commit e419281295bfb1e51133b702c0d5166268e62e89 Author: Greg Kroah-Hartman Date: Thu Mar 3 15:09:05 2016 -0800 Linux 3.14.63 commit 52a2780a444e156215c0db69472934c6c2dede53 Author: Oren Givon Date: Thu Dec 17 14:17:00 2015 +0200 iwlwifi: update and fix 7265 series PCI IDs commit 006bda75d81fd27a583a3b310e9444fea2aa6ef2 upstream. Update and fix some 7265 PCI IDs entries. Signed-off-by: Oren Givon Signed-off-by: Emmanuel Grumbach Signed-off-by: Greg Kroah-Hartman commit 08b706179843ff538c51bf11a04b893f149b6247 Author: Konrad Rzeszutek Wilk Date: Thu Feb 11 16:10:26 2016 -0500 xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted. commit 4d8c8bd6f2062c9988817183a91fe2e623c8aa5e upstream. Occasionaly PV guests would crash with: pciback 0000:00:00.1: Xen PCI mapped GSI0 to IRQ16 BUG: unable to handle kernel paging request at 0000000d1a8c0be0 .. snip.. ] find_next_bit+0xb/0x10 [] cpumask_next_and+0x22/0x40 [] pci_device_probe+0xb8/0x120 [] ? driver_sysfs_add+0x77/0xa0 [] driver_probe_device+0x1a4/0x2d0 [] ? pci_match_device+0xdd/0x110 [] __device_attach_driver+0xa7/0xb0 [] ? __driver_attach+0xa0/0xa0 [] bus_for_each_drv+0x62/0x90 [] __device_attach+0xbd/0x110 [] device_attach+0xb/0x10 [] pci_bus_add_device+0x3c/0x70 [] pci_bus_add_devices+0x38/0x80 [] pcifront_scan_root+0x13e/0x1a0 [] pcifront_backend_changed+0x262/0x60b [] ? xenbus_gather+0xd6/0x160 [] ? put_object+0x2f/0x50 [] xenbus_otherend_changed+0x9d/0xa0 [] backend_changed+0xe/0x10 [] xenwatch_thread+0xc8/0x190 [] ? woken_wake_function+0x10/0x10 which was the result of two things: When we call pci_scan_root_bus we would pass in 'sd' (sysdata) pointer which was an 'pcifront_sd' structure. However in the pci_device_add it expects that the 'sd' is 'struct sysdata' and sets the dev->node to what is in sd->node (offset 4): set_dev_node(&dev->dev, pcibus_to_node(bus)); __pcibus_to_node(const struct pci_bus *bus) { const struct pci_sysdata *sd = bus->sysdata; return sd->node; } However our structure was pcifront_sd which had nothing at that offset: struct pcifront_sd { int domain; /* 0 4 */ /* XXX 4 bytes hole, try to pack */ struct pcifront_device * pdev; /* 8 8 */ } That is an hole - filled with garbage as we used kmalloc instead of kzalloc (the second problem). This patch fixes the issue by: 1) Use kzalloc to initialize to a well known state. 2) Put 'struct pci_sysdata' at the start of 'pcifront_sd'. That way access to the 'node' will access the right offset. Signed-off-by: Konrad Rzeszutek Wilk Reviewed-by: Boris Ostrovsky Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman commit 478ee5e09bbd59e219cc6d281c84e9495f006ab8 Author: Al Viro Date: Sat Feb 27 19:17:33 2016 -0500 do_last(): don't let a bogus return value from ->open() et.al. to confuse us commit c80567c82ae4814a41287618e315a60ecf513be6 upstream. ... into returning a positive to path_openat(), which would interpret that as "symlink had been encountered" and proceed to corrupt memory, etc. It can only happen due to a bug in some ->open() instance or in some LSM hook, etc., so we report any such event *and* make sure it doesn't trick us into further unpleasantness. Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman commit cda49c04f6cdccca0f2db13f740e707d592ef114 Author: Simon Guinot Date: Thu Sep 10 00:15:18 2015 +0200 kernel/resource.c: fix muxed resource handling in __request_region() commit 59ceeaaf355fa0fb16558ef7c24413c804932ada upstream. In __request_region, if a conflict with a BUSY and MUXED resource is detected, then the caller goes to sleep and waits for the resource to be released. A pointer on the conflicting resource is kept. At wake-up this pointer is used as a parent to retry to request the region. A first problem is that this pointer might well be invalid (if for example the conflicting resource have already been freed). Another problem is that the next call to __request_region() fails to detect a remaining conflict. The previously conflicting resource is passed as a parameter and __request_region() will look for a conflict among the children of this resource and not at the resource itself. It is likely to succeed anyway, even if there is still a conflict. Instead, the parent of the conflicting resource should be passed to __request_region(). As a fix, this patch doesn't update the parent resource pointer in the case we have to wait for a muxed region right after. Reported-and-tested-by: Vincent Pelletier Signed-off-by: Simon Guinot Tested-by: Vincent Donnefort Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 0fbc074e6ff1393c43245bae78bd367173be4903 Author: Stefan Hajnoczi Date: Thu Feb 18 18:55:54 2016 +0000 sunrpc/cache: fix off-by-one in qword_get() commit b7052cd7bcf3c1478796e93e3dff2b44c9e82943 upstream. The qword_get() function NUL-terminates its output buffer. If the input string is in hex format \xXXXX... and the same length as the output buffer, there is an off-by-one: int qword_get(char **bpp, char *dest, int bufsize) { ... while (len < bufsize) { ... *dest++ = (h << 4) | l; len++; } ... *dest = '\0'; return len; } This patch ensures the NUL terminator doesn't fall outside the output buffer. Signed-off-by: Stefan Hajnoczi Signed-off-by: J. Bruce Fields Signed-off-by: Greg Kroah-Hartman commit 68d3584b90b4388de64607bb1d35fce2293ce334 Author: Steven Rostedt (Red Hat) Date: Wed Feb 24 09:04:24 2016 -0500 tracing: Fix showing function event in available_events commit d045437a169f899dfb0f6f7ede24cc042543ced9 upstream. The ftrace:function event is only displayed for parsing the function tracer data. It is not used to enable function tracing, and does not include an "enable" file in its event directory. Originally, this event was kept separate from other events because it did not have a ->reg parameter. But perf added a "reg" parameter for its use which caused issues, because it made the event available to functions where it was not compatible for. Commit 9b63776fa3ca9 "tracing: Do not enable function event with enable" added a TRACE_EVENT_FL_IGNORE_ENABLE flag that prevented the function event from being enabled by normal trace events. But this commit missed keeping the function event from being displayed by the "available_events" directory, which is used to show what events can be enabled by set_event. One documented way to enable all events is to: cat available_events > set_event But because the function event is displayed in the available_events, this now causes an INVALID error: cat: write error: Invalid argument Reported-by: Chunyu Hu Fixes: 9b63776fa3ca9 "tracing: Do not enable function event with enable" Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit b8cf39c1b9d05b3ce67f494ea18f6c9f7f56443a Author: Christian Borntraeger Date: Fri Feb 19 13:11:46 2016 +0100 KVM: async_pf: do not warn on page allocation failures commit d7444794a02ff655eda87e3cc54e86b940e7736f upstream. In async_pf we try to allocate with NOWAIT to get an element quickly or fail. This code also handle failures gracefully. Lets silence potential page allocation failures under load. qemu-system-s39: page allocation failure: order:0,mode:0x2200000 [...] Call Trace: ([<00000000001146b8>] show_trace+0xf8/0x148) [<000000000011476a>] show_stack+0x62/0xe8 [<00000000004a36b8>] dump_stack+0x70/0x98 [<0000000000272c3a>] warn_alloc_failed+0xd2/0x148 [<000000000027709e>] __alloc_pages_nodemask+0x94e/0xb38 [<00000000002cd36a>] new_slab+0x382/0x400 [<00000000002cf7ac>] ___slab_alloc.constprop.30+0x2dc/0x378 [<00000000002d03d0>] kmem_cache_alloc+0x160/0x1d0 [<0000000000133db4>] kvm_setup_async_pf+0x6c/0x198 [<000000000013dee8>] kvm_arch_vcpu_ioctl_run+0xd48/0xd58 [<000000000012fcaa>] kvm_vcpu_ioctl+0x372/0x690 [<00000000002f66f6>] do_vfs_ioctl+0x3be/0x510 [<00000000002f68ec>] SyS_ioctl+0xa4/0xb8 [<0000000000781c5e>] system_call+0xd6/0x264 [<000003ffa24fa06a>] 0x3ffa24fa06a Signed-off-by: Christian Borntraeger Reviewed-by: Dominik Dingel Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit d4db460720392ee6cb687db260417c85fd8c7fc4 Author: Benjamin Coddington Date: Wed Feb 17 10:41:41 2016 -0500 NFSv4: Fix a dentry leak on alias use commit d9dfd8d741683347ee159d25f5b50c346a0df557 upstream. In the case where d_add_unique() finds an appropriate alias to use it will have already incremented the reference count. An additional dget() to swap the open context's dentry is unnecessary and will leak a reference. Signed-off-by: Benjamin Coddington Fixes: 275bb307865a3 ("NFSv4: Move dentry instantiation into the NFSv4-...") Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman commit ebbc1058f6efbd635e6c7c19cba5db1ad3acfcda Author: Christoph Hellwig Date: Mon Feb 8 21:11:50 2016 +0100 nfs: fix nfs_size_to_loff_t commit 50ab8ec74a153eb30db26529088bc57dd700b24c upstream. See http: //www.infradead.org/rpr.html X-Evolution-Source: 1451162204.2173.11@leira.trondhjem.org Content-Transfer-Encoding: 8bit Mime-Version: 1.0 We support OFFSET_MAX just fine, so don't round down below it. Also switch to using min_t to make the helper more readable. Signed-off-by: Christoph Hellwig Fixes: 433c92379d9c ("NFS: Clean up nfs_size_to_loff_t()") Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman commit 4606a229c2f2b44223faa13b192165ba545ee2a9 Author: Sebastian Andrzej Siewior Date: Mon Jan 25 10:08:00 2016 -0600 PCI/AER: Flush workqueue on device remove to avoid use-after-free commit 4ae2182b1e3407de369f8c5d799543b7db74221b upstream. A Root Port's AER structure (rpc) contains a queue of events. aer_irq() enqueues AER status information and schedules aer_isr() to dequeue and process it. When we remove a device, aer_remove() waits for the queue to be empty, then frees the rpc struct. But aer_isr() references the rpc struct after dequeueing and possibly emptying the queue, which can cause a use-after-free error as in the following scenario with two threads, aer_isr() on the left and a concurrent aer_remove() on the right: Thread A Thread B -------- -------- aer_irq(): rpc->prod_idx++ aer_remove(): wait_event(rpc->prod_idx == rpc->cons_idx) # now blocked until queue becomes empty aer_isr(): # ... rpc->cons_idx++ # unblocked because queue is now empty ... kfree(rpc) mutex_unlock(&rpc->rpc_mutex) To prevent this problem, use flush_work() to wait until the last scheduled instance of aer_isr() has completed before freeing the rpc struct in aer_remove(). I reproduced this use-after-free by flashing a device FPGA and re-enumerating the bus to find the new device. With SLUB debug, this crashes with 0x6b bytes (POISON_FREE, the use-after-free magic number) in GPR25: pcieport 0000:00:00.0: AER: Multiple Corrected error received: id=0000 Unable to handle kernel paging request for data at address 0x27ef9e3e Workqueue: events aer_isr GPR24: dd6aa000 6b6b6b6b 605f8378 605f8360 d99b12c0 604fc674 606b1704 d99b12c0 NIP [602f5328] pci_walk_bus+0xd4/0x104 [bhelgaas: changelog, stable tag] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman commit 44b75c2a479c39b42aaeb95d97ca605924aeec8a Author: Tejun Heo Date: Mon Feb 1 11:33:21 2016 -0500 libata: fix sff host state machine locking while polling commit 8eee1d3ed5b6fc8e14389567c9a6f53f82bb7224 upstream. The bulk of ATA host state machine is implemented by ata_sff_hsm_move(). The function is called from either the interrupt handler or, if polling, a work item. Unlike from the interrupt path, the polling path calls the function without holding the host lock and ata_sff_hsm_move() selectively grabs the lock. This is completely broken. If an IRQ triggers while polling is in progress, the two can easily race and end up accessing the hardware and updating state machine state at the same time. This can put the state machine in an illegal state and lead to a crash like the following. kernel BUG at drivers/ata/libata-sff.c:1302! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Modules linked in: CPU: 1 PID: 10679 Comm: syz-executor Not tainted 4.5.0-rc1+ #300 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88002bd00000 ti: ffff88002e048000 task.ti: ffff88002e048000 RIP: 0010:[] [] ata_sff_hsm_move+0x619/0x1c60 ... Call Trace: [] __ata_sff_port_intr+0x1e1/0x3a0 drivers/ata/libata-sff.c:1584 [] ata_bmdma_port_intr+0x71/0x400 drivers/ata/libata-sff.c:2877 [< inline >] __ata_sff_interrupt drivers/ata/libata-sff.c:1629 [] ata_bmdma_interrupt+0x253/0x580 drivers/ata/libata-sff.c:2902 [] handle_irq_event_percpu+0x108/0x7e0 kernel/irq/handle.c:157 [] handle_irq_event+0xa7/0x140 kernel/irq/handle.c:205 [] handle_edge_irq+0x1e3/0x8d0 kernel/irq/chip.c:623 [< inline >] generic_handle_irq_desc include/linux/irqdesc.h:146 [] handle_irq+0x10c/0x2a0 arch/x86/kernel/irq_64.c:78 [] do_IRQ+0x7d/0x1a0 arch/x86/kernel/irq.c:240 [] common_interrupt+0x8c/0x8c arch/x86/entry/entry_64.S:520 [< inline >] rcu_lock_acquire include/linux/rcupdate.h:490 [< inline >] rcu_read_lock include/linux/rcupdate.h:874 [] filemap_map_pages+0x131/0xba0 mm/filemap.c:2145 [< inline >] do_fault_around mm/memory.c:2943 [< inline >] do_read_fault mm/memory.c:2962 [< inline >] do_fault mm/memory.c:3133 [< inline >] handle_pte_fault mm/memory.c:3308 [< inline >] __handle_mm_fault mm/memory.c:3418 [] handle_mm_fault+0x2516/0x49a0 mm/memory.c:3447 [] __do_page_fault+0x376/0x960 arch/x86/mm/fault.c:1238 [] trace_do_page_fault+0xe8/0x420 arch/x86/mm/fault.c:1331 [] do_async_page_fault+0x14/0xd0 arch/x86/kernel/kvm.c:264 [] async_page_fault+0x28/0x30 arch/x86/entry/entry_64.S:986 Fix it by ensuring that the polling path is holding the host lock before entering ata_sff_hsm_move() so that all hardware accesses and state updates are performed under the host lock. Signed-off-by: Tejun Heo Reported-and-tested-by: Dmitry Vyukov Link: http://lkml.kernel.org/g/CACT4Y+b_JsOxJu2EZyEf+mOXORc_zid5V1-pLZSroJVxyWdSpw@mail.gmail.com Signed-off-by: Greg Kroah-Hartman commit c48469ef81f5b939289c2f8d49291a724e7658ef Author: Tejun Heo Date: Tue Feb 9 16:11:26 2016 -0500 Revert "workqueue: make sure delayed work run in local cpu" commit 041bd12e272c53a35c54c13875839bcb98c999ce upstream. This reverts commit 874bbfe600a660cba9c776b3957b1ce393151b76. Workqueue used to implicity guarantee that work items queued without explicit CPU specified are put on the local CPU. Recent changes in timer broke the guarantee and led to vmstat breakage which was fixed by 176bed1de5bf ("vmstat: explicitly schedule per-cpu work on the CPU we need it to run on"). vmstat is the most likely to expose the issue and it's quite possible that there are other similar problems which are a lot more difficult to trigger. As a preventive measure, 874bbfe600a6 ("workqueue: make sure delayed work run in local cpu") was applied to restore the local CPU guarnatee. Unfortunately, the change exposed a bug in timer code which got fixed by 22b886dd1018 ("timers: Use proper base migration in add_timer_on()"). Due to code restructuring, the commit couldn't be backported beyond certain point and stable kernels which only had 874bbfe600a6 started crashing. The local CPU guarantee was accidental more than anything else and we want to get rid of it anyway. As, with the vmstat case fixed, 874bbfe600a6 is causing more problems than it's fixing, it has been decided to take the chance and officially break the guarantee by reverting the commit. A debug feature will be added to force foreign CPU assignment to expose cases relying on the guarantee and fixes for the individual cases will be backported to stable as necessary. Signed-off-by: Tejun Heo Fixes: 874bbfe600a6 ("workqueue: make sure delayed work run in local cpu") Link: http://lkml.kernel.org/g/20160120211926.GJ10810@quack.suse.cz Cc: Mike Galbraith Cc: Henrique de Moraes Holschuh Cc: Daniel Bilik Cc: Jan Kara Cc: Shaohua Li Cc: Sasha Levin Cc: Ben Hutchings Cc: Thomas Gleixner Cc: Daniel Bilik Cc: Jiri Slaby Cc: Michal Hocko Signed-off-by: Greg Kroah-Hartman commit 24ff5178f249a562174cfc339ac4439a436dab04 Author: Johannes Berg Date: Tue Jan 26 11:29:03 2016 +0100 rfkill: fix rfkill_fop_read wait_event usage commit 6736fde9672ff6717ac576e9bba2fd5f3dfec822 upstream. The code within wait_event_interruptible() is called with !TASK_RUNNING, so mustn't call any functions that can sleep, like mutex_lock(). Since we re-check the list_empty() in a loop after the wait, it's safe to simply use list_empty() without locking. This bug has existed forever, but was only discovered now because all userspace implementations, including the default 'rfkill' tool, use poll() or select() to get a readable fd before attempting to read. Fixes: c64fb01627e24 ("rfkill: create useful userspace interface") Reported-by: Dmitry Vyukov Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 2d9db494ab05a1cec2d3ab1daab610e023cff75a Author: Oliver Neukum Date: Mon Jan 18 15:45:18 2016 +0100 cdc-acm:exclude Samsung phone 04e8:685d commit e912e685f372ab62a2405a1acd923597f524e94a upstream. This phone needs to be handled by a specialised firmware tool and is reported to crash irrevocably if cdc-acm takes it. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman commit 739ed1f0c0d26230e686fa12a1b1601b27471723 Author: Ilya Dryomov Date: Wed Feb 17 20:04:08 2016 +0100 libceph: don't bail early from try_read() when skipping a message commit e7a88e82fe380459b864e05b372638aeacb0f52d upstream. The contract between try_read() and try_write() is that when called each processes as much data as possible. When instructed by osd_client to skip a message, try_read() is violating this contract by returning after receiving and discarding a single message instead of checking for more. try_write() then gets a chance to write out more requests, generating more replies/skips for try_read() to handle, forcing the messenger into a starvation loop. Reported-by: Varada Kari Signed-off-by: Ilya Dryomov Tested-by: Varada Kari Reviewed-by: Alex Elder Signed-off-by: Greg Kroah-Hartman commit 2b522d5f634ec22e24ca4470b54bb145324422f2 Author: Peter Rosin Date: Thu Feb 18 14:07:52 2016 +0100 hwmon: (ads1015) Handle negative conversion values correctly commit acc146943957d7418a6846f06e029b2c5e87e0d5 upstream. Make the divisor signed as DIV_ROUND_CLOSEST is undefined for negative dividends when the divisor is unsigned. Signed-off-by: Peter Rosin Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit dc49ba72c01a1f7b39b3d48f5f28fa8487461a60 Author: Mike Marciniszyn Date: Thu Jan 7 16:44:10 2016 -0500 IB/qib: fix mcast detach when qp not attached commit 09dc9cd6528f5b52bcbd3292a6312e762c85260f upstream. The code produces the following trace: [1750924.419007] general protection fault: 0000 [#3] SMP [1750924.420364] Modules linked in: nfnetlink autofs4 rpcsec_gss_krb5 nfsv4 dcdbas rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl dm_multipath nfs lockd scsi_dh sunrpc fscache radeon ttm drm_kms_helper drm serio_raw parport_pc ppdev i2c_algo_bit lpc_ich ipmi_si ib_mthca ib_qib dca lp parport ib_ipoib mac_hid ib_cm i3000_edac ib_sa ib_uverbs edac_core ib_umad ib_mad ib_core ib_addr tg3 ptp dm_mirror dm_region_hash dm_log psmouse pps_core [1750924.420364] CPU: 1 PID: 8401 Comm: python Tainted: G D 3.13.0-39-generic #66-Ubuntu [1750924.420364] Hardware name: Dell Computer Corporation PowerEdge 860/0XM089, BIOS A04 07/24/2007 [1750924.420364] task: ffff8800366a9800 ti: ffff88007af1c000 task.ti: ffff88007af1c000 [1750924.420364] RIP: 0010:[] [] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.420364] RSP: 0018:ffff88007af1dd70 EFLAGS: 00010246 [1750924.420364] RAX: 0000000000000001 RBX: ffff88007b822688 RCX: 000000000000000f [1750924.420364] RDX: ffff88007b822688 RSI: ffff8800366c15a0 RDI: 6764697200000000 [1750924.420364] RBP: ffff88007af1dd78 R08: 0000000000000001 R09: 0000000000000000 [1750924.420364] R10: 0000000000000011 R11: 0000000000000246 R12: ffff88007baa1d98 [1750924.420364] R13: ffff88003ecab000 R14: ffff88007b822660 R15: 0000000000000000 [1750924.420364] FS: 00007ffff7fd8740(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 [1750924.420364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1750924.420364] CR2: 00007ffff597c750 CR3: 000000006860b000 CR4: 00000000000007e0 [1750924.420364] Stack: [1750924.420364] ffff88007b822688 ffff88007af1ddf0 ffffffffa0132429 000000007af1de20 [1750924.420364] ffff88007baa1dc8 ffff88007baa0000 ffff88007af1de70 ffffffffa00cb313 [1750924.420364] 00007fffffffde88 0000000000000000 0000000000000008 ffff88003ecab000 [1750924.420364] Call Trace: [1750924.420364] [] qib_multicast_detach+0x1e9/0x350 [ib_qib] [1750924.568035] [] ? ib_uverbs_modify_qp+0x323/0x3d0 [ib_uverbs] [1750924.568035] [] ib_detach_mcast+0x31/0x50 [ib_core] [1750924.568035] [] ib_uverbs_detach_mcast+0x93/0x170 [ib_uverbs] [1750924.568035] [] ib_uverbs_write+0xc6/0x2c0 [ib_uverbs] [1750924.568035] [] ? apparmor_file_permission+0x18/0x20 [1750924.568035] [] ? security_file_permission+0x23/0xa0 [1750924.568035] [] vfs_write+0xb4/0x1f0 [1750924.568035] [] SyS_write+0x49/0xa0 [1750924.568035] [] system_call_fastpath+0x1a/0x1f [1750924.568035] Code: 66 2e 0f 1f 84 00 00 00 00 00 31 c0 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 10 ff 8f 40 01 00 00 74 0e 48 89 df e8 8e f8 06 e1 5b 5d c3 0f [1750924.568035] RIP [] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.568035] RSP [1750924.650439] ---[ end trace 73d5d4b3f8ad4851 ] The fix is to note the qib_mcast_qp that was found. If none is found, then return EINVAL indicating the error. Reviewed-by: Dennis Dalessandro Reported-by: Jason Gunthorpe Signed-off-by: Mike Marciniszyn Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman commit eeecc3f39587463b95ea8ddd7b7ec2c2155e0782 Author: Insu Yun Date: Sat Jan 23 15:44:19 2016 -0500 ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot() commit 2c3033a0664dfae91e1dee7fabac10f24354b958 upstream. In acpiphp_enable_slot(), there is a missing unlock path when error occurred. It needs to be unlocked before returning an error. Signed-off-by: Insu Yun Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit ee61647c34f18c204db1bc384e53c9f11c1b3819 Author: Alex Deucher Date: Fri Feb 19 18:05:10 2016 -0500 drm/radeon/pm: adjust display configuration after powerstate commit 39d4275058baf53e89203407bf3841ff2c74fa32 upstream. set_power_state defaults to no displays, so we need to update the display configuration after setting up the powerstate on the first call. In most cases this is not an issue since ends up getting called multiple times at any given modeset and the proper order is achieved in the display changed handling at the top of the function. Reviewed-by: Christian König Acked-by: Jordan Lazare Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit e4707e743e6ab24a45c2fe758f8b918122172abc Author: Rasmus Villemoes Date: Mon Feb 15 19:41:47 2016 +0100 drm/radeon: use post-decrement in error handling commit bc3f5d8c4ca01555820617eb3b6c0857e4df710d upstream. We need to use post-decrement to get the pci_map_page undone also for i==0, and to avoid some very unpleasant behaviour if pci_map_page failed already at i==0. Reviewed-by: Christian König Signed-off-by: Rasmus Villemoes Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit ccaa0f16445bbe9abe2ce6c3be8038c635229a8a Author: Gerd Hoffmann Date: Tue Feb 16 14:25:00 2016 +0100 drm/qxl: use kmalloc_array to alloc reloc_info in qxl_process_single_command commit 34855706c30d52b0a744da44348b5d1cc39fbe51 upstream. This avoids integer overflows on 32bit machines when calculating reloc_info size, as reported by Alan Cox. Cc: gnomes@lxorguk.ukuu.org.uk Signed-off-by: Gerd Hoffmann Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman commit 8bdbb55d0555794ac7bc917d5aec4b1516eba14f Author: Jani Nikula Date: Wed Jan 13 16:35:20 2016 +0200 drm/i915/dp: fall back to 18 bpp when sink capability is unknown commit 5efd407674068dede403551bea3b0b134c32513a upstream. Per DP spec, the source device should fall back to 18 bpp, VESA range RGB when the sink capability is unknown. Fix the color depth clamping. 18 bpp color depth should ensure full color range in automatic mode. The clamping has been HDMI specific since its introduction in commit 996a2239f93b03c5972923f04b097f65565c5bed Author: Daniel Vetter Date: Fri Apr 19 11:24:34 2013 +0200 drm/i915: Disable high-bpc on pre-1.4 EDID screens Reported-and-tested-by: Dihan Wickremasuriya Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331 Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1452695720-7076-1-git-send-email-jani.nikula@intel.com (cherry picked from commit 013dd9e038723bbd2aa67be51847384b75be8253) Signed-off-by: Greg Kroah-Hartman commit 50353e6f86eb2ac46ffe3cc0b9f9a11ddc8a9410 Author: Nicolai Hähnle Date: Fri Feb 5 14:35:53 2016 -0500 drm/radeon: hold reference to fences in radeon_sa_bo_new commit f6ff4f67cdf8455d0a4226eeeaf5af17c37d05eb upstream. An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by: Nicolai Hähnle Reviewed-by: Christian König Signed-off-by: Greg Kroah-Hartman commit dcbad9717b0626faa00c13fb51e81410e60fe543 Author: Alex Deucher Date: Thu Dec 17 12:52:17 2015 -0500 drm/radeon: clean up fujitsu quirks commit 0eb1c3d4084eeb6fb3a703f88d6ce1521f8fcdd1 upstream. Combine the two quirks. bug: https://bugzilla.kernel.org/show_bug.cgi?id=109481 Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit 6558531dd981b9ee133ee135ce1e89e7c970681d Author: Rob Clark Date: Wed Oct 15 15:00:47 2014 -0400 drm/vmwgfx: respect 'nomodeset' commit 96c5d076f0a5e2023ecdb44d8261f87641ee71e0 upstream. Signed-off-by: Rob Clark Reviewed-by: Thomas Hellstrom . Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman commit 670aaf542dc20fbba515a00aff228e3a03b670e7 Author: Dmitry V. Levin Date: Sun Dec 27 02:13:27 2015 +0300 sparc64: fix incorrect sign extension in sys_sparc64_personality commit 525fd5a94e1be0776fa652df5c687697db508c91 upstream. The value returned by sys_personality has type "long int". It is saved to a variable of type "int", which is not a problem yet because the type of task_struct->pesonality is "unsigned int". The problem is the sign extension from "int" to "long int" that happens on return from sys_sparc64_personality. For example, a userspace call personality((unsigned) -EINVAL) will result to any subsequent personality call, including absolutely harmless read-only personality(0xffffffff) call, failing with errno set to EINVAL. Signed-off-by: Dmitry V. Levin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 1dc152850f7b2c6c2ca6912c699099b1ca8f0699 Author: Borislav Petkov Date: Fri Nov 27 10:38:38 2015 +0100 EDAC: Robustify workqueues destruction commit fcd5c4dd8201595d4c598c9cca5e54760277d687 upstream. EDAC workqueue destruction is really fragile. We cancel delayed work but if it is still running and requeues itself, we still go ahead and destroy the workqueue and the queued work explodes when workqueue core attempts to run it. Make the destruction more robust by switching op_state to offline so that requeuing stops. Cancel any pending work *synchronously* too. EDAC i7core: Driver loaded. general protection fault: 0000 [#1] SMP CPU 12 Modules linked in: Supported: Yes Pid: 0, comm: kworker/0:1 Tainted: G IE 3.0.101-0-default #1 HP ProLiant DL380 G7 RIP: 0010:[] [] __queue_work+0x17/0x3f0 < ... regs ...> Process kworker/0:1 (pid: 0, threadinfo ffff88019def6000, task ffff88019def4600) Stack: ... Call Trace: call_timer_fn run_timer_softirq __do_softirq call_softirq do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt intel_idle cpuidle_idle_call cpu_idle Code: ... RIP __queue_work RSP <...> Signed-off-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman commit 0832c136e4e337866381e57b508d44cea34077b8 Author: zengtao Date: Tue Feb 2 11:38:34 2016 +0800 cputime: Prevent 32bit overflow in time[val|spec]_to_cputime() commit 0f26922fe5dc5724b1adbbd54b21bad03590b4f3 upstream. The datatype __kernel_time_t is u32 on 32bit platform, so its subject to overflows in the timeval/timespec to cputime conversion. Currently the following functions are affected: 1. setitimer() 2. timer_create/timer_settime() 3. sys_clock_nanosleep This can happen on MIPS32 and ARM32 with "Full dynticks CPU time accounting" enabled, which is required for CONFIG_NO_HZ_FULL. Enforce u64 conversion to prevent the overflow. Fixes: 31c1fc818715 ("ARM: Kconfig: allow full nohz CPU accounting") Signed-off-by: zengtao Reviewed-by: Arnd Bergmann Cc: Link: http://lkml.kernel.org/r/1454384314-154784-1-git-send-email-prime.zeng@huawei.com Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman commit e62b1b5a1312d86fba7d6bbdc33847ae141ec323 Author: Linus Walleij Date: Mon Jan 4 02:21:55 2016 +0100 mmc: mmci: fix an ages old detection error commit 0bcb7efdff63564e80fe84dd36a9fbdfbf6697a4 upstream. commit 4956e10903fd ("ARM: 6244/1: mmci: add variant data and default MCICLOCK support") added variant data for ARM, U300 and Ux500 variants. The Nomadik NHK8815/8820 variant was erroneously labeled as a U300 variant, and when the proper Nomadik variant was later introduced in commit 34fd421349ff ("ARM: 7378/1: mmci: add support for the Nomadik MMCI variant") this was not fixes. Let's say this fixes the latter commit as there was no proper Nomadik support until then. Fixes: 34fd421349ff ("ARM: 7378/1: mmci: add support for the Nomadik...") Signed-off-by: Linus Walleij Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 73195d5f9f5097b8d5c130be96912e0fc11f661d Author: Adrian Hunter Date: Thu Nov 26 14:00:50 2015 +0200 mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off() commit 5c671c410c8704800f4f1673b6f572137e7e6ddd upstream. sdhci has a legacy facility to prevent runtime suspend if the bus power is on. This is needed in cases where the power to the card is dependent on the bus power. It is controlled by a pair of functions: sdhci_runtime_pm_bus_on() and sdhci_runtime_pm_bus_off(). These functions use a boolean variable 'bus_on' to ensure changes are always paired. There is an additional check for 'runtime_suspended' which is the problem. In fact, its use is ill-conceived as the only requirement for the logic is that 'on' and 'off' are paired, which is actually broken by the check, for example if the bus power is turned on during runtime resume. So remove the check. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 8dedf98a03b31c7087e22753024e282b47a8690f Author: Adrian Hunter Date: Thu Nov 26 14:00:47 2015 +0200 mmc: sdio: Fix invalid vdd in voltage switch power cycle commit d9bfbb95ed598a09cf336adb0f190ee0ff802f0d upstream. The 'ocr' parameter passed to mmc_set_signal_voltage() defines the power-on voltage used when power cycling after a failure to set the voltage. However, in the case of mmc_sdio_init_card(), the value passed has the R4_18V_PRESENT flag set which is not valid for power-on and results in an invalid vdd. Fix by passing the card's ocr value which does not have the flag. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit bd57fce6f51abecc06b025831a85c607af5b3f0d Author: Richard Cochran Date: Tue Dec 22 22:19:58 2015 +0100 posix-clock: Fix return code on the poll method's error path commit 1b9f23727abb92c5e58f139e7d180befcaa06fe0 upstream. The posix_clock_poll function is supposed to return a bit mask of POLLxxx values. However, in case the hardware has disappeared (due to hot plugging for example) this code returns -ENODEV in a futile attempt to throw an error at the file descriptor level. The kernel's file_operations interface does not accept such error codes from the poll method. Instead, this function aught to return POLLERR. The value -ENODEV does, in fact, contain the POLLERR bit (and almost all the other POLLxxx bits as well), but only by chance. This patch fixes code to return a proper bit mask. Credit goes to Markus Elfring for pointing out the suspicious signed/unsigned mismatch. Reported-by: Markus Elfring igned-off-by: Richard Cochran Cc: John Stultz Cc: Julia Lawall Link: http://lkml.kernel.org/r/1450819198-17420-1-git-send-email-richardcochran@gmail.com Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman commit 44bfff548b8bd13c3e7299b88abbee9297151b8a Author: Mikulas Patocka Date: Fri Jan 8 19:07:55 2016 -0500 dm snapshot: fix hung bios when copy error occurs commit 385277bfb57faac44e92497104ba542cdd82d5fe upstream. When there is an error copying a chunk dm-snapshot can incorrectly hold associated bios indefinitely, resulting in hung IO. The function copy_callback sets pe->error if there was error copying the chunk, and then calls complete_exception. complete_exception calls pending_complete on error, otherwise it calls commit_exception with commit_callback (and commit_callback calls complete_exception). The persistent exception store (dm-snap-persistent.c) assumes that calls to prepare_exception and commit_exception are paired. persistent_prepare_exception increases ps->pending_count and persistent_commit_exception decreases it. If there is a copy error, persistent_prepare_exception is called but persistent_commit_exception is not. This results in the variable ps->pending_count never returning to zero and that causes some pending exceptions (and their associated bios) to be held forever. Fix this by unconditionally calling commit_exception regardless of whether the copy was successful. A new "valid" parameter is added to commit_exception -- when the copy fails this parameter is set to zero so that the chunk that failed to copy (and all following chunks) is not recorded in the snapshot store. Also, remove commit_callback now that it is merely a wrapper around pending_complete. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit 771b4a00bcc64cd370d5b102e2cee316e71d4f93 Author: Mike Snitzer Date: Mon Dec 14 09:26:01 2015 -0500 dm space map metadata: remove unused variable in brb_pop() commit 512167788a6fe9481a33a3cce5f80b684631a1bb upstream. Remove the unused struct block_op pointer that was inadvertantly introduced, via cut-and-paste of previous brb_op() code, as part of commit 50dd842ad. (Cc'ing stable@ because commit 50dd842ad did) Fixes: 50dd842ad ("dm space map metadata: fix ref counting bug when bootstrapping a new space map") Reported-by: David Binderman Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit 4d0ac631239b11443de839c255d80ac9fc09fc32 Author: Mauro Carvalho Chehab Date: Wed Feb 3 17:33:48 2016 -0200 tda1004x: only update the frontend properties if locked commit e8beb02343e7582980c6705816cd957cf4f74c7a upstream. The tda1004x was updating the properties cache before locking. If the device is not locked, the data at the registers are just random values with no real meaning. This caused the driver to fail with libdvbv5, as such library calls GET_PROPERTY from time to time, in order to return the DVB stats. Tested with a saa7134 card 78: ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862 Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 518cc7158e72d32c9954c7819c3e086e53064ea0 Author: Antonio Ospite Date: Fri Oct 2 17:33:13 2015 -0300 gspca: ov534/topro: prevent a division by 0 commit dcc7fdbec53a960588f2c40232db2c6466c09917 upstream. v4l2-compliance sends a zeroed struct v4l2_streamparm in v4l2-test-formats.cpp::testParmType(), and this results in a division by 0 in some gspca subdrivers: divide error: 0000 [#1] SMP Modules linked in: gspca_ov534 gspca_main ... CPU: 0 PID: 17201 Comm: v4l2-compliance Not tainted 4.3.0-rc2-ao2 #1 Hardware name: System manufacturer System Product Name/M2N-E SLI, BIOS ASUS M2N-E SLI ACPI BIOS Revision 1301 09/16/2010 task: ffff8800818306c0 ti: ffff880095c4c000 task.ti: ffff880095c4c000 RIP: 0010:[] [] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP: 0018:ffff880095c4fce8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffff8800c9522000 RCX: ffffffffa077a140 RDX: 0000000000000000 RSI: ffff880095e0c100 RDI: ffff8800c9522000 RBP: ffff880095e0c100 R08: ffffffffa077a100 R09: 00000000000000cc R10: ffff880067ec7740 R11: 0000000000000016 R12: ffffffffa07bb400 R13: 0000000000000000 R14: ffff880081b6a800 R15: 0000000000000000 FS: 00007fda0de78740(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000014630f8 CR3: 00000000cf349000 CR4: 00000000000006f0 Stack: ffffffffa07a6431 ffff8800c9522000 ffffffffa077656e 00000000c0cc5616 ffff8800c9522000 ffffffffa07a5e20 ffff880095e0c100 0000000000000000 ffff880067ec7740 ffffffffa077a140 ffff880067ec7740 0000000000000016 Call Trace: [] ? v4l_s_parm+0x21/0x50 [videodev] [] ? vidioc_s_parm+0x4e/0x60 [gspca_main] [] ? __video_do_ioctl+0x280/0x2f0 [videodev] [] ? video_ioctl2+0x20/0x20 [videodev] [] ? video_usercopy+0x319/0x4e0 [videodev] [] ? page_add_new_anon_rmap+0x71/0xa0 [] ? mem_cgroup_commit_charge+0x52/0x90 [] ? handle_mm_fault+0xc18/0x1680 [] ? v4l2_ioctl+0xac/0xd0 [videodev] [] ? do_vfs_ioctl+0x28f/0x480 [] ? SyS_ioctl+0x74/0x80 [] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: c7 93 d9 79 a0 5b 5d e9 f1 f3 9a e0 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 31 d2 48 89 fb 48 83 ec 08 8b 46 10 76 0c 80 bf ac 0c 00 00 00 88 87 4e 0e 00 00 74 09 80 bf 4f RIP [] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP ---[ end trace 279710c2c6c72080 ]--- Following what the doc says about a zeroed timeperframe (see http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-parm.html): ... To reset manually applications can just set this field to zero. fix the issue by resetting the frame rate to a default value in case of an unusable timeperframe. The fix is done in the subdrivers instead of gspca.c because only the subdrivers have notion of a default frame rate to reset the camera to. Signed-off-by: Antonio Ospite Reviewed-by: Hans de Goede Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 334dffff77b1aa0a3556a8fe2c11ddd759a78ca7 Author: Malcolm Priestley Date: Mon Aug 31 06:13:45 2015 -0300 media: dvb-core: Don't force CAN_INVERSION_AUTO in oneshot mode commit c9d57de6103e343f2d4e04ea8d9e417e10a24da7 upstream. When in FE_TUNE_MODE_ONESHOT the frontend must report the actual capabilities so user can take appropriate action. With frontends that can't do auto inversion this is done by dvb-core automatically so CAN_INVERSION_AUTO is valid. However, when in FE_TUNE_MODE_ONESHOT this is not true. So only set FE_CAN_INVERSION_AUTO in modes other than FE_TUNE_MODE_ONESHOT Signed-off-by: Malcolm Priestley Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 50e55af824d22215630f6a5f0e3f5fd2d708c195 Author: Vegard Nossum Date: Wed Dec 16 21:59:56 2015 +0100 uml: fix hostfs mknod() commit 9f2dfda2f2f1c6181c3732c16b85c59ab2d195e0 upstream. An inverted return value check in hostfs_mknod() caused the function to return success after handling it as an error (and cleaning up). It resulted in the following segfault when trying to bind() a named unix socket: Pid: 198, comm: a.out Not tainted 4.4.0-rc4 RIP: 0033:[<0000000061077df6>] RSP: 00000000daae5d60 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 000000006092a460 RCX: 00000000dfc54208 RDX: 0000000061073ef1 RSI: 0000000000000070 RDI: 00000000e027d600 RBP: 00000000daae5de0 R08: 00000000da980ac0 R09: 0000000000000000 R10: 0000000000000003 R11: 00007fb1ae08f72a R12: 0000000000000000 R13: 000000006092a460 R14: 00000000daaa97c0 R15: 00000000daaa9a88 Kernel panic - not syncing: Kernel mode fault at addr 0x40, ip 0x61077df6 CPU: 0 PID: 198 Comm: a.out Not tainted 4.4.0-rc4 #1 Stack: e027d620 dfc54208 0000006f da981398 61bee000 0000c1ed daae5de0 0000006e e027d620 dfcd4208 00000005 6092a460 Call Trace: [<60dedc67>] SyS_bind+0xf7/0x110 [<600587be>] handle_syscall+0x7e/0x80 [<60066ad7>] userspace+0x3e7/0x4e0 [<6006321f>] ? save_registers+0x1f/0x40 [<6006c88e>] ? arch_prctl+0x1be/0x1f0 [<60054985>] fork_handler+0x85/0x90 Let's also get rid of the "cosmic ray protection" while we're at it. Fixes: e9193059b1b3 "hostfs: fix races in dentry_name() and inode_name()" Signed-off-by: Vegard Nossum Cc: Jeff Dike Cc: Al Viro Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman commit fdba8a6da249a47fa59039f64a7379927519f0af Author: Vegard Nossum Date: Fri Dec 18 21:28:53 2015 +0100 uml: flush stdout before forking commit 0754fb298f2f2719f0393491d010d46cfb25d043 upstream. I was seeing some really weird behaviour where piping UML's output somewhere would cause output to get duplicated: $ ./vmlinux | head -n 40 Checking that ptrace can change system call numbers...Core dump limits : soft - 0 hard - NONE OK Checking syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Checking advanced syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Core dump limits : soft - 0 hard - NONE This is because these tests do a fork() which duplicates the non-empty stdout buffer, then glibc flushes the duplicated buffer as each child exits. A simple workaround is to flush before forking. Signed-off-by: Vegard Nossum Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman commit ad4c943fdaba8548a177cd91ccc84ab1ca295584 Author: Stefan Haberland Date: Tue Dec 15 10:45:05 2015 +0100 s390/dasd: fix refcount for PAV reassignment commit 9d862ababb609439c5d6987f6d3ddd09e703aa0b upstream. Add refcount to the DASD device when a summary unit check worker is scheduled. This prevents that the device is set offline with worker in place. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman commit 75e016b7d251cc18214b9685cd8283ad86b121ba Author: Stefan Haberland Date: Tue Dec 15 10:16:43 2015 +0100 s390/dasd: prevent incorrect length error under z/VM after PAV changes commit 020bf042e5b397479c1174081b935d0ff15d1a64 upstream. The channel checks the specified length and the provided amount of data for CCWs and provides an incorrect length error if the size does not match. Under z/VM with simulation activated the length may get changed. Having the suppress length indication bit set is stated as good CCW coding practice and avoids errors under z/VM. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman commit 19bb7e5c2ebff45cb369c44fb83db772994be1fe Author: Ard Biesheuvel Date: Fri Jan 1 13:39:22 2016 +0100 s390: fix normalization bug in exception table sorting commit bcb7825a77f41c7dd91da6f7ac10b928156a322e upstream. The normalization pass in the sorting routine of the relative exception table serves two purposes: - it ensures that the address fields of the exception table entries are fully ordered, so that no ambiguities arise between entries with identical instruction offsets (i.e., when two instructions that are exactly 8 bytes apart each have an exception table entry associated with them) - it ensures that the offsets of both the instruction and the fixup fields of each entry are relative to their final location after sorting. Commit eb608fb366de ("s390/exceptions: switch to relative exception table entries") ported the relative exception table format from x86, but modified the sorting routine to only normalize the instruction offset field and not the fixup offset field. The result is that the fixup offset of each entry will be relative to the original location of the entry before sorting, likely leading to crashes when those entries are dereferenced. Fixes: eb608fb366de ("s390/exceptions: switch to relative exception table entries") Signed-off-by: Ard Biesheuvel Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman commit 55330b801ed55f24a64ca4be6f777ee2f3e38cd9 Author: Filipe Manana Date: Thu Dec 31 18:16:29 2015 +0000 Btrfs: fix number of transaction units required to create symlink commit 9269d12b2d57d9e3d13036bb750762d1110d425c upstream. We weren't accounting for the insertion of an inline extent item for the symlink inode nor that we need to update the parent inode item (through the call to btrfs_add_nondir()). So fix this by including two more transaction units. Signed-off-by: Filipe Manana Signed-off-by: Greg Kroah-Hartman commit e5e48c0ad397cd92f2a8ec81c3ded958ceb357a1 Author: Filipe Manana Date: Thu Dec 31 18:07:59 2015 +0000 Btrfs: send, don't BUG_ON() when an empty symlink is found commit a879719b8c90e15c9e7fa7266d5e3c0ca962f9df upstream. When a symlink is successfully created it always has an inline extent containing the source path. However if an error happens when creating the symlink, we can leave in the subvolume's tree a symlink inode without any such inline extent item - this happens if after btrfs_symlink() calls btrfs_end_transaction() and before it calls the inode eviction handler (through the final iput() call), the transaction gets committed and a crash happens before the eviction handler gets called, or if a snapshot of the subvolume is made before the eviction handler gets called. Sadly we can't just avoid this by making btrfs_symlink() call btrfs_end_transaction() after it calls the eviction handler, because the later can commit the current transaction before it removes any items from the subvolume tree (if it encounters ENOSPC errors while reserving space for removing all the items). So make send fail more gracefully, with an -EIO error, and print a message to dmesg/syslog informing that there's an empty symlink inode, so that the user can delete the empty symlink or do something else about it. Reported-by: Stephen R. van den Berg Signed-off-by: Filipe Manana Signed-off-by: Greg Kroah-Hartman commit d985de97bf3d0aef79d5ac619733cb4627af0368 Author: Josef Bacik Date: Thu Oct 22 15:05:09 2015 -0400 Btrfs: igrab inode in writepage commit be7bd730841e69fe8f70120098596f648cd1f3ff upstream. We hit this panic on a few of our boxes this week where we have an ordered_extent with an NULL inode. We do an igrab() of the inode in writepages, but weren't doing it in writepage which can be called directly from the VM on dirty pages. If the inode has been unlinked then we could have I_FREEING set which means igrab() would return NULL and we get this panic. Fix this by trying to igrab in btrfs_writepage, and if it returns NULL then just redirty the page and return AOP_WRITEPAGE_ACTIVATE; so the VM knows it wasn't successful. Thanks, Signed-off-by: Josef Bacik Reviewed-by: Liu Bo Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 7354b179aff3dccac22c6e9110a26b5885606a12 Author: Anand Jain Date: Wed Oct 7 17:23:23 2015 +0800 Btrfs: add missing brelse when superblock checksum fails commit b2acdddfad13c38a1e8b927d83c3cf321f63601a upstream. Looks like oversight, call brelse() when checksum fails. Further down the code, in the non error path, we do call brelse() and so we don't see brelse() in the goto error paths. Signed-off-by: Anand Jain Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit b11202ea8547258205ef1ea15c61c7dd50d65989 Author: Russell King Date: Fri Dec 11 12:09:03 2015 +0000 scripts: recordmcount: break hardlinks commit dd39a26538e37f6c6131e829a4a510787e43c783 upstream. recordmcount edits the file in-place, which can cause problems when using ccache in hardlink mode. Arrange for recordmcount to break a hardlinked object. Link: http://lkml.kernel.org/r/E1a7MVT-0000et-62@rmk-PC.arm.linux.org.uk Signed-off-by: Russell King Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit c1a968eced547b68eb6a584b4808fb5990c7eaa7 Author: Prarit Bhargava Date: Wed Dec 9 08:31:12 2015 -0500 powercap / RAPL: fix BIOS lock check commit 79a21dbfae3cd40d5a801778071a9967b79c2c20 upstream. Intel RAPL initialized on several systems where the BIOS lock bit (msr 0x610, bit 63) was set. This occured because the return value of rapl_read_data_raw() was being checked, rather than the value of the variable passed in, locked. This patch properly implments the rapl_read_data_raw() call to check the variable locked, and now the Intel RAPL driver outputs the warning: intel_rapl: RAPL package 0 domain package locked by BIOS and does not initialize for the package. Signed-off-by: Prarit Bhargava Acked-by: Jacob Pan Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 59caef576e710b7fd43adca93113477511a6e944 Author: James Bottomley Date: Fri Dec 11 09:16:38 2015 -0800 ses: fix additional element traversal bug commit 5e1033561da1152c57b97ee84371dba2b3d64c25 upstream. KASAN found that our additional element processing scripts drop off the end of the VPD page into unallocated space. The reason is that not every element has additional information but our traversal routines think they do, leading to them expecting far more additional information than is present. Fix this by adding a gate to the traversal routine so that it only processes elements that are expected to have additional information (list is in SES-2 section 6.1.13.1: Additional Element Status diagnostic page overview) Reported-by: Pavel Tikhomirov Tested-by: Pavel Tikhomirov Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman commit 55ee25f6bfdc18393d4ea5d3bcc56bc57e56a8a7 Author: James Bottomley Date: Tue Dec 8 09:00:31 2015 -0800 ses: Fix problems with simple enclosures commit 3417c1b5cb1fdc10261dbed42b05cc93166a78fd upstream. Simple enclosure implementations (mostly USB) are allowed to return only page 8 to every diagnostic query. That really confuses our implementation because we assume the return is the page we asked for and end up doing incorrect offsets based on bogus information leading to accesses outside of allocated ranges. Fix that by checking the page code of the return and giving an error if it isn't the one we asked for. This should fix reported bugs with USB storage by simply refusing to attach to enclosures that behave like this. It's also good defensive practise now that we're starting to see more USB enclosures. Reported-by: Andrea Gelmini Reviewed-by: Ewan D. Milne Reviewed-by: Tomas Henzl Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman commit b25bfd9272838d020da06df12bd0d21c0302a9f9 Author: Johannes Berg Date: Thu Dec 10 10:37:51 2015 +0100 rfkill: copy the name into the rfkill struct commit b7bb110008607a915298bf0f47d25886ecb94477 upstream. Some users of rfkill, like NFC and cfg80211, use a dynamic name when allocating rfkill, in those cases dev_name(). Therefore, the pointer passed to rfkill_alloc() might not be valid forever, I specifically found the case that the rfkill name was quite obviously an invalid pointer (or at least garbage) when the wiphy had been renamed. Fix this by making a copy of the rfkill name in rfkill_alloc(). Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 0c35217d74c8b32099a80aaeda1f60e992484143 Author: Kirill A. Shutemov Date: Mon Nov 30 04:17:31 2015 +0200 vgaarb: fix signal handling in vga_get() commit 9f5bd30818c42c6c36a51f93b4df75a2ea2bd85e upstream. There are few defects in vga_get() related to signal hadning: - we shouldn't check for pending signals for TASK_UNINTERRUPTIBLE case; - if we found pending signal we must remove ourself from wait queue and change task state back to running; - -ERESTARTSYS is more appropriate, I guess. Signed-off-by: Kirill A. Shutemov Reviewed-by: David Herrmann Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman commit 681edbd0b1b1d02833b8310a45b22dae9c7d32fd Author: Guillaume Delbergue Date: Tue Dec 1 18:55:51 2015 +0100 irqchip/versatile-fpga: Fix PCI IRQ mapping on Versatile PB commit d5d4fdd86f5759924fe54efa793e22eccf508db6 upstream. This patch is specifically for PCI support on the Versatile PB board using a DT. Currently, the dynamic IRQ mapping is broken when using DTs. For example, on QEMU, the SCSI driver is unable to request the IRQ. To fix this issue, this patch replaces the current dynamic mechanism with a static value as is done in the non-DT case. Signed-off-by: Guillaume Delbergue Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman commit 255822b235149c26054d7fb4ba63d0b2dd776ea0 Author: Joe Thornber Date: Thu Dec 10 14:37:53 2015 +0000 dm btree: fix bufio buffer leaks in dm_btree_del() error path commit ed8b45a3679eb49069b094c0711b30833f27c734 upstream. If dm_btree_del()'s call to push_frame() fails, e.g. due to btree_node_validator finding invalid metadata, the dm_btree_del() error path must unlock all frames (which have active dm-bufio buffers) that were pushed onto the del_stack. Otherwise, dm_bufio_client_destroy() will BUG_ON() because dm-bufio buffers have leaked, e.g.: device-mapper: bufio: leaked buffer 3, hold count 1, list 0 Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit a58ccbd069ee6a53b78bad5894fa493f124ab944 Author: Joe Thornber Date: Wed Dec 9 16:38:12 2015 +0000 dm space map metadata: fix ref counting bug when bootstrapping a new space map commit 50dd842ad83b43bed71790efb31cfb2f6c05c9c1 upstream. When applying block operations (BOPs) do not remove them from the uncommitted BOP ring-buffer until after they've been applied -- in case we recurse. Also, perform BOP_INC operation, in dm_sm_metadata_create() and sm_metadata_extend(), in terms of the uncommitted BOP ring-buffer rather than using direct calls to sm_ll_inc(). Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit 9a9a7b4e292fd37f896748affa1ab69015e64dad Author: Mikulas Patocka Date: Thu Nov 26 12:00:59 2015 -0500 sata_sil: disable trim commit d98f1cd0a3b70ea91f1dfda3ac36c3b2e1a4d5e2 upstream. When I connect an Intel SSD to SATA SIL controller (PCI ID 1095:3114), any TRIM command results in I/O errors being reported in the log. There is other similar error reported with TRIM and the SIL controller: https://bugs.centos.org/view.php?id=5880 Apparently the controller doesn't support TRIM commands. This patch disables TRIM support on the SATA SIL controller. ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata7.00: BMDMA2 stat 0x50001 ata7.00: failed command: DATA SET MANAGEMENT ata7.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) ata7.00: status: { DRDY ERR } ata7.00: error: { ABRT } ata7.00: device reported invalid CHS sector 0 sd 8:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 8:0:0:0: [sdb] tag#0 Sense Key : Illegal Request [current] [descriptor] sd 8:0:0:0: [sdb] tag#0 Add. Sense: Unaligned write command sd 8:0:0:0: [sdb] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 21 95 88 00 20 00 00 00 00 blk_update_request: I/O error, dev sdb, sector 2200968 Signed-off-by: Mikulas Patocka Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit df7a5f94f075e5ee962d7009ce2c9c15f207e63f Author: Sasha Levin Date: Mon Nov 30 20:34:20 2015 -0500 sched/core: Remove false-positive warning from wake_up_process() commit 119d6f6a3be8b424b200dcee56e74484d5445f7e upstream. Because wakeups can (fundamentally) be late, a task might not be in the expected state. Therefore testing against a task's state is racy, and can yield false positives. Signed-off-by: Sasha Levin Signed-off-by: Peter Zijlstra (Intel) Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: oleg@redhat.com Fixes: 9067ac85d533 ("wake_up_process() should be never used to wakeup a TASK_STOPPED/TRACED task") Link: http://lkml.kernel.org/r/1448933660-23082-1-git-send-email-sasha.levin@oracle.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 88bec78f852374545641a5a23049dc6ead58d570 Author: Xunlei Pang Date: Wed Dec 2 19:52:59 2015 +0800 sched/core: Clear the root_domain cpumasks in init_rootdomain() commit 8295c69925ad53ec32ca54ac9fc194ff21bc40e2 upstream. root_domain::rto_mask allocated through alloc_cpumask_var() contains garbage data, this may cause problems. For instance, When doing pull_rt_task(), it may do useless iterations if rto_mask retains some extra garbage bits. Worse still, this violates the isolated domain rule for clustered scheduling using cpuset, because the tasks(with all the cpus allowed) belongs to one root domain can be pulled away into another root domain. The patch cleans the garbage by using zalloc_cpumask_var() instead of alloc_cpumask_var() for root_domain::rto_mask allocation, thereby addressing the issues. Do the same thing for root_domain's other cpumask memembers: dlo_mask, span, and online. Signed-off-by: Xunlei Pang Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1449057179-29321-1-git-send-email-xlpang@redhat.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit c4e04f090eac8430e3b42212b5d6f16806ee9787 Author: Mirza Krak Date: Tue Nov 10 14:59:34 2015 +0100 can: sja1000: clear interrupts on start commit 7cecd9ab80f43972c056dc068338f7bcc407b71c upstream. According to SJA1000 data sheet error-warning (EI) interrupt is not cleared by setting the controller in to reset-mode. Then if we have the following case: - system is suspended (echo mem > /sys/power/state) and SJA1000 is left in operating state - A bus error condition occurs which activates EI interrupt, system is still suspended which means EI interrupt will be not be handled nor cleared. If the above two events occur, on resume there is no way to return the SJA1000 to operating state, except to cycle power to it. By simply reading the IR register on start we will clear any previous conditions that could be present. Signed-off-by: Mirza Krak Reported-by: Christian Magnusson Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit ef8d4d93d242c0153d00ab782a18befdbef35dcc Author: Quentin Casasnovas Date: Tue Nov 24 17:13:21 2015 -0500 RDS: fix race condition when sending a message on unbound socket commit 8c7188b23474cca017b3ef354c4a58456f68303a upstream. Sasha's found a NULL pointer dereference in the RDS connection code when sending a message to an apparently unbound socket. The problem is caused by the code checking if the socket is bound in rds_sendmsg(), which checks the rs_bound_addr field without taking a lock on the socket. This opens a race where rs_bound_addr is temporarily set but where the transport is not in rds_bind(), leading to a NULL pointer dereference when trying to dereference 'trans' in __rds_conn_create(). Vegard wrote a reproducer for this issue, so kindly ask him to share if you're interested. I cannot reproduce the NULL pointer dereference using Vegard's reproducer with this patch, whereas I could without. Complete earlier incomplete fix to CVE-2015-6937: 74e98eb08588 ("RDS: verify the underlying transport exists before creating a connection") Reviewed-by: Vegard Nossum Reviewed-by: Sasha Levin Acked-by: Santosh Shilimkar Signed-off-by: Quentin Casasnovas Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 1e65a06366da51b0b5c5b2c77804be1529406842 Author: Johannes Berg Date: Tue Nov 17 14:25:21 2015 +0100 mac80211: mesh: fix call_rcu() usage commit c2e703a55245bfff3db53b1f7cbe59f1ee8a4339 upstream. When using call_rcu(), the called function may be delayed quite significantly, and without a matching rcu_barrier() there's no way to be sure it has finished. Therefore, global state that could be gone/freed/reused should never be touched in the callback. Fix this in mesh by moving the atomic_dec() into the caller; that's not really a problem since we already unlinked the path and it will be destroyed anyway. This fixes a crash Jouni observed when running certain tests in a certain order, in which the mesh interface was torn down, the memory reused for a function pointer (work struct) and running that then crashed since the pointer had been decremented by 1, resulting in an invalid instruction byte stream. Fixes: eb2b9311fd00 ("mac80211: mesh path table implementation") Reported-by: Jouni Malinen Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 6c08efea2e18f6ea6931d619e27fbe900e3af9ad Author: Suman Anna Date: Wed Sep 16 19:29:17 2015 -0500 virtio: fix memory leak of virtio ida cache layers commit c13f99b7e945dad5273a8b7ee230f4d1f22d3354 upstream. The virtio core uses a static ida named virtio_index_ida for assigning index numbers to virtio devices during registration. The ida core may allocate some internal idr cache layers and an ida bitmap upon any ida allocation, and all these layers are truely freed only upon the ida destruction. The virtio_index_ida is not destroyed at present, leading to a memory leak when using the virtio core as a module and atleast one virtio device is registered and unregistered. Fix this by invoking ida_destroy() in the virtio core module exit. Signed-off-by: Suman Anna Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman commit 6fa733e9dba350f1c4de4ff3cde8ee0afc9243e5 Author: Steven Rostedt (Red Hat) Date: Mon Nov 23 10:35:36 2015 -0500 ring-buffer: Update read stamp with first real commit on page commit b81f472a208d3e2b4392faa6d17037a89442f4ce upstream. Do not update the read stamp after swapping out the reader page from the write buffer. If the reader page is swapped out of the buffer before an event is written to it, then the read_stamp may get an out of date timestamp, as the page timestamp is updated on the first commit to that page. rb_get_reader_page() only returns a page if it has an event on it, otherwise it will return NULL. At that point, check if the page being returned has events and has not been read yet. Then at that point update the read_stamp to match the time stamp of the reader page. Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit c190c2adcc896df5be428c77506d95ca28228e7a Author: Jan Engelhardt Date: Mon Nov 23 17:46:32 2015 +0100 target: fix COMPARE_AND_WRITE non zero SGL offset data corruption commit d94e5a61357a04938ce14d6033b4d33a3c5fd780 upstream. target_core_sbc's compare_and_write functionality suffers from taking data at the wrong memory location when writing a CAW request to disk when a SGL offset is non-zero. This can happen with loopback and vhost-scsi fabric drivers when SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is used to map existing user-space SGL memory into COMPARE_AND_WRITE READ/WRITE payload buffers. Given the following sample LIO subtopology, % targetcli ls /loopback/ o- loopback ................................. [1 Target] o- naa.6001405ebb8df14a ....... [naa.60014059143ed2b3] o- luns ................................... [2 LUNs] o- lun0 ................ [iblock/ram0 (/dev/ram0)] o- lun1 ................ [iblock/ram1 (/dev/ram1)] % lsscsi -g [3:0:1:0] disk LIO-ORG IBLOCK 4.0 /dev/sdc /dev/sg3 [3:0:1:1] disk LIO-ORG IBLOCK 4.0 /dev/sdd /dev/sg4 the following bug can be observed in Linux 4.3 and 4.4~rc1: % perl -e 'print chr$_ for 0..255,reverse 0..255' >rand % perl -e 'print "\0" x 512' >zero % cat rand >/dev/sdd % sg_compare_and_write -i rand -D zero --lba 0 /dev/sdd % sg_compare_and_write -i zero -D rand --lba 0 /dev/sdd Miscompare reported % hexdump -Cn 512 /dev/sdd 00000000 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00000200 Rather than writing all-zeroes as instructed with the -D file, it corrupts the data in the sector by splicing some of the original bytes in. The page of the first entry of cmd->t_data_sg includes the CDB, and sg->offset is set to a position past the CDB. I presume that sg->offset is also the right choice to use for subsequent sglist members. Signed-off-by: Jan Engelhardt Tested-by: Douglas Gilbert Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman commit 99853deb97618d86d663b9e22ed9968f7461957b Author: Nicholas Bellinger Date: Thu Nov 5 23:37:59 2015 -0800 target: Fix race for SCF_COMPARE_AND_WRITE_POST checking commit 057085e522f8bf94c2e691a5b76880f68060f8ba upstream. This patch addresses a race + use after free where the first stage of COMPARE_AND_WRITE in compare_and_write_callback() is rescheduled after the backend sends the secondary WRITE, resulting in second stage compare_and_write_post() callback completing in target_complete_ok_work() before the first can return. Because current code depends on checking se_cmd->se_cmd_flags after return from se_cmd->transport_complete_callback(), this results in first stage having SCF_COMPARE_AND_WRITE_POST set, which incorrectly falls through into second stage CAW processing code, eventually triggering a NULL pointer dereference due to use after free. To address this bug, pass in a new *post_ret parameter into se_cmd->transport_complete_callback(), and depend upon this value instead of ->se_cmd_flags to determine when to return or fall through into ->queue_status() code for CAW. Cc: Sagi Grimberg Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman commit d2ac4bf5d05b52a428ee7f8cdadd09fc96d66537 Author: Jan Kara Date: Mon Nov 23 13:09:51 2015 +0100 vfs: Avoid softlockups with sendfile(2) commit c2489e07c0a71a56fb2c84bc0ee66cddfca7d068 upstream. The following test program from Dmitry can cause softlockups or RCU stalls as it copies 1GB from tmpfs into eventfd and we don't have any scheduling point at that path in sendfile(2) implementation: int r1 = eventfd(0, 0); int r2 = memfd_create("", 0); unsigned long n = 1<<30; fallocate(r2, 0, 0, n); sendfile(r1, r2, 0, n); Add cond_resched() into __splice_from_pipe() to fix the problem. CC: Dmitry Vyukov Signed-off-by: Jan Kara Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman commit 31ab5afaaf6ddb7590f0ccc5974e7303dc62f11e Author: Vineet Gupta Date: Mon Nov 23 19:32:51 2015 +0530 ARC: dw2 unwind: Remove falllback linear search thru FDE entries commit 2e22502c080f27afeab5e6f11e618fb7bc7aea53 upstream. Fixes STAR 9000953410: "perf callgraph profiling causing RCU stalls" | perf record -g -c 15000 -e cycles /sbin/hackbench | | INFO: rcu_preempt self-detected stall on CPU | 1: (1 GPs behind) idle=609/140000000000002/0 softirq=2914/2915 fqs=603 | Task dump for CPU 1: in-kernel dwarf unwinder has a fast binary lookup and a fallback linear search (which iterates thru each of ~11K entries) thus takes 2 orders of magnitude longer (~3 million cycles vs. 2000). Routines written in hand assembler lack dwarf info (as we don't support assembler CFI pseudo-ops yet) fail the unwinder binary lookup, hit linear search, failing nevertheless in the end. However the linear search is pointless as binary lookup tables are created from it in first place. It is impossible to have binary lookup fail while succeed the linear search. It is pure waste of cycles thus removed by this patch. This manifested as RCU stalls / NMI watchdog splat when running hackbench under perf with callgraph profiling. The triggering condition was perf counter overflowing in routine lacking dwarf info (like memset) leading to patheic 3 million cycle unwinder slow path and by the time it returned new interrupts were already pending (Timer, IPI) and taken rightaway. The original memset didn't make forward progress, system kept accruing more interrupts and more unwinder delayes in a vicious feedback loop, ultimately triggering the NMI diagnostic. Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman commit 7f4f03c4a1e9a4b9679feafe7625a780864a4e76 Author: Kees Cook Date: Thu Nov 19 17:18:54 2015 -0800 mac: validate mac_partition is within sector commit 02e2a5bfebe99edcf9d694575a75032d53fe1b73 upstream. If md->signature == MAC_DRIVER_MAGIC and md->block_size == 1023, a single 512 byte sector would be read (secsize / 512). However the partition structure would be located past the end of the buffer (secsize % 512). Signed-off-by: Kees Cook Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 6eca392d950c5737d02005252b519981d91412fb Author: Luca Porzio Date: Fri Nov 6 15:12:26 2015 +0000 mmc: remove bondage between REQ_META and reliable write commit d3df0465db00cf4ed9f90d0bfc3b827d32b9c796 upstream. Anytime a write operation is performed with Reliable Write flag enabled, the eMMC device is enforced to bypass the cache and do a write to the underling NVM device by Jedec specification; this causes a performance penalty since write operations can't be optimized by the device cache. In our tests, we replayed a typical mobile daily trace pattern and found ~9% overall time reduction in trace replay by using this patch. Also the write ops within 4KB~64KB chunk size range get a 40~60% performance improvement by using the patch (as this range of write chunks are the ones affected by REQ_META). This patch has been discussed in the Mobile & Embedded Linux Storage Forum and it's the results of feedbacks from many people. We also checked with fsdevl and f2fs mailing list developers that this change in the usage of REQ_META is not affecting FS behavior and we got positive feedbacks. Reporting here the feedbacks: http://comments.gmane.org/gmane.linux.file-systems/97219 http://thread.gmane.org/gmane.linux.file-systems.f2fs/3178/focus=3183 Signed-off-by: Bruce Ford Signed-off-by: Luca Porzio Fixes: ce39f9d17c14 ("mmc: support packed write command for eMMC4.5 devices") Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman