przywara Date: Fri May 6 17:25:22 2022 +0100 clocksource/drivers/sp804: Avoid error on multiple instances [ Upstream commit a98399cbc1e05f7b977419f03905501d566cf54e ] When a machine sports more than one SP804 timer instance, we only bring up the first one, since multiple timers of the same kind are not useful to Linux. As this is intentional behaviour, we should not return an error message, as we do today: =============== [ 0.000800] Failed to initialize '/bus@8000000/motherboard-bus@8000000/iofpga-bus@300000000/timer@120000': -22 =============== Replace the -EINVAL return with a debug message and return 0 instead. Also we do not reach the init function anymore if the DT node is disabled (as this is now handled by OF_DECLARE), so remove the explicit check for that case. This fixes a long standing bogus error when booting ARM's fastmodels. Signed-off-by: Andre Przywara Reviewed-by: Robin Murphy Link: https://lore.kernel.org/r/20220506162522.3675399-1-andre.przywara@arm.com Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin commit 6e721f3ad0535b24f19a62420f4da95212cf069c Author: bumwoo lee Date: Wed Apr 27 12:00:05 2022 +0900 extcon: Modify extcon device to be created after driver data is set [ Upstream commit 5dcc2afe716d69f5112ce035cb14f007461ff189 ] Currently, someone can invoke the sysfs such as state_show() intermittently before dev_set_drvdata() is done. And it can be a cause of kernel Oops because of edev is Null at that time. So modified the driver registration to after setting drviver data. - Oops's backtrace. Backtrace: [] (state_show) from [] (dev_attr_show) [] (dev_attr_show) from [] (sysfs_kf_seq_show) [] (sysfs_kf_seq_show) from [] (kernfs_seq_show) [] (kernfs_seq_show) from [] (seq_read) [] (seq_read) from [] (kernfs_fop_read) [] (kernfs_fop_read) from [] (__vfs_read) [] (__vfs_read) from [] (vfs_read) [] (vfs_read) from [] (ksys_read) [] (ksys_read) from [] (sys_read) [] (sys_read) from [] (__sys_trace_return) Signed-off-by: bumwoo lee Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin commit 42ecf1aa3b8dd428bcc84dc176805ffc9722d0d1 Author: Shuah Khan Date: Fri Apr 29 15:09:13 2022 -0600 misc: rtsx: set NULL intfdata when probe fails [ Upstream commit f861d36e021e1ac4a0a2a1f6411d623809975d63 ] rtsx_usb_probe() doesn't call usb_set_intfdata() to null out the interface pointer when probe fails. This leaves a stale pointer. Noticed the missing usb_set_intfdata() while debugging an unrelated invalid DMA mapping problem. Fix it with a call to usb_set_intfdata(..., NULL). Signed-off-by: Shuah Khan Link: https://lore.kernel.org/r/20220429210913.46804-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit efb15ff4a77fe053c941281775fefa91c87770e0 Author: Marek Szyprowski Date: Thu May 5 12:46:18 2022 +0200 usb: dwc2: gadget: don't reset gadget's driver->bus [ Upstream commit 3120aac6d0ecd9accf56894aeac0e265f74d3d5a ] UDC driver should not touch gadget's driver internals, especially it should not reset driver->bus. This wasn't harmful so far, but since commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget subsystem got it's own bus and messing with ->bus triggers the following NULL pointer dereference: dwc2 12480000.hsotg: bound driver g_ether 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: ... CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862 Hardware name: Samsung Exynos (Flattened Device Tree) PC is at module_add_driver+0x44/0xe8 LR is at sysfs_do_create_link_sd+0x84/0xe0 ... Process modprobe (pid: 620, stack limit = 0x(ptrval)) ... module_add_driver from bus_add_driver+0xf4/0x1e4 bus_add_driver from driver_register+0x78/0x10c driver_register from usb_gadget_register_driver_owner+0x40/0xb4 usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0 do_one_initcall from do_init_module+0x44/0x1c8 do_init_module from load_module+0x19b8/0x1b9c load_module from sys_finit_module+0xdc/0xfc sys_finit_module from ret_fast_syscall+0x0/0x54 Exception stack(0xf1771fa8 to 0xf1771ff0) ... dwc2 12480000.hsotg: new device is high-speed ---[ end trace 0000000000000000 ]--- Fix this by removing driver->bus entry reset. Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20220505104618.22729-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 7b063f1edf0af412030b971e1005b91fd0a09efd Author: Evan Green Date: Thu Apr 21 10:39:27 2022 -0700 USB: hcd-pci: Fully suspend across freeze/thaw cycle [ Upstream commit 63acaa8e9c65dc34dc249440216f8e977f5d2748 ] The documentation for the freeze() method says that it "should quiesce the device so that it doesn't generate IRQs or DMA". The unspoken consequence of not doing this is that MSIs aimed at non-boot CPUs may get fully lost if they're sent during the period where the target CPU is offline. The current callbacks for USB HCD do not fully quiesce interrupts, specifically on XHCI. Change to use the full suspend/resume flow for freeze/thaw to ensure interrupts are fully quiesced. This fixes issues where USB devices fail to thaw during hibernation because XHCI misses its interrupt and cannot recover. Acked-by: Alan Stern Signed-off-by: Evan Green Link: https://lore.kernel.org/r/20220421103751.v3.2.I8226c7fdae88329ef70957b96a39b346c69a914e@changeid Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit a3d380188bde8900c3f604e82b56572896499124 Author: Duoming Zhou Date: Sun Apr 17 20:03:05 2022 +0800 drivers: usb: host: Fix deadlock in oxu_bus_suspend() [ Upstream commit 4d378f2ae58138d4c55684e1d274e7dd94aa6524 ] There is a deadlock in oxu_bus_suspend(), which is shown below: (Thread 1) | (Thread 2) | timer_action() oxu_bus_suspend() | mod_timer() spin_lock_irq() //(1) | (wait a time) ... | oxu_watchdog() del_timer_sync() | spin_lock_irq() //(2) (wait timer to stop) | ... We hold oxu->lock in position (1) of thread 1, and use del_timer_sync() to wait timer to stop, but timer handler also need oxu->lock in position (2) of thread 2. As a result, oxu_bus_suspend() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irq(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou Link: https://lore.kernel.org/r/20220417120305.64577-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 85e20f8bd31a46d8c60103d0274a8ebe8f47f2b2 Author: Duoming Zhou Date: Sun Apr 17 19:16:26 2022 +0800 drivers: tty: serial: Fix deadlock in sa1100_set_termios() [ Upstream commit 62b2caef400c1738b6d22f636c628d9f85cd4c4c ] There is a deadlock in sa1100_set_termios(), which is shown below: (Thread 1) | (Thread 2) | sa1100_enable_ms() sa1100_set_termios() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | sa1100_timeout() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold sport->port.lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need sport->port.lock in position (2) of thread 2. As a result, sa1100_set_termios() will block forever. This patch moves del_timer_sync() before spin_lock_irqsave() in order to prevent the deadlock. Signed-off-by: Duoming Zhou Link: https://lore.kernel.org/r/20220417111626.7802-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 7bffda1560a6f255fdf504e059fbbdb5d46b9e44 Author: Zhen Ni Date: Wed Mar 2 11:37:16 2022 +0800 USB: host: isp116x: check return value after calling platform_get_resource() [ Upstream commit 134a3408c2d3f7e23eb0e4556e0a2d9f36c2614e ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Zhen Ni Link: https://lore.kernel.org/r/20220302033716.31272-1-nizhen@uniontech.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 381045dc64d23a2229c47c5524c06bfc33d34446 Author: Duoming Zhou Date: Sun Apr 17 22:16:41 2022 +0800 drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop() [ Upstream commit 9b6bdbd9337de3917945847bde262a34a87a6303 ] There is a deadlock in rtllib_beacons_stop(), which is shown below: (Thread 1) | (Thread 2) | rtllib_send_beacon() rtllib_beacons_stop() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | rtllib_send_beacon_cb() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold ieee->beacon_lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need ieee->beacon_lock in position (2) of thread 2. As a result, rtllib_beacons_stop() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou Link: https://lore.kernel.org/r/20220417141641.124388-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit d703d912a985c1c5b50dd38c3181fc3540fa77cb Author: Huang Guobin Date: Thu Mar 31 17:10:05 2022 +0800 tty: Fix a possible resource leak in icom_probe [ Upstream commit ee157a79e7c82b01ae4c25de0ac75899801f322c ] When pci_read_config_dword failed, call pci_release_regions() and pci_disable_device() to recycle the resource previously allocated. Reviewed-by: Jiri Slaby Signed-off-by: Huang Guobin Link: https://lore.kernel.org/r/20220331091005.3290753-1-huangguobin4@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 078212ad15dbd88840c82c97f12c93d83703c8fd Author: Zheyu Ma Date: Sun Apr 10 19:48:14 2022 +0800 tty: synclink_gt: Fix null-pointer-dereference in slgt_clean() [ Upstream commit 689ca31c542687709ba21ec2195c1fbce34fd029 ] When the driver fails at alloc_hdlcdev(), and then we remove the driver module, we will get the following splat: [ 25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI [ 25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17] [ 25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0 [ 25.077709] Call Trace: [ 25.077924] [ 25.078108] unregister_hdlc_device+0x16/0x30 [ 25.078481] slgt_cleanup+0x157/0x9f0 [synclink_gt] Fix this by checking whether the 'info->netdev' is a null pointer first. Reviewed-by: Jiri Slaby Signed-off-by: Zheyu Ma Link: https://lore.kernel.org/r/20220410114814.3920474-1-zheyuma97@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 9a04367c8fa1b593806096d146ba4cfb4a49a2ba Author: Kees Cook Date: Wed Feb 16 12:15:03 2022 -0800 lkdtm/usercopy: Expand size of "out of frame" object [ Upstream commit f387e86d3a74407bdd9c5815820ac9d060962840 ] To be sufficiently out of range for the usercopy test to see the lifetime mismatch, expand the size of the "bad" buffer, which will let it be beyond current_stack_pointer regardless of stack growth direction. Paired with the recent addition of stack depth checking under CONFIG_HARDENED_USERCOPY=y, this will correctly start tripping again. Reported-by: Muhammad Usama Anjum Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Reviewed-by: Muhammad Usama Anjum Link: https://lore.kernel.org/lkml/762faf1b-0443-5ddf-4430-44a20cf2ec4d@collabora.com/ Signed-off-by: Kees Cook Signed-off-by: Sasha Levin commit 273428016292967bebb3c3ee45183e26e3a903fc Author: Xiaoke Wang Date: Sat Mar 5 11:14:05 2022 +0800 iio: dummy: iio_simple_dummy: check the return value of kstrdup() [ Upstream commit ba93642188a6fed754bf7447f638bc410e05a929 ] kstrdup() is also a memory allocation-related function, it returns NULL when some memory errors happen. So it is better to check the return value of it so to catch the memory error in time. Besides, there should have a kfree() to clear up the allocation if we get a failure later in this function to prevent memory leak. Signed-off-by: Xiaoke Wang Link: https://lore.kernel.org/r/tencent_C920CFCC33B9CC1C63141FE1334A39FF8508@qq.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit 7c49390c795b89f440c554fe6465e59ce785a111 Author: Linus Torvalds Date: Wed Jun 8 16:59:29 2022 -0700 drm: imx: fix compiler warning with gcc-12 [ Upstream commit 7aefd8b53815274f3ef398d370a3c9b27dd9f00c ] Gcc-12 correctly warned about this code using a non-NULL pointer as a truth value: drivers/gpu/drm/imx/ipuv3-crtc.c: In function ‘ipu_crtc_disable_planes’: drivers/gpu/drm/imx/ipuv3-crtc.c:72:21: error: the comparison will always evaluate as ‘true’ for the address of ‘plane’ will never be NULL [-Werror=address] 72 | if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base) | ^ due to the extraneous '&' address-of operator. Philipp Zabel points out that The mistake had no adverse effect since the following condition doesn't actually dereference the NULL pointer, but the intent of the code was obviously to check for it, not to take the address of the member. Fixes: eb8c88808c83 ("drm/imx: add deferred plane disabling") Acked-by: Philipp Zabel Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 1fd12298a0e0ca23478c715e672ee64c85670584 Author: Miaoqian Lin Date: Tue Jun 7 08:11:43 2022 +0400 net: altera: Fix refcount leak in altera_tse_mdio_create [ Upstream commit 11ec18b1d8d92b9df307d31950dcba0b3dd7283c ] Every iteration of for_each_child_of_node() decrements the reference count of the previous node. When break from a for_each_child_of_node() loop, we need to explicitly call of_node_put() on the child node when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver") Signed-off-by: Miaoqian Lin Link: https://lore.kernel.org/r/20220607041144.7553-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 64aef8efe96c1616142c4476a05731306fc4494e Author: Masahiro Yamada Date: Mon Jun 6 13:53:55 2022 +0900 net: ipv6: unexport __init-annotated seg6_hmac_init() [ Upstream commit 5801f064e35181c71857a80ff18af4dbec3c5f5c ] EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the caller (net/ipv6/seg6.c) and the callee (net/ipv6/seg6_hmac.c) belong to the same module. It seems an internal function call in ipv6.ko. Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support") Reported-by: Stephen Rothwell Signed-off-by: Masahiro Yamada Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit e53cd3814504b2cadaba4d5a8a07eeea9ddacd03 Author: Masahiro Yamada Date: Mon Jun 6 13:53:54 2022 +0900 net: xfrm: unexport __init-annotated xfrm4_protocol_init() [ Upstream commit 4a388f08d8784af48f352193d2b72aaf167a57a1 ] EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, net/ipv4/xfrm4_policy.c is never compiled as modular. (CONFIG_XFRM is boolean) Fixes: 2f32b51b609f ("xfrm: Introduce xfrm_input_afinfo to access the the callbacks properly") Reported-by: Stephen Rothwell Signed-off-by: Masahiro Yamada Acked-by: Steffen Klassert Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ab64ec2c75683f30ccde9eaaf0761002f901aa12 Author: Masahiro Yamada Date: Mon Jun 6 13:53:53 2022 +0900 net: mdio: unexport __init-annotated mdio_bus_init() [ Upstream commit 35b42dce619701f1300fb8498dae82c9bb1f0263 ] EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, drivers/net/phy/phy_device.c is never compiled as modular. (CONFIG_PHYLIB is boolean) Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Reported-by: Stephen Rothwell Signed-off-by: Masahiro Yamada Reviewed-by: Florian Fainelli Reviewed-by: Russell King (Oracle) Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit d0c01793097e4f8a86e2187bf7302161b21c3081 Author: Chuck Lever Date: Tue Jun 7 16:47:52 2022 -0400 SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer() [ Upstream commit 6c254bf3b637dd4ef4f78eb78c7447419c0161d7 ] I found that NFSD's new NFSv3 READDIRPLUS XDR encoder was screwing up right at the end of the page array. xdr_get_next_encode_buffer() does not compute the value of xdr->end correctly: * The check to see if we're on the final available page in xdr->buf needs to account for the space consumed by @nbytes. * The new xdr->end value needs to account for the portion of @nbytes that is to be encoded into the previous buffer. Fixes: 2825a7f90753 ("nfsd4: allow encoding across page boundaries") Signed-off-by: Chuck Lever Reviewed-by: NeilBrown Reviewed-by: J. Bruce Fields Signed-off-by: Sasha Levin commit 58f2a2d14fa9ff6cf31997b7dbd094daa75eac29 Author: Gal Pressman Date: Mon Jun 6 14:57:18 2022 +0300 net/mlx4_en: Fix wrong return value on ioctl EEPROM query failure [ Upstream commit f5826c8c9d57210a17031af5527056eefdc2b7eb ] The ioctl EEPROM query wrongly returns success on read failures, fix that by returning the appropriate error code. Fixes: 7202da8b7f71 ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support") Signed-off-by: Gal Pressman Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20220606115718.14233-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit a4d3e5f1d7d4f8b5e3834fec0f057a762c55806b Author: Miaoqian Lin Date: Wed Jun 1 12:59:26 2022 +0400 ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe [ Upstream commit 10d6bdf532902be1d8aa5900b3c03c5671612aa2 ] of_find_device_by_node() takes reference, we should use put_device() to release it when not need anymore. Add missing put_device() to avoid refcount leak. Fixes: 43f01da0f279 ("MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.") Signed-off-by: Miaoqian Lin Reviewed-by: Sergey Shtylyov Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin commit 8e3943c50764dc7c5f25911970c3ff062ec1f18c Author: Kinglong Mee Date: Sun May 22 20:36:48 2022 +0800 xprtrdma: treat all calls not a bcall when bc_serv is NULL [ Upstream commit 11270e7ca268e8d61b5d9e5c3a54bd1550642c9c ] When a rdma server returns a fault format reply, nfs v3 client may treats it as a bcall when bc service is not exist. The debug message at rpcrdma_bc_receive_call are, [56579.837169] RPC: rpcrdma_bc_receive_call: callback XID 00000001, length=20 [56579.837174] RPC: rpcrdma_bc_receive_call: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 After that, rpcrdma_bc_receive_call will meets NULL pointer as, [ 226.057890] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 ... [ 226.058704] RIP: 0010:_raw_spin_lock+0xc/0x20 ... [ 226.059732] Call Trace: [ 226.059878] rpcrdma_bc_receive_call+0x138/0x327 [rpcrdma] [ 226.060011] __ib_process_cq+0x89/0x170 [ib_core] [ 226.060092] ib_cq_poll_work+0x26/0x80 [ib_core] [ 226.060257] process_one_work+0x1a7/0x360 [ 226.060367] ? create_worker+0x1a0/0x1a0 [ 226.060440] worker_thread+0x30/0x390 [ 226.060500] ? create_worker+0x1a0/0x1a0 [ 226.060574] kthread+0x116/0x130 [ 226.060661] ? kthread_flush_work_fn+0x10/0x10 [ 226.060724] ret_from_fork+0x35/0x40 ... Signed-off-by: Kinglong Mee Reviewed-by: Chuck Lever Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 0de029454d42ad60d7f4234d84862d105a48c6d6 Author: Yang Yingliang Date: Fri May 13 18:05:41 2022 +0800 video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove() [ Upstream commit d87ad457f7e1b8d2492ca5b1531eb35030a1cc8f ] In pxa3xx_gcu_probe(), the sequence of error lable is wrong, it will leads some resource leaked, so adjust the sequence to handle the error correctly, and if pxa3xx_gcu_add_buffer() fails, pxa3xx_gcu_free_buffers() need be called. In pxa3xx_gcu_remove(), add missing clk_disable_unpreprare(). Signed-off-by: Yang Yingliang Signed-off-by: Helge Deller Signed-off-by: Sasha Levin commit 816801876103aae9afee7b686a72068ed6afaad0 Author: Greg Ungerer Date: Fri May 13 17:27:39 2022 +1000 m68knommu: fix undefined reference to `_init_sp' [ Upstream commit a71b9e66fee47c59b3ec34e652b5c23bc6550794 ] When configuring a nommu classic m68k system enabling the uboot parameter passing support (CONFIG_UBOOT) will produce the following compile error: m68k-linux-ld: arch/m68k/kernel/uboot.o: in function `process_uboot_commandline': uboot.c:(.init.text+0x32): undefined reference to `_init_sp' The logic to support this option is only used on ColdFire based platforms (in its head.S startup code). So make the selection of this option depend on building for a ColdFire based platform. Reported-by: kernel test robot Reviewed-by: Geert Uytterhoeven Acked-by: Geert Uytterhoeven Signed-off-by: Greg Ungerer Signed-off-by: Sasha Levin commit bcbca17f63296e1cc7fd93ee538bfba0893492a7 Author: Greg Ungerer Date: Wed Apr 20 23:27:47 2022 +1000 m68knommu: set ZERO_PAGE() to the allocated zeroed page [ Upstream commit dc068f46217970d9516f16cd37972a01d50dc055 ] The non-MMU m68k pagetable ZERO_PAGE() macro is being set to the somewhat non-sensical value of "virt_to_page(0)". The zeroth page is not in any way guaranteed to be a page full of "0". So the result is that ZERO_PAGE() will almost certainly contain random values. We already allocate a real "empty_zero_page" in the mm setup code shared between MMU m68k and non-MMU m68k. It is just not hooked up to the ZERO_PAGE() macro for the non-MMU m68k case. Fix ZERO_PAGE() to use the allocated "empty_zero_page" pointer. I am not aware of any specific issues caused by the old code. Link: https://lore.kernel.org/linux-m68k/2a462b23-5b8e-bbf4-ec7d-778434a3b9d7@google.com/T/#t Reported-by: Hugh Dickens Signed-off-by: Greg Ungerer Signed-off-by: Sasha Levin commit d449c8277bda690b2afbbe008ccf7d4544f39f83 Author: Lucas Tanure Date: Wed Apr 13 10:14:10 2022 +0100 i2c: cadence: Increase timeout per message if necessary [ Upstream commit 96789dce043f5bff8b7d62aa28d52a7c59403a84 ] Timeout as 1 second sets an upper limit on the length of the transfer executed, but there is no maximum length of a write or read message set in i2c_adapter_quirks for this controller. This upper limit affects devices that require sending large firmware blobs over I2C. To remove that limitation, calculate the minimal time necessary, plus some wiggle room, for every message and use it instead of the default one second, if more than one second. Signed-off-by: Lucas Tanure Acked-by: Michal Simek Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 0816ec55fc0b2a4abe7048f13e6fac652670922a Author: Mark-PK Tsai Date: Tue Apr 26 20:24:06 2022 +0800 tracing: Avoid adding tracer option before update_tracer_options [ Upstream commit ef9188bcc6ca1d8a2ad83e826b548e6820721061 ] To prepare for support asynchronous tracer_init_tracefs initcall, avoid calling create_trace_option_files before __update_tracer_options. Otherwise, create_trace_option_files will show warning because some tracers in trace_types list are already in tr->topts. For example, hwlat_tracer call register_tracer in late_initcall, and global_trace.dir is already created in tracing_init_dentry, hwlat_tracer will be put into tr->topts. Then if the __update_tracer_options is executed after hwlat_tracer registered, create_trace_option_files find that hwlat_tracer is already in tr->topts. Link: https://lkml.kernel.org/r/20220426122407.17042-2-mark-pk.tsai@mediatek.com Link: https://lore.kernel.org/lkml/20220322133339.GA32582@xsang-OptiPlex-9020/ Reported-by: kernel test robot Signed-off-by: Mark-PK Tsai Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin commit be1f323fb9d9b14a505ca22d742d321769454de1 Author: Jun Miao Date: Tue Apr 19 09:39:10 2022 +0800 tracing: Fix sleeping function called from invalid context on RT kernel [ Upstream commit 12025abdc8539ed9d5014e2d647a3fd1bd3de5cd ] When setting bootparams="trace_event=initcall:initcall_start tp_printk=1" in the cmdline, the output_printk() was called, and the spin_lock_irqsave() was called in the atomic and irq disable interrupt context suitation. On the PREEMPT_RT kernel, these locks are replaced with sleepable rt-spinlock, so the stack calltrace will be triggered. Fix it by raw_spin_lock_irqsave when PREEMPT_RT and "trace_event=initcall:initcall_start tp_printk=1" enabled. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: [] try_to_wake_up+0x7e/0xba0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.1-rt17+ #19 34c5812404187a875f32bee7977f7367f9679ea7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: dump_stack_lvl+0x60/0x8c dump_stack+0x10/0x12 __might_resched.cold+0x11d/0x155 rt_spin_lock+0x40/0x70 trace_event_buffer_commit+0x2fa/0x4c0 ? map_vsyscall+0x93/0x93 trace_event_raw_event_initcall_start+0xbe/0x110 ? perf_trace_initcall_finish+0x210/0x210 ? probe_sched_wakeup+0x34/0x40 ? ttwu_do_wakeup+0xda/0x310 ? trace_hardirqs_on+0x35/0x170 ? map_vsyscall+0x93/0x93 do_one_initcall+0x217/0x3c0 ? trace_event_raw_event_initcall_level+0x170/0x170 ? push_cpu_stop+0x400/0x400 ? cblist_init_generic+0x241/0x290 kernel_init_freeable+0x1ac/0x347 ? _raw_spin_unlock_irq+0x65/0x80 ? rest_init+0xf0/0xf0 kernel_init+0x1e/0x150 ret_from_fork+0x22/0x30 Link: https://lkml.kernel.org/r/20220419013910.894370-1-jun.miao@intel.com Signed-off-by: Jun Miao Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin commit bed702566dcdb6ebe300bc0c62bf3600cf4d5874 Author: Gong Yuanjun Date: Thu Apr 7 12:26:57 2022 +0800 mips: cpc: Fix refcount leak in mips_cpc_default_phys_base [ Upstream commit 4107fa700f314592850e2c64608f6ede4c077476 ] Add the missing of_node_put() to release the refcount incremented by of_find_compatible_node(). Signed-off-by: Gong Yuanjun Reviewed-by: Serge Semin Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 7229bdf353a0ab9a22f8187e1f67d2edc0518286 Author: Leo Yan Date: Mon May 30 16:42:53 2022 +0800 perf c2c: Fix sorting in percent_rmt_hitm_cmp() [ Upstream commit b24192a17337abbf3f44aaa75e15df14a2d0016e ] The function percent_rmt_hitm_cmp() wrongly uses local HITMs for sorting remote HITMs. Since this function is to sort cache lines for remote HITMs, this patch changes to use 'rmt_hitm' field for correct sorting. Fixes: 9cb3500afc0980c5 ("perf c2c report: Add hitm/store percent related sort keys") Signed-off-by: Leo Yan Acked-by: Namhyung Kim Cc: Alexander Shishkin Cc: Ingo Molnar Cc: Jiri Olsa Cc: Joe Mario Cc: Mark Rutland Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20220530084253.750190-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit c348b0f8d035fc4bdc040796889beec7218bd1b8 Author: Eric Dumazet Date: Mon May 30 14:37:13 2022 -0700 tcp: tcp_rtx_synack() can be called from process context [ Upstream commit 0a375c822497ed6ad6b5da0792a12a6f1af10c0b ] Laurent reported the enclosed report [1] This bug triggers with following coditions: 0) Kernel built with CONFIG_DEBUG_PREEMPT=y 1) A new passive FastOpen TCP socket is created. This FO socket waits for an ACK coming from client to be a complete ESTABLISHED one. 2) A socket operation on this socket goes through lock_sock() release_sock() dance. 3) While the socket is owned by the user in step 2), a retransmit of the SYN is received and stored in socket backlog. 4) At release_sock() time, the socket backlog is processed while in process context. 5) A SYNACK packet is cooked in response of the SYN retransmit. 6) -> tcp_rtx_synack() is called in process context. Before blamed commit, tcp_rtx_synack() was always called from BH handler, from a timer handler. Fix this by using TCP_INC_STATS() & NET_INC_STATS() which do not assume caller is in non preemptible context. [1] BUG: using __this_cpu_add() in preemptible [00000000] code: epollpep/2180 caller is tcp_rtx_synack.part.0+0x36/0xc0 CPU: 10 PID: 2180 Comm: epollpep Tainted: G OE 5.16.0-0.bpo.4-amd64 #1 Debian 5.16.12-1~bpo11+1 Hardware name: Supermicro SYS-5039MC-H8TRF/X11SCD-F, BIOS 1.7 11/23/2021 Call Trace: dump_stack_lvl+0x48/0x5e check_preemption_disabled+0xde/0xe0 tcp_rtx_synack.part.0+0x36/0xc0 tcp_rtx_synack+0x8d/0xa0 ? kmem_cache_alloc+0x2e0/0x3e0 ? apparmor_file_alloc_security+0x3b/0x1f0 inet_rtx_syn_ack+0x16/0x30 tcp_check_req+0x367/0x610 tcp_rcv_state_process+0x91/0xf60 ? get_nohz_timer_target+0x18/0x1a0 ? lock_timer_base+0x61/0x80 ? preempt_count_add+0x68/0xa0 tcp_v4_do_rcv+0xbd/0x270 __release_sock+0x6d/0xb0 release_sock+0x2b/0x90 sock_setsockopt+0x138/0x1140 ? __sys_getsockname+0x7e/0xc0 ? aa_sk_perm+0x3e/0x1a0 __sys_setsockopt+0x198/0x1e0 __x64_sys_setsockopt+0x21/0x30 do_syscall_64+0x38/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path") Signed-off-by: Eric Dumazet Reported-by: Laurent Fasnacht Acked-by: Neal Cardwell Link: https://lore.kernel.org/r/20220530213713.601888-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 25ff1e3a1351c0d936dd1ac2f9e58231ea1510c9 Author: Zhihao Cheng Date: Tue May 10 20:31:26 2022 +0800 ubi: ubi_create_volume: Fix use-after-free when volume creation failed [ Upstream commit 8c03a1c21d72210f81cb369cc528e3fde4b45411 ] There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s error handling path: ubi_eba_replace_table(vol, eba_tbl) vol->eba_tbl = tbl out_mapping: ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl' out_unlock: put_device(&vol->dev) vol_release kfree(tbl->entries) // UAF Fix it by removing redundant 'eba_tbl' releasing. Fetch a reproducer in [Link]. Fixes: 493cfaeaa0c9b ("mtd: utilize new cdev_device_add helper function") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215965 Signed-off-by: Zhihao Cheng Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin commit 4da8763a3d2b684c773b72ed80fad40bc264bc40 Author: Baokun Li Date: Tue Apr 12 17:38:16 2022 +0800 jffs2: fix memory leak in jffs2_do_fill_super [ Upstream commit c14adb1cf70a984ed081c67e9d27bc3caad9537c ] If jffs2_iget() or d_make_root() in jffs2_do_fill_super() returns an error, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff888105a65340 (size 64): comm "mount", pid 710, jiffies 4302851558 (age 58.239s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmem_cache_alloc_trace+0x475/0x8a0 [] jffs2_sum_init+0x96/0x1a0 [] jffs2_do_mount_fs+0x745/0x2120 [] jffs2_do_fill_super+0x35c/0x810 [] jffs2_fill_super+0x2b9/0x3b0 [...] unreferenced object 0xffff8881bd7f0000 (size 65536): comm "mount", pid 710, jiffies 4302851558 (age 58.239s) hex dump (first 32 bytes): bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ backtrace: [] kmalloc_order+0xda/0x110 [] kmalloc_order_trace+0x21/0x130 [] __kmalloc+0x711/0x8a0 [] jffs2_sum_init+0xd9/0x1a0 [] jffs2_do_mount_fs+0x745/0x2120 [] jffs2_do_fill_super+0x35c/0x810 [] jffs2_fill_super+0x2b9/0x3b0 [...] -------------------------------------------- This is because the resources allocated in jffs2_sum_init() are not released. Call jffs2_sum_exit() to release these resources to solve the problem. Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)") Signed-off-by: Baokun Li Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin commit ffd8470494c2ae11d24bc52c9bcfbd80c5afbbbb Author: Alexander Lobakin Date: Tue May 24 17:27:18 2022 +0200 modpost: fix removing numeric suffixes [ Upstream commit b5beffa20d83c4e15306c991ffd00de0d8628338 ] With the `-z unique-symbol` linker flag or any similar mechanism, it is possible to trigger the following: ERROR: modpost: "param_set_uint.0" [vmlinux] is a static EXPORT_SYMBOL The reason is that for now the condition from remove_dot(): if (m && (s[n + m] == '.' || s[n + m] == 0)) which was designed to test if it's a dot or a '\0' after the suffix is never satisfied. This is due to that `s[n + m]` always points to the last digit of a numeric suffix, not on the symbol next to it (from a custom debug print added to modpost): param_set_uint.0, s[n + m] is '0', s[n + m + 1] is '\0' So it's off-by-one and was like that since 2014. Fix this for the sake of any potential upcoming features, but don't bother stable-backporting, as it's well hidden -- apart from that LD flag, it can be triggered only with GCC LTO which never landed upstream. Fixes: fcd38ed0ff26 ("scripts: modpost: fix compilation warning") Signed-off-by: Alexander Lobakin Reviewed-by: Petr Mladek Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin commit dc1cf8c6f9793546696fded437a5b4c84944c48b Author: Miaoqian Lin Date: Thu May 26 18:52:08 2022 +0400 net: dsa: mv88e6xxx: Fix refcount leak in mv88e6xxx_mdios_register [ Upstream commit 02ded5a173619b11728b8bf75a3fd995a2c1ff28 ] of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. mv88e6xxx_mdio_register() pass the device node to of_mdiobus_register(). We don't need the device node after it. Add missing of_node_put() to avoid refcount leak. Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") Signed-off-by: Miaoqian Lin Reviewed-by: Marek Behún Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 5ba81f82607ead85fe36f50869fc4f5661359ab8 Author: Dan Carpenter Date: Thu May 26 11:02:42 2022 +0300 net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry() [ Upstream commit e7e7104e2d5ddf3806a28695670f21bef471f1e1 ] The "fsp->location" variable comes from user via ethtool_get_rxnfc(). Check that it is valid to prevent an out of bounds read. Fixes: 7aab747e5563 ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit c73d6e3cc33c6b48e0c9f12440cdaaabfe12fcdf Author: Krzysztof Kozlowski Date: Fri Apr 22 12:41:01 2022 +0200 clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value [ Upstream commit 9c04a8ff03def4df3f81219ffbe1ec9b44ff5348 ] The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO. Fixes: 89355274e1f7 ("clocksource/drivers/oxnas-rps: Add Oxford Semiconductor RPS Dual Timer") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20220422104101.55754-1-krzysztof.kozlowski@linaro.org Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin commit ed38d04342dfbe9e5aca745c8b5eb4188a74f0ef Author: Miaoqian Lin Date: Wed May 11 11:14:19 2022 +0400 firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle [ Upstream commit 660ba678f9998aca6db74f2dd912fa5124f0fa31 ] kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add() If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix this issue by calling kobject_put(). Fixes: 948af1f0bbc8 ("firmware: Basic dmi-sysfs support") Signed-off-by: Miaoqian Lin Link: https://lore.kernel.org/r/20220511071421.9769-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 12aa6d0e0ab2a3cb7d4a74c5fae148d6f23057fd Author: Ilpo Järvinen Date: Thu May 19 11:18:06 2022 +0300 serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 [ Upstream commit 52bb1cb7118564166b04d52387bd8403632f5190 ] Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has to have parity, thus add PARENB. Incorrect CSIZE results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: c4b058560762 (serial:st-asc: Add ST ASC driver.) Cc: Srinivas Kandagatla Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220519081808.3776-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit b5bd69a8523484b0e5c9eba486536f744085b4dd Author: Ilpo Järvinen Date: Thu May 19 11:18:04 2022 +0300 serial: sh-sci: Don't allow CS5-6 [ Upstream commit 9b87162de8be26bf3156460b37deee6399fd0fcb ] Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or CS6 to CS8. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2) Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220519081808.3776-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit ce1c7c6b3f221356e3792d4f25e22b538fa322e9 Author: Ilpo Järvinen Date: Thu May 19 11:18:03 2022 +0300 serial: txx9: Don't allow CS5-6 [ Upstream commit 79ac88655dc0551e3571ad16bdabdbe65d61553e ] Only CS7 and CS8 are supported but CSIZE is not sanitized with CS5 or CS6 to CS8. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2) Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220519081808.3776-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit d204e6b9c614aedf2da40de621292bc1e23194c5 Author: Ilpo Järvinen Date: Thu May 19 11:18:01 2022 +0300 serial: digicolor-usart: Don't allow CS5-6 [ Upstream commit fd63031b8c0763addcecdefe0e0c59d49646204e ] Only CS7 and CS8 seem supported but CSIZE is not sanitized to CS8 in the default: block. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: 5930cb3511df (serial: driver for Conexant Digicolor USART) Acked-by: Baruch Siach Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220519081808.3776-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit d01b980c64b5fc81b87914f2d63cff5f35fc7134 Author: John Ogness Date: Sun May 8 12:41:47 2022 +0206 serial: meson: acquire port->lock in startup() [ Upstream commit 589f892ac8ef244e47c5a00ffd8605daa1eaef8e ] The uart_ops startup() callback is called without interrupts disabled and without port->lock locked, relatively late during the boot process (from the call path of console_on_rootfs()). If the device is a console, it was already previously registered and could be actively printing messages. Since the startup() callback is reading/writing registers used by the console write() callback (AML_UART_CONTROL), its access must be synchronized using the port->lock. Currently it is not. The startup() callback is the only function that explicitly enables interrupts. Without the synchronization, it is possible that interrupts become accidentally permanently disabled. CPU0 CPU1 meson_serial_console_write meson_uart_startup -------------------------- ------------------ spin_lock(port->lock) val = readl(AML_UART_CONTROL) uart_console_write() writel(INT_EN, AML_UART_CONTROL) writel(val, AML_UART_CONTROL) spin_unlock(port->lock) Add port->lock synchronization to meson_uart_startup() to avoid racing with meson_serial_console_write(). Also add detailed comments to meson_uart_reset() explaining why it is *not* using port->lock synchronization. Link: https://lore.kernel.org/lkml/2a82eae7-a256-f70c-fd82-4e510750906e@samsung.com Fixes: ff7693d079e5 ("ARM: meson: serial: add MesonX SoC on-chip uart driver") Reported-by: Marek Szyprowski Tested-by: Marek Szyprowski Reviewed-by: Petr Mladek Reviewed-by: Jiri Slaby Acked-by: Neil Armstrong Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20220508103547.626355-1-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 79fa3f5758d8712df0678df98161f948fc4370e5 Author: Yang Yingliang Date: Thu May 5 20:50:43 2022 +0800 rtc: mt6397: check return value after calling platform_get_resource() [ Upstream commit d3b43eb505bffb8e4cdf6800c15660c001553fe6 ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Fixes: fc2979118f3f ("rtc: mediatek: Add MT6397 RTC driver") Signed-off-by: Yang Yingliang