commit 02709ef60b70874443d375a91ea98f2e12aba0d7 Author: Greg Kroah-Hartman Date: Wed Nov 13 12:08:24 2013 +0900 Linux 3.11.8 commit 51dcd49f16772e41318fee7ad5b477661f0c84df Author: Jon Mason Date: Tue Jul 30 15:58:49 2013 -0700 NTB: Correct debugfs to work with more than 1 NTB Device commit 1517a3f21a1dd321f16bcf44204bddff9d21abd0 upstream. Debugfs was setup in NTB to only have a single debugfs directory. This resulted in the leaking of debugfs directories and files when multiple NTB devices were present, due to each device stomping on the variables containing the previous device's values (thus preventing them from being freed on cleanup). Correct this by creating a secondary directory of the PCI BDF for each device present, and nesting the previously existing information in those directories. Signed-off-by: Jon Mason Signed-off-by: Greg Kroah-Hartman commit 5da1ca75f78746e35357679c184d2107d880e9ec Author: Jon Mason Date: Fri May 31 14:05:53 2013 -0700 NTB: Correct USD/DSD Identification commit b6750cfe0710a14fd147ba27fddbecae8ba88c77 upstream. Due to ambiguous documentation, the USD/DSD identification is backward when compared to the setting in BIOS. Correct the bits to match the BIOS setting. Signed-off-by: Jon Mason Signed-off-by: Greg Kroah-Hartman commit ec56e56b6d4ed6edb38358edd26f5b9fb87eb3f5 Author: Jon Mason Date: Mon Jul 15 15:26:14 2013 -0700 NTB: Correct Number of Scratch Pad Registers commit 87034511519815259e37336f52edf06d114d43b6 upstream. The NTB Xeon hardware has 16 scratch pad registers and 16 back-to-back scratch pad registers. Correct the #define to represent this and update the variable names to reflect their usage. Signed-off-by: Jon Mason Signed-off-by: Greg Kroah-Hartman commit 7803b56d3b0d29a0231af3164dc7d3d9e86ded90 Author: Jon Mason Date: Mon Jul 15 13:23:47 2013 -0700 NTB: Add Error Handling in ntb_device_setup commit 3b12a0d15bd1559e72ad21d9d807fd2a6706f0ab upstream. If an error is encountered in ntb_device_setup, it is possible that the spci_cmd isn't populated. Writes to the offset can result in a NULL pointer dereference. This issue is easily encountered by running in NTB-RP mode, as it currently is not supported and will generate an error. To get around this issue, return if an error is encountered prior to attempting to write to the spci_cmd offset. Signed-off-by: Jon Mason Signed-off-by: Greg Kroah-Hartman commit 24460c53b7f00ab1ba55e07377a0351175cf395a Author: Gu Zheng Date: Fri Oct 25 18:15:06 2013 +0800 seq_file: always update file->f_pos in seq_lseek() commit 05e16745c0c471bba313961b605b6da3b21a853d upstream. This issue was first pointed out by Jiaxing Wang several months ago, but no further comments: https://lkml.org/lkml/2013/6/29/41 As we know pread() does not change f_pos, so after pread(), file->f_pos and m->read_pos become different. And seq_lseek() does not update file->f_pos if offset equals to m->read_pos, so after pread() and seq_lseek()(lseek to m->read_pos), then a subsequent read may read from a wrong position, the following program produces the problem: char str1[32] = { 0 }; char str2[32] = { 0 }; int poffset = 10; int count = 20; /*open any seq file*/ int fd = open("/proc/modules", O_RDONLY); pread(fd, str1, count, poffset); printf("pread:%s\n", str1); /*seek to where m->read_pos is*/ lseek(fd, poffset+count, SEEK_SET); /*supposed to read from poffset+count, but this read from position 0*/ read(fd, str2, count); printf("read:%s\n", str2); out put: pread: ck_netbios_ns 12665 read: nf_conntrack_netbios /proc/modules: nf_conntrack_netbios_ns 12665 0 - Live 0xffffffffa038b000 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns, Live 0xffffffffa0386000 So we always update file->f_pos to offset in seq_lseek() to fix this issue. Signed-off-by: Jiaxing Wang Signed-off-by: Gu Zheng Signed-off-by: Al Viro Cc: Jonghwan Choi Signed-off-by: Greg Kroah-Hartman commit 97f61e059bf498022b88fd800ed629018bacfcc2 Author: Tetsuo Handa Date: Thu Oct 17 19:45:29 2013 +0900 mutex: Avoid gcc version dependent __builtin_constant_p() usage commit b0267507dfd0187fb7840a0ec461a510a7f041c5 upstream. Commit 040a0a37 ("mutex: Add support for wound/wait style locks") used "!__builtin_constant_p(p == NULL)" but gcc 3.x cannot handle such expression correctly, leading to boot failure when built with CONFIG_DEBUG_MUTEXES=y. Fix it by explicitly passing a bool which tells whether p != NULL or not. [ PeterZ: This is a sad patch, but provided it actually generates similar code I suppose its the best we can do bar whole sale deprecating gcc-3. ] Signed-off-by: Tetsuo Handa Acked-by: Peter Zijlstra Acked-by: Maarten Lankhorst Cc: peterz@infradead.org Cc: imirkin@alum.mit.edu Cc: daniel.vetter@ffwll.ch Cc: robdclark@gmail.com Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/201310171945.AGB17114.FSQVtHOJFOOFML@I-love.SAKURA.ne.jp Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 51528f7f9d6795fa67accdc5543a51949c416a42 Author: Daniel Vetter Date: Tue Oct 29 12:04:08 2013 +0100 drm/i915: Fix the PPT fdi lane bifurcate state handling on ivb commit 1fbc0d789d12fec313c91912fc11733fdfbab863 upstream. Originally I've thought that this is leftover hw state dirt from the BIOS. But after way too much helpless flailing around on my part I've noticed that the actual bug is when we change the state of an already active pipe. For example when we change the fdi lines from 2 to 3 without switching off outputs in-between we'll never see the crucial on->off transition in the ->modeset_global_resources hook the current logic relies on. Patch version 2 got this right by instead also checking whether the pipe is indeed active. But that in turn broke things when pipes have been turned off through dpms since the bifurcate enabling is done in the ->crtc_mode_set callback. To address this issues discussed with Ville in the patch review move the setting of the bifurcate bit into the ->crtc_enable hook. That way we won't wreak havoc with this state when userspace puts all other outputs into dpms off state. This also moves us forward with our overall goal to unify the modeset and dpms on paths (which we need to have to allow runtime pm in the dpms off state). Unfortunately this requires us to move the bifurcate helpers around a bit. Also update the commit message, I've misanalyzed the bug rather badly. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70507 Tested-by: Jan-Michael Brummer Cc: Ville Syrjälä Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter Signed-off-by: Greg Kroah-Hartman commit d727a6888ac39dee06bbefcda50596a7c85105aa Author: Rob Pearce Date: Sun Oct 27 16:13:42 2013 +0000 drm/i915: No LVDS hardware on Intel D410PT and D425KT commit 645378d85ee524e429aa4cf52806047b56cdc596 upstream. The Intel D410PT(LW) and D425KT Mini-ITX desktop boards both show up as having LVDS but the hardware is not populated. This patch adds them to the list of such systems. Patch is against 3.11.4 v2: Patch revised to match the D425KT exactly as the D425KTW does have LVDS. According to Intel's documentation, the D410PTL and D410PLTW don't. Signed-off-by: Rob Pearce [danvet: Pimp commit message to my liking and add cc: stable.] Signed-off-by: Daniel Vetter Signed-off-by: Greg Kroah-Hartman commit 4eef610aa86d861efcb43ce4a8f741c55e806bf3 Author: Ville Syrjälä Date: Mon Oct 21 10:52:06 2013 +0300 drm/i915: Add support for pipe_bpp readout commit 4f56d12ebb28fceac4c6e60c8993fbfc122e1399 upstream. On CTG+ read out the pipe bpp setting from hardware and fill it into pipe config. Also check it appropriately. v2: Don't do the pipe_bpp extraction inside the PCH only code block on ILK+. Avoid the PIPECONF read as we already have read it for the PIPECONF_EANBLE check. Note: This is already in drm-intel-next-queued as commit 42571aefafb1d330ef84eb29418832f72e7dfb4c Author: Ville Syrjälä Date: Fri Sep 6 23:29:00 2013 +0300 drm/i915: Add support for pipe_bpp readout but is needed for the following bugfix. Signed-off-by: Ville Syrjälä Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter Signed-off-by: Greg Kroah-Hartman commit 9741538fbf9191a46b80333e003a49ea34d789d3 Author: Ville Syrjälä Date: Tue Sep 24 14:24:05 2013 +0300 drm/i915: Add HSW CRT output readout support commit 7195a50b5c7e00cc3312934fd022c3006b533d12 upstream. Call intel_ddi_get_config() to get the pipe_bpp settings from DDI. The sync polarity settings from DDI are irrelevant for CRT output, so override them with data from the ADPA register. Note: This is already merged in drm-intel-next-queued as commit 6801c18c0a43386bb44712cbc028a7e05adb9f0d Author: Ville Syrjälä Date: Tue Sep 24 14:24:05 2013 +0300 drm/i915: Add HSW CRT output readout support but is required for the following edp bpp bugfix. v2: Extract intel_crt_get_flags() Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69691 Tested-by: Qingshuai Tian Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter Signed-off-by: Greg Kroah-Hartman commit 25f1734b8fc6531dce3b8c9de5423bee71b76035 Author: Alex Deucher Date: Wed Oct 16 11:36:30 2013 -0400 drm/radeon: make missing smc ucode non-fatal (r7xx-SI) commit d83671126dc8e7c0b56c9970ea5ffd08c3b0c645 upstream. Prevent driver load problems if the smc is missing. bug: https://bugzilla.kernel.org/show_bug.cgi?id=63011 Signed-off-by: Alex Deucher Tested-by: Mikko Rapeli Signed-off-by: Greg Kroah-Hartman commit 1417cc5548ba834a8ecef56f86ae682670b12490 Author: Alex Deucher Date: Thu Oct 10 16:45:27 2013 -0400 drm/radeon/atom: workaround vbios bug in transmitter table on rs780 commit c23632d4e57c0dd20bf50eca08fa0eb8ad3ff680 upstream. Some rs780 asics seem to be affected as well. See: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=91f3a6aaf280294b07c05dfe606e6c27b7ba3c72 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60791 Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit cf0fad057e015cffbb0edd8c373fdd52db68c50e Author: Chris Wilson Date: Wed Oct 16 09:49:02 2013 +0100 drm: Pad drm_mode_get_connector to 64-bit boundary commit bc5bd37ce48c66e9192ad2e7231e9678880f6f8e upstream. Pavel Roskin reported that DRM_IOCTL_MODE_GETCONNECTOR was overwritting the 4 bytes beyond the end of its structure with a 32-bit userspace running on a 64-bit kernel. This is due to the padding gcc inserts as the drm_mode_get_connector struct includes a u64 and its size is not a natural multiple of u64s. 64-bit kernel: sizeof(drm_mode_get_connector)=80, alignof=8 sizeof(drm_mode_get_encoder)=20, alignof=4 sizeof(drm_mode_modeinfo)=68, alignof=4 32-bit userspace: sizeof(drm_mode_get_connector)=76, alignof=4 sizeof(drm_mode_get_encoder)=20, alignof=4 sizeof(drm_mode_modeinfo)=68, alignof=4 Fortuituously we can insert explicit padding to the tail of our structures without breaking ABI. Reported-by: Pavel Roskin Signed-off-by: Chris Wilson Cc: Dave Airlie Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman commit 8528076a9922966b93b7b12e104cd3fdcd8fee3f Author: Chris Wilson Date: Wed Oct 16 11:22:44 2013 +0100 drm: Prevent overwriting from userspace underallocating core ioctl structs commit b062672e305ce071f21eb9e18b102c2a430e0999 upstream. Apply the protections from commit 1b2f1489633888d4a06028315dc19d65768a1c05 Author: Dave Airlie Date: Sat Aug 14 20:20:34 2010 +1000 drm: block userspace under allocating buffer and having drivers overwrite it (v2) to the core ioctl structs as well, for we found one instance where there is a 32-/64-bit size mismatch and were guilty of writing beyond the end of the user's buffer. Signed-off-by: Chris Wilson Cc: Dave Airlie Reviewed-by: Ville Syrjälä Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman commit ef4ea0912a5dd2b67353f83acd09d651650cba8f Author: Chris Wilson Date: Sun Jul 21 16:00:03 2013 +0100 drm/i915: Retry DP aux_ch communications with a different clock after failure commit bc86625a4ff7574d4d4dba79723457711eb784e0 upstream. The w/a db makes the recommendation to both use a non-default value for the initial clock and then to retry with an alternative clock for Haswell with the Lakeport PCH. "On LPT:H, use a divider value of 63 decimal (03Fh). If there is a failure, retry at least three times with 63, then retry at least three times with 72 decimal (048h)." Signed-off-by: Chris Wilson Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter Signed-off-by: Greg Kroah-Hartman commit 141d9920e281a4597379b7f43c9c2b9fa340b22a Author: Rodrigo Vivi Date: Thu Jul 11 18:44:57 2013 -0300 drm/i915: split aux_clock_divider logic in a separated function for reuse. commit b84a1cf8950ed075c4ab2630514d4caaae504176 upstream. Prep patch for reuse aux_clock_divider with EDP_PSR_AUX_CTL setup. Reviewed-by: Paulo Zanoni Signed-off-by: Rodrigo Vivi Reviewed-by: Shobhit Kumar Signed-off-by: Daniel Vetter Signed-off-by: Greg Kroah-Hartman commit cb0bb972b5b6798a94fbe08330a7ac83284b301a Author: Thomas Hellstrom Date: Wed Oct 9 01:42:51 2013 -0700 drm/vmwgfx: Don't kill clients on VT switch commit c4249855ac5b2a383704d31e040d3831d6a25c6f upstream. DRI clients that tried to grab the TTM lock when the master (X server) was switched away during a VT switch were sent the SIGTERM signal by the kernel. Fix this so that they are only sent that signal when the master has exited. Signed-off-by: Thomas Hellstrom Reviewed-by: Jakob Bornecrantz Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman commit 598b53ebd0836be3b0d9ffdb100ca83baae506d7 Author: Thomas Hellstrom Date: Wed Oct 9 01:42:50 2013 -0700 drm/vmwgfx: Don't put resources with invalid id's on lru list commit 26682480c202e7360cbcdc3bc9e962bf749c6b8d upstream. The evict code may try to swap them out causing a BUG in the destroy function. Signed-off-by: Thomas Hellstrom Reviewed-by: Jakob Bornecrantz Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman commit c082ab303b4d639e464d9b439b98f983cd6d9078 Author: Chen LinX Date: Wed Oct 30 13:56:18 2013 -0700 mm/pagewalk.c: fix walk_page_range() access of wrong PTEs commit 3017f079efd6af199b0852b5c425364513db460e upstream. When walk_page_range walk a memory map's page tables, it'll skip VM_PFNMAP area, then variable 'next' will to assign to vma->vm_end, it maybe larger than 'end'. In next loop, 'addr' will be larger than 'next'. Then in /proc/XXXX/pagemap file reading procedure, the 'addr' will growing forever in pagemap_pte_range, pte_to_pagemap_entry will access the wrong pte. BUG: Bad page map in process procrank pte:8437526f pmd:785de067 addr:9108d000 vm_flags:00200073 anon_vma:f0d99020 mapping: (null) index:9108d CPU: 1 PID: 4974 Comm: procrank Tainted: G B W O 3.10.1+ #1 Call Trace: dump_stack+0x16/0x18 print_bad_pte+0x114/0x1b0 vm_normal_page+0x56/0x60 pagemap_pte_range+0x17a/0x1d0 walk_page_range+0x19e/0x2c0 pagemap_read+0x16e/0x200 vfs_read+0x84/0x150 SyS_read+0x4a/0x80 syscall_call+0x7/0xb Signed-off-by: Liu ShuoX Signed-off-by: Chen LinX Acked-by: Kirill A. Shutemov Reviewed-by: Naoya Horiguchi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 1d24630054984909554a35c21e2cb06816bc26e5 Author: Cyrill Gorcunov Date: Wed Oct 16 13:46:53 2013 -0700 mm: /proc/pid/pagemap: inspect _PAGE_SOFT_DIRTY only on present pages commit e9cdd6e771580e6ff872e5c64e8b766972c7d1bc upstream. If a page we are inspecting is in swap we may occasionally report it as having soft dirty bit (even if it is clean). The pte_soft_dirty helper should be called on present pte only. Signed-off-by: Cyrill Gorcunov Cc: Pavel Emelyanov Cc: Andy Lutomirski Cc: Matt Mackall Cc: Xiao Guangrong Cc: Marcelo Tosatti Cc: KOSAKI Motohiro Cc: Stephen Rothwell Cc: Peter Zijlstra Cc: "Aneesh Kumar K.V" Reviewed-by: Naoya Horiguchi Cc: Mel Gorman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 4064c039975b16ae0f61b40128bb50e369e0cbd4 Author: Mel Gorman Date: Mon Oct 7 11:28:47 2013 +0100 mm: Account for a THP NUMA hinting update as one PTE update commit 0255d491848032f6c601b6410c3b8ebded3a37b1 upstream. A THP PMD update is accounted for as 512 pages updated in vmstat. This is large difference when estimating the cost of automatic NUMA balancing and can be misleading when comparing results that had collapsed versus split THP. This patch addresses the accounting issue. Signed-off-by: Mel Gorman Reviewed-by: Rik van Riel Cc: Andrea Arcangeli Cc: Johannes Weiner Cc: Srikar Dronamraju Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1381141781-10992-10-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 2e7b837d6d0ee70d557fe32d03544c681ef8c807 Author: Mel Gorman Date: Mon Oct 7 11:28:46 2013 +0100 mm: Close races between THP migration and PMD numa clearing commit 3f926ab945b60a5824369d21add7710622a2eac0 upstream. THP migration uses the page lock to guard against parallel allocations but there are cases like this still open Task A Task B --------------------- --------------------- do_huge_pmd_numa_page do_huge_pmd_numa_page lock_page mpol_misplaced == -1 unlock_page goto clear_pmdnuma lock_page mpol_misplaced == 2 migrate_misplaced_transhuge pmd = pmd_mknonnuma set_pmd_at During hours of testing, one crashed with weird errors and while I have no direct evidence, I suspect something like the race above happened. This patch extends the page lock to being held until the pmd_numa is cleared to prevent migration starting in parallel while the pmd_numa is being cleared. It also flushes the old pmd entry and orders pagetable insertion before rmap insertion. Signed-off-by: Mel Gorman Reviewed-by: Rik van Riel Cc: Andrea Arcangeli Cc: Johannes Weiner Cc: Srikar Dronamraju Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1381141781-10992-9-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit b5af02fe9c4721c3c227e9b4af8450aa4b11cc0e Author: Mel Gorman Date: Mon Oct 7 11:28:45 2013 +0100 mm: numa: Sanitize task_numa_fault() callsites commit c61109e34f60f6e85bb43c5a1cd51c0e3db40847 upstream. There are three callers of task_numa_fault(): - do_huge_pmd_numa_page(): Accounts against the current node, not the node where the page resides, unless we migrated, in which case it accounts against the node we migrated to. - do_numa_page(): Accounts against the current node, not the node where the page resides, unless we migrated, in which case it accounts against the node we migrated to. - do_pmd_numa_page(): Accounts not at all when the page isn't migrated, otherwise accounts against the node we migrated towards. This seems wrong to me; all three sites should have the same sementaics, furthermore we should accounts against where the page really is, we already know where the task is. So modify all three sites to always account; we did after all receive the fault; and always account to where the page is after migration, regardless of success. They all still differ on when they clear the PTE/PMD; ideally that would get sorted too. Signed-off-by: Mel Gorman Reviewed-by: Rik van Riel Cc: Andrea Arcangeli Cc: Johannes Weiner Cc: Srikar Dronamraju Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1381141781-10992-8-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 93a21ff24ff631ae0cc43785dfef9a19ed11f0c6 Author: Mel Gorman Date: Mon Oct 7 11:28:44 2013 +0100 mm: Prevent parallel splits during THP migration commit 587fe586f44a48f9691001ba6c45b86c8e4ba21f upstream. THP migrations are serialised by the page lock but on its own that does not prevent THP splits. If the page is split during THP migration then the pmd_same checks will prevent page table corruption but the unlock page and other fix-ups potentially will cause corruption. This patch takes the anon_vma lock to prevent parallel splits during migration. Signed-off-by: Mel Gorman Reviewed-by: Rik van Riel Cc: Andrea Arcangeli Cc: Johannes Weiner Cc: Srikar Dronamraju Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1381141781-10992-7-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 3753635515193a32d7c93cb1ba56943245a31eb3 Author: Mel Gorman Date: Mon Oct 7 11:28:43 2013 +0100 mm: Wait for THP migrations to complete during NUMA hinting faults commit 42836f5f8baa33085f547098b74aa98991ee9216 upstream. The locking for migrating THP is unusual. While normal page migration prevents parallel accesses using a migration PTE, THP migration relies on a combination of the page_table_lock, the page lock and the existance of the NUMA hinting PTE to guarantee safety but there is a bug in the scheme. If a THP page is currently being migrated and another thread traps a fault on the same page it checks if the page is misplaced. If it is not, then pmd_numa is cleared. The problem is that it checks if the page is misplaced without holding the page lock meaning that the racing thread can be migrating the THP when the second thread clears the NUMA bit and faults a stale page. This patch checks if the page is potentially being migrated and stalls using the lock_page if it is potentially being migrated before checking if the page is misplaced or not. Signed-off-by: Mel Gorman Reviewed-by: Rik van Riel Cc: Andrea Arcangeli Cc: Johannes Weiner Cc: Srikar Dronamraju Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1381141781-10992-6-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit ae9fac9b5433e504c9c4f8f4e73f9b1e70551fb2 Author: Mel Gorman Date: Mon Oct 7 11:28:42 2013 +0100 mm: numa: Do not account for a hinting fault if we raced commit 1dd49bfa3465756b3ce72214b58a33e4afb67aa3 upstream. If another task handled a hinting fault in parallel then do not double account for it. Signed-off-by: Mel Gorman Reviewed-by: Rik van Riel Cc: Andrea Arcangeli Cc: Johannes Weiner Cc: Srikar Dronamraju Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1381141781-10992-5-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 6e181a455cf06c53e0c008190bfe2b4773ed0beb Author: Linus Walleij Date: Fri Sep 13 21:45:51 2013 +0200 clk: nomadik: set all timers to use 2.4 MHz TIMCLK commit b9b5ab11ea221a9f2d5af41da639e0898675c34c upstream. This fixes a regression for the Nomadik on the main system timers. The Nomadik seemed a bit slow and its heartbeat wasn't looking healthy. And it was not strange, because it has been connected to the 32768 Hz clock at boot, while being told by the clock driver that it was 2.4MHz. Actually connect the TIMCLK to 2.4MHz by default as this is what we want for nice scheduling, clocksource and clock event. Signed-off-by: Linus Walleij Signed-off-by: Mike Turquette Signed-off-by: Greg Kroah-Hartman commit 61bcdfc3d95ad7f6d8991652ace93f830c7d2f44 Author: Jonathan Austin Date: Tue Jul 23 16:42:18 2013 +0100 clk: fixup argument order when setting VCO parameters commit 2f9f64bc5aa31836810cd25301aa4772ad73ebab upstream. The order of arguments in the call to vco_set() for the ICST clocks appears to have been switched in error, which results in the VCO not being initialised correctly. This in turn stops the integrated LCD on things like Integrator/CP from working correctly. This patch fixes the order and restores the expected functionality. Reviewed-by: Linus Walleij Signed-off-by: Jonathan Austin Signed-off-by: Mike Turquette Signed-off-by: Greg Kroah-Hartman commit 2af344097ce82d1772d709229adcf02390c3f1b5 Author: Dan Carpenter Date: Tue Oct 29 22:11:06 2013 +0300 aacraid: missing capable() check in compat ioctl commit f856567b930dfcdbc3323261bf77240ccdde01f5 upstream. In commit d496f94d22d1 ('[SCSI] aacraid: fix security weakness') we added a check on CAP_SYS_RAWIO to the ioctl. The compat ioctls need the check as well. Signed-off-by: Dan Carpenter Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit d1a8b8606455ac9bdd329a59fcd04ecc686cf464 Author: Ming Lei Date: Thu Oct 31 16:34:17 2013 -0700 lib/scatterlist.c: don't flush_kernel_dcache_page on slab page commit 3d77b50c5874b7e923be946ba793644f82336b75 upstream. Commit b1adaf65ba03 ("[SCSI] block: add sg buffer copy helper functions") introduces two sg buffer copy helpers, and calls flush_kernel_dcache_page() on pages in SG list after these pages are written to. Unfortunately, the commit may introduce a potential bug: - Before sending some SCSI commands, kmalloc() buffer may be passed to block layper, so flush_kernel_dcache_page() can see a slab page finally - According to cachetlb.txt, flush_kernel_dcache_page() is only called on "a user page", which surely can't be a slab page. - ARCH's implementation of flush_kernel_dcache_page() may use page mapping information to do optimization so page_mapping() will see the slab page, then VM_BUG_ON() is triggered. Aaro Koskinen reported the bug on ARM/kirkwood when DEBUG_VM is enabled, and this patch fixes the bug by adding test of '!PageSlab(miter->page)' before calling flush_kernel_dcache_page(). Signed-off-by: Ming Lei Reported-by: Aaro Koskinen Tested-by: Simon Baatz Cc: Russell King - ARM Linux Cc: Will Deacon Cc: Aaro Koskinen Acked-by: Catalin Marinas Cc: FUJITA Tomonori Cc: Tejun Heo Cc: "James E.J. Bottomley" Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 2f571b30258eb05d90a06e8473cb616c71e822d8 Author: Linus Torvalds Date: Tue Oct 29 10:21:34 2013 -0700 Fix a few incorrectly checked [io_]remap_pfn_range() calls commit 7314e613d5ff9f0934f7a0f74ed7973b903315d1 upstream. Nico Golde reports a few straggling uses of [io_]remap_pfn_range() that really should use the vm_iomap_memory() helper. This trivially converts two of them to the helper, and comments about why the third one really needs to continue to use remap_pfn_range(), and adds the missing size check. Reported-by: Nico Golde Signed-off-by: Linus Torvalds commit 3f4df5cd4308788d9fadc53dbafc4a82f1664066 Author: Uwe Kleine-König Date: Wed Aug 7 13:02:53 2013 +0200 uio: provide vm access to UIO_MEM_PHYS maps commit 7294151d0592e0ff48c61fca9fd7c93d613134da upstream. This makes it possible to let gdb access mappings of the process that is being debugged. uio_mmap_logical was moved and uio_vm_ops renamed to group related code and differentiate to new stuff. Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman commit e2dbe5ab0ee1992fb7134c561518183b511fb81a Author: Uwe Kleine-König Date: Wed Aug 7 13:02:52 2013 +0200 mm: make generic_access_phys available for modules commit 5a73633ef01cd8772defa6a3c34a588376a1df4c upstream. In the next commit this function will be used in the uio subsystem Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman commit c67180d8b89a31e98e71a6d8eb4b01fb2b3a57fd Author: Baruch Siach Date: Tue Oct 15 02:22:43 2013 +0400 xtensa: don't use alternate signal stack on threads commit cba9a90053e3b7973eff4f1946f33032e98eeed5 upstream. According to create_thread(3): "The new thread does not inherit the creating thread's alternate signal stack". Since commit f9a3879a (Fix sigaltstack corruption among cloned threads), current->sas_ss_size is set to 0 for cloned processes sharing VM with their parent. Don't use the (nonexistent) alternate signal stack in this case. This has been broken since commit 29c4dfd9 ([XTENSA] Remove non-rt signal handling). Fixes the SA_ONSTACK part of the nptl/tst-cancel20 test from uClibc. Signed-off-by: Baruch Siach Signed-off-by: Max Filippov Signed-off-by: Chris Zankel Signed-off-by: Greg Kroah-Hartman commit bdc5b2a53590400883693d6946ba5fa11e4c918e Author: Dan Carpenter Date: Tue Oct 29 22:06:04 2013 +0300 uml: check length in exitcode_proc_write() commit 201f99f170df14ba52ea4c52847779042b7a623b upstream. We don't cap the size of buffer from the user so we could write past the end of the array here. Only root can write to this file. Reported-by: Nico Golde Reported-by: Fabian Yamaguchi Signed-off-by: Dan Carpenter Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 9f7c41c84814e5deb18e800227dfaa9ce47ff072 Author: Dan Carpenter Date: Tue Oct 29 23:00:15 2013 +0300 staging: wlags49_h2: buffer overflow setting station name commit b5e2f339865fb443107e5b10603e53bbc92dc054 upstream. We need to check the length parameter before doing the memcpy(). I've actually changed it to strlcpy() as well so that it's NUL terminated. You need CAP_NET_ADMIN to trigger these so it's not the end of the world. Reported-by: Nico Golde Reported-by: Fabian Yamaguchi Signed-off-by: Dan Carpenter Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 21e2e64525f28a9a7c3c29848992a6dfeb877191 Author: Dan Carpenter Date: Tue Oct 29 23:01:43 2013 +0300 Staging: sb105x: info leak in mp_get_count() commit a8b33654b1e3b0c74d4a1fed041c9aae50b3c427 upstream. The icount.reserved[] array isn't initialized so it leaks stack information to userspace. Reported-by: Nico Golde Reported-by: Fabian Yamaguchi Signed-off-by: Dan Carpenter Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit fe6e2eab80efdc706aee9d83c70961cc4ae9c17f Author: Dan Carpenter Date: Tue Oct 29 23:01:11 2013 +0300 Staging: bcm: info leak in ioctl commit 8d1e72250c847fa96498ec029891de4dc638a5ba upstream. The DevInfo.u32Reserved[] array isn't initialized so it leaks kernel information to user space. Reported-by: Nico Golde Reported-by: Fabian Yamaguchi Signed-off-by: Dan Carpenter Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 0622771fb23e520ce667ef7d9ed2670ec2223897 Author: Dan Carpenter Date: Tue Oct 29 22:07:47 2013 +0300 staging: ozwpan: prevent overflow in oz_cdev_write() commit c2c65cd2e14ada6de44cb527e7f1990bede24e15 upstream. We need to check "count" so we don't overflow the ei->data buffer. Reported-by: Nico Golde Reported-by: Fabian Yamaguchi Signed-off-by: Dan Carpenter Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 6de317283eb18f5f766305fb7770ebc9760994e8 Author: Takashi Iwai Date: Mon Oct 28 14:21:49 2013 +0100 ASoC: dapm: Fix source list debugfs outputs commit ff18620c2157671a8ee21ebb8e6a3520ea209b1f upstream. ... due to a copy & paste error. Spotted by coverity CID 710923. Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit c6eb542209451e4a81501d3c118399013bd66426 Author: Takashi Iwai Date: Wed Oct 30 08:35:02 2013 +0100 ASoC: wm_hubs: Add missing break in hp_supply_event() commit 268ff14525edba31da29a12a9dd693cdd6a7872e upstream. Spotted by coverity CID 115170. Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 6c8f27d4c51b57795ad8a2f206ac81ffba819e9a Author: Russell King Date: Thu Oct 31 15:01:37 2013 +0000 ALSA: fix oops in snd_pcm_info() caused by ASoC DPCM commit a4461f41b94cb52e0141af717dcf4ef6558c8e2e upstream. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = d5300000 [00000008] *pgd=0d265831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM CPU: 0 PID: 2295 Comm: vlc Not tainted 3.11.0+ #755 task: dee74800 ti: e213c000 task.ti: e213c000 PC is at snd_pcm_info+0xc8/0xd8 LR is at 0x30232065 pc : [] lr : [<30232065>] psr: a0070013 sp : e213dea8 ip : d81cb0d0 fp : c05f7678 r10: c05f7770 r9 : fffffdfd r8 : 00000000 r7 : d8a968a8 r6 : d8a96800 r5 : d8a96200 r4 : d81cb000 r3 : 00000000 r2 : d81cb000 r1 : 00000001 r0 : d8a96200 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 15300019 DAC: 00000015 Process vlc (pid: 2295, stack limit = 0xe213c248) [] (snd_pcm_info) from [] (snd_pcm_info_user+0x34/0x9c) [] (snd_pcm_info_user) from [] (snd_pcm_control_ioctl+0x274/0x280) [] (snd_pcm_control_ioctl) from [] (snd_ctl_ioctl+0xc0/0x55c) [] (snd_ctl_ioctl) from [] (do_vfs_ioctl+0x80/0x31c) [] (do_vfs_ioctl) from [] (SyS_ioctl+0x3c/0x60) [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x48) Code: e1a00005 e59530dc e3a01001 e1a02004 (e5933008) ---[ end trace cb3d9bdb8dfefb3c ]--- This is provoked when the ASoC front end is open along with its backend, (which causes the backend to have a runtime assigned to it) and then the SNDRV_CTL_IOCTL_PCM_INFO is requested for the (visible) backend device. Resolve this by ensuring that ASoC internal backend devices are not visible to userspace, just as the commentry for snd_pcm_new_internal() says it should be. Signed-off-by: Russell King Acked-by: Mark Brown Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 51ad39f8592d7d208ae8fd321c708aedf4ce6020 Author: Takashi Iwai Date: Wed Oct 30 12:29:40 2013 +0100 ALSA: hda - Add a fixup for ASUS N76VZ commit 6fc16e58adf50c0f1e4478538983fb5ff6f453d4 upstream. ASUS N76VZ needs the same fixup as N56VZ for supporting the boost speaker. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=846529 Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit d1471eb15b7b25c5da001d65e42c4d39ce334f6c Author: Takashi Iwai Date: Thu Oct 24 01:20:24 2013 +0200 ALSA: hda - Fix unbalanced runtime PM refcount after S3/S4 commit e6bbe666673ab044a3d39ddb74e4d9a401cf1d6f upstream. When a machine goes to S3/S4 after power-save is enabled, the runtime PM refcount might be incorrectly decreased because the power-down triggered soon after resume assumes that the controller was already powered up, and issues the pm_notify down. This patch fixes the incorrect pm_notify call simply by checking the current value properly. Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 77ee1271696b85cbeaf617e6630769ad28b728fd Author: Takashi Iwai Date: Fri Oct 25 23:43:10 2013 +0200 ALSA: hda - Add missing initial vmaster hook at build_controls callback commit b63eae0a6c84839275a4638a7baa391be965cd0e upstream. The generic parser has a support of vmaster hook, but this is initialized only in the init callback with the check of the presence of the corresponding kctl. However, since kctl is NULL at the very first init callback that is called before build_controls callback, the vmaster hook sync is skipped there. Eventually this leads to the uninitialized state depending on the hook implementation. This patch adds a simple workaround, just calling the sync function explicitly at build_controls callback. Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 9d3a5278be634f01bf1a304ebd719848e154e1ff Author: Vineet Gupta Date: Sat Nov 2 17:47:49 2013 +0530 ARC: Incorrect mm reference used in vmalloc fault handler commit 9c41f4eeb9d51f3ece20428d35a3ea32cf3b5622 upstream. A vmalloc fault needs to sync up PGD/PTE entry from init_mm to current task's "active_mm". ARC vmalloc fault handler however was using mm. A vmalloc fault for non user task context (actually pre-userland, from init thread's open for /dev/console) caused the handler to deref NULL mm (for mm->pgd) The reasons it worked so far is amazing: 1. By default (!SMP), vmalloc fault handler uses a cached value of PGD. In SMP that MMU register is repurposed hence need for mm pointer deref. 2. In pre-3.12 SMP kernel, the problem triggering vmalloc didn't exist in pre-userland code path - it was introduced with commit 20bafb3d23d108bc "n_tty: Move buffers into n_tty_data" Signed-off-by: Vineet Gupta Cc: Gilad Ben-Yossef Cc: Noam Camus Cc: Peter Hurley Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit c891251cabbc6e95b6de2ab1ece4873d918ae643 Author: Ming Lei Date: Sat Nov 2 09:11:33 2013 +1030 scripts/kallsyms: filter symbols not in kernel address space commit f6537f2f0eba4eba3354e48dbe3047db6d8b6254 upstream. This patch uses CONFIG_PAGE_OFFSET to filter symbols which are not in kernel address space because these symbols are generally for generating code purpose and can't be run at kernel mode, so we needn't keep them in /proc/kallsyms. For example, on ARM there are some symbols which may be linked in relocatable code section, then perf can't parse symbols any more from /proc/kallsyms, this patch fixes the problem (introduced b9b32bf70f2fb710b07c94e13afbc729afe221da) Cc: Russell King Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Marek Signed-off-by: Ming Lei Signed-off-by: Rusty Russell Signed-off-by: Greg Kroah-Hartman commit 9fefdfec714df1e1a2c82936f979fcd815a631b0 Author: Helge Deller Date: Sat Oct 26 23:19:25 2013 +0200 parisc: Do not crash 64bit SMP kernels on machines with >= 4GB RAM commit 54e181e073fc1415e41917d725ebdbd7de956455 upstream. Since the beginning of the parisc-linux port, sometimes 64bit SMP kernels were not able to bring up other CPUs than the monarch CPU and instead crashed the kernel. The reason was unclear, esp. since it involved various machines (e.g. J5600, J6750 and SuperDome). Testing showed, that those crashes didn't happened when less than 4GB were installed, or if a 32bit Linux kernel was booted. In the end, the fix for those SMP problems is trivial: During the early phase of the initialization of the CPUs, including the monarch CPU, the PDC_PSW firmware function to enable WIDE (=64bit) mode is called. It's documented that this firmware function may clobber various registers, and one one of those possibly clobbered registers is %cr30 which holds the task thread info pointer. Now, if %cr30 would always have been clobbered, then this bug would have been detected much earlier. But lots of testing finally showed, that - at least for %cr30 - on some machines only the upper 32bits of the 64bit register suddenly turned zero after the firmware call. So, after finding the root cause, the explanation for the various crashes became clear: - On 32bit SMP Linux kernels all upper 32bit were zero, so we didn't faced this problem. - Monarch CPUs in 64bit mode always booted sucessfully, because the inital task thread info pointer was below 4GB. - Secondary CPUs booted sucessfully on machines with less than 4GB RAM because the upper 32bit were zero anyay. - Secondary CPus failed to boot if we had more than 4GB RAM and the task thread info pointer was located above the 4GB boundary. Finally, the patch to fix this problem is trivial by saving the %cr30 register before the firmware call and restoring it afterwards. Signed-off-by: Helge Deller Signed-off-by: John David Anglin Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 728ccd1f9a6e8ec19e001d8b4d1e2930c9034068 Author: Thomas Gleixner Date: Tue Sep 24 21:50:23 2013 +0200 clockevents: Sanitize ticks to nsec conversion commit 97b9410643475d6557d2517c2aff9fd2221141a9 upstream. Marc Kleine-Budde pointed out, that commit 77cc982 "clocksource: use clockevents_config_and_register() where possible" caused a regression for some of the converted subarchs. The reason is, that the clockevents core code converts the minimal hardware tick delta to a nanosecond value for core internal usage. This conversion is affected by integer math rounding loss, so the backwards conversion to hardware ticks will likely result in a value which is less than the configured hardware limitation. The affected subarchs used their own workaround (SIGH!) which got lost in the conversion. The solution for the issue at hand is simple: adding evt->mult - 1 to the shifted value before the integer divison in the core conversion function takes care of it. But this only works for the case where for the scaled math mult/shift pair "mult <= 1 << shift" is true. For the case where "mult > 1 << shift" we can apply the rounding add only for the minimum delta value to make sure that the backward conversion is not less than the given hardware limit. For the upper bound we need to omit the rounding add, because the backwards conversion is always larger than the original latch value. That would violate the upper bound of the hardware device. Though looking closer at the details of that function reveals another bogosity: The upper bounds check is broken as well. Checking for a resulting "clc" value greater than KTIME_MAX after the conversion is pointless. The conversion does: u64 clc = (latch << evt->shift) / evt->mult; So there is no sanity check for (latch << evt->shift) exceeding the 64bit boundary. The latch argument is "unsigned long", so on a 64bit arch the handed in argument could easily lead to an unnoticed shift overflow. With the above rounding fix applied the calculation before the divison is: u64 clc = (latch << evt->shift) + evt->mult - 1; So we need to make sure, that neither the shift nor the rounding add is overflowing the u64 boundary. [ukl: move assignment to rnd after eventually changing mult, fix build issue and correct comment with the right math] Signed-off-by: Thomas Gleixner Cc: Russell King - ARM Linux Cc: Marc Kleine-Budde Cc: nicolas.ferre@atmel.com Cc: Marc Pignat Cc: john.stultz@linaro.org Cc: kernel@pengutronix.de Cc: Ronald Wahl Cc: LAK Cc: Ludovic Desroches Link: http://lkml.kernel.org/r/1380052223-24139-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman commit f47b4a5c772de4df3c908f7d9d70ededf3a98290 Author: Nicholas Bellinger Date: Fri Oct 25 10:44:15 2013 -0700 vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameter commit 60a01f558af9c48b0bb31f303c479e32721add3f upstream. This patch addresses a long-standing bug where the get_user_pages_fast() write parameter used for setting the underlying page table entry permission bits was incorrectly set to write=1 for data_direction=DMA_TO_DEVICE, and passed into get_user_pages_fast() via vhost_scsi_map_iov_to_sgl(). However, this parameter is intended to signal WRITEs to pinned userspace PTEs for the virtio-scsi DMA_FROM_DEVICE -> READ payload case, and *not* for the virtio-scsi DMA_TO_DEVICE -> WRITE payload case. This bug would manifest itself as random process segmentation faults on KVM host after repeated vhost starts + stops and/or with lots of vhost endpoints + LUNs. Cc: Stefan Hajnoczi Cc: Michael S. Tsirkin Cc: Asias He Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman commit 853da30c8ed0b0e1f46c325ad07f8f29766a7070 Author: Wei Yongjun Date: Fri Oct 25 21:53:33 2013 +0800 target/pscsi: fix return value check commit 58932e96e438cd78f75e765d7b87ef39d3533d15 upstream. In case of error, the function scsi_host_lookup() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman commit 246d77a83ed063b021484961e3e2a67096231640 Author: Roland Dreier Date: Tue Oct 8 09:47:22 2013 -0700 target: Fix assignment of LUN in tracepoints commit 2053a1db41193c2b5e1f47a91aaba0fd63ba7102 upstream. The unpacked_lun field in the SCSI target tracepoints should be initialized with cmd->orig_fe_lun rather than cmd->se_lun->unpacked_lun for two reasons: - most importantly, if we are in the cmd_complete tracepoint returning a check condition due to no LUN found, cmd->se_lun will be NULL and we'll crash trying to dereference it. - also, in any case, cmd->se_lun->unpacked_lun is an internal index into the target's internal set of LUNs; cmd->orig_fe_lun is much more useful and interesting, since it's the value the initiator actually sent. Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman commit 790c6e06934c132f5bdbce4fbf791236272f9763 Author: Lukasz Dorau Date: Thu Oct 24 12:55:17 2013 +1100 md: Fix skipping recovery for read-only arrays. commit 61e4947c99c4494336254ec540c50186d186150b upstream. Since: commit 7ceb17e87bde79d285a8b988cfed9eaeebe60b86 md: Allow devices to be re-added to a read-only array. spares are activated on a read-only array. In case of raid1 and raid10 personalities it causes that not-in-sync devices are marked in-sync without checking if recovery has been finished. If a read-only array is degraded and one of its devices is not in-sync (because the array has been only partially recovered) recovery will be skipped. This patch adds checking if recovery has been finished before marking a device in-sync for raid1 and raid10 personalities. In case of raid5 personality such condition is already present (at raid5.c:6029). Bug was introduced in 3.10 and causes data corruption. Signed-off-by: Pawel Baldysiak Signed-off-by: Lukasz Dorau Signed-off-by: NeilBrown Signed-off-by: Greg Kroah-Hartman commit 1b00915de0908f436868671f1febeb03943f7a34 Author: Bian Yu Date: Sat Oct 12 01:10:03 2013 -0400 md: avoid deadlock when md_set_badblocks. commit 905b0297a9533d7a6ee00a01a990456636877dd6 upstream. When operate harddisk and hit errors, md_set_badblocks is called after scsi_restart_operations which already disabled the irq. but md_set_badblocks will call write_sequnlock_irq and enable irq. so softirq can preempt the current thread and that may cause a deadlock. I think this situation should use write_sequnlock_irqsave/irqrestore instead. I met the situation and the call trace is below: [ 638.919974] BUG: spinlock recursion on CPU#0, scsi_eh_13/1010 [ 638.921923] lock: 0xffff8800d4d51fc8, .magic: dead4ead, .owner: scsi_eh_13/1010, .owner_cpu: 0 [ 638.923890] CPU: 0 PID: 1010 Comm: scsi_eh_13 Not tainted 3.12.0-rc5+ #37 [ 638.925844] Hardware name: To be filled by O.E.M. To be filled by O.E.M./MAHOBAY, BIOS 4.6.5 03/05/2013 [ 638.927816] ffff880037ad4640 ffff880118c03d50 ffffffff8172ff85 0000000000000007 [ 638.929829] ffff8800d4d51fc8 ffff880118c03d70 ffffffff81730030 ffff8800d4d51fc8 [ 638.931848] ffffffff81a72eb0 ffff880118c03d90 ffffffff81730056 ffff8800d4d51fc8 [ 638.933884] Call Trace: [ 638.935867] [] dump_stack+0x55/0x76 [ 638.937878] [] spin_dump+0x8a/0x8f [ 638.939861] [] spin_bug+0x21/0x26 [ 638.941836] [] do_raw_spin_lock+0xa4/0xc0 [ 638.943801] [] _raw_spin_lock+0x66/0x80 [ 638.945747] [] ? scsi_device_unbusy+0x9d/0xd0 [ 638.947672] [] ? _raw_spin_unlock+0x2b/0x50 [ 638.949595] [] scsi_device_unbusy+0x9d/0xd0 [ 638.951504] [] scsi_finish_command+0x37/0xe0 [ 638.953388] [] scsi_softirq_done+0xa8/0x140 [ 638.955248] [] blk_done_softirq+0x7b/0x90 [ 638.957116] [] __do_softirq+0xfd/0x330 [ 638.958987] [] ? __lock_release+0x6f/0x100 [ 638.960861] [] call_softirq+0x1c/0x30 [ 638.962724] [] do_softirq+0x8d/0xc0 [ 638.964565] [] irq_exit+0x10e/0x150 [ 638.966390] [] smp_apic_timer_interrupt+0x4a/0x60 [ 638.968223] [] apic_timer_interrupt+0x6f/0x80 [ 638.970079] [] ? __lock_release+0x6f/0x100 [ 638.971899] [] ? _raw_spin_unlock_irq+0x3a/0x50 [ 638.973691] [] ? _raw_spin_unlock_irq+0x30/0x50 [ 638.975475] [] md_set_badblocks+0x1f3/0x4a0 [ 638.977243] [] rdev_set_badblocks+0x27/0x80 [ 638.978988] [] raid5_end_read_request+0x36b/0x4e0 [raid456] [ 638.980723] [] bio_endio+0x1d/0x40 [ 638.982463] [] req_bio_endio.isra.65+0x83/0xa0 [ 638.984214] [] blk_update_request+0x7f/0x350 [ 638.985967] [] blk_update_bidi_request+0x31/0x90 [ 638.987710] [] __blk_end_bidi_request+0x20/0x50 [ 638.989439] [] __blk_end_request_all+0x1f/0x30 [ 638.991149] [] blk_peek_request+0x106/0x250 [ 638.992861] [] ? scsi_kill_request.isra.32+0xe9/0x130 [ 638.994561] [] scsi_request_fn+0x4a/0x3d0 [ 638.996251] [] __blk_run_queue+0x37/0x50 [ 638.997900] [] blk_run_queue+0x2f/0x50 [ 638.999553] [] scsi_run_queue+0xe0/0x1c0 [ 639.001185] [] scsi_run_host_queues+0x21/0x40 [ 639.002798] [] scsi_restart_operations+0x177/0x200 [ 639.004391] [] scsi_error_handler+0xc9/0xe0 [ 639.005996] [] ? scsi_unjam_host+0xd0/0xd0 [ 639.007600] [] kthread+0xdb/0xe0 [ 639.009205] [] ? flush_kthread_worker+0x170/0x170 [ 639.010821] [] ret_from_fork+0x7c/0xb0 [ 639.012437] [] ? flush_kthread_worker+0x170/0x170 This bug was introduce in commit 2e8ac30312973dd20e68073653 (the first time rdev_set_badblock was call from interrupt context), so this patch is appropriate for 3.5 and subsequent kernels. Signed-off-by: Bian Yu Reviewed-by: Jianpeng Ma Signed-off-by: NeilBrown Signed-off-by: Greg Kroah-Hartman commit 83da8ac7ee52d56e9bf5626502cca6e8e169580c Author: Rafael J. Wysocki Date: Tue Oct 29 23:43:08 2013 +0100 Revert "select: use freezable blocking call" commit 59612d187912750f416fbffe0c00bc0811c54ab5 upstream. This reverts commit 9745cdb36da8 (select: use freezable blocking call) that triggers problems during resume from suspend to RAM on Paul Bolle's 32-bit x86 machines. Paul says: Ever since I tried running (release candidates of) v3.11 on the two working i686s I still have lying around I ran into issues on resuming from suspend. Reverting 9745cdb36da8 (select: use freezable blocking call) resolves those issues. Resuming from suspend on i686 on (release candidates of) v3.11 and later triggers issues like: traps: systemd[1] general protection ip:b738e490 sp:bf882fc0 error:0 in libc-2.16.so[b731c000+1b0000] and traps: rtkit-daemon[552] general protection ip:804d6e5 sp:b6cb32f0 error:0 in rtkit-daemon[8048000+d000] Once I hit the systemd error I can only get out of the mess that the system is at that point by power cycling it. Since we are reverting another freezer-related change causing similar problems to happen, this one should be reverted as well. References: https://lkml.org/lkml/2013/10/29/583 Reported-by: Paul Bolle Fixes: 9745cdb36da8 (select: use freezable blocking call) Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 7668bd83b5e7fd1519b1fd92226a948299692e6b Author: Rafael J. Wysocki Date: Tue Oct 29 13:12:56 2013 +0100 Revert "epoll: use freezable blocking call" commit c511851de162e8ec03d62e7d7feecbdf590d881d upstream. This reverts commit 1c441e921201 (epoll: use freezable blocking call) which is reported to cause user space memory corruption to happen after suspend to RAM. Since it appears to be extremely difficult to root cause this problem, it is best to revert the offending commit and try to address the original issue in a better way later. References: https://bugzilla.kernel.org/show_bug.cgi?id=61781 Reported-by: Natrio Reported-by: Jeff Pohlmeyer Bisected-by: Leo Wolf Fixes: 1c441e921201 (epoll: use freezable blocking call) Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit e5804987902e8ab21459acd70217f889e06447d5 Author: Stanislaw Gruszka Date: Mon Sep 23 04:08:13 2013 +0200 Revert "rt2x00pci: Use PCI MSIs whenever possible" commit dfb6b7c109a7f98d324a759599d1b4616f02c79f upstream. This reverts commit 9483f40d8d01918b399b4e24d0c1111db0afffeb. Some devices stop to connect with above commit, see: https://bugzilla.kernel.org/show_bug.cgi?id=61621 Since there is no clear benefit of having MSI enabled, just revert change to fix the problem. Signed-off-by: Stanislaw Gruszka Acked-by: Jakub Kicinski Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman commit ababf744ce845f93bf9810753cec861b0e6c97f8 Author: Gwendal Grignou Date: Fri Aug 7 16:17:49 2009 -0700 libata: make ata_eh_qc_retry() bump scmd->allowed on bogus failures commit f13e220161e738c2710b9904dcb3cf8bb0bcce61 upstream. libata EH decrements scmd->retries when the command failed for reasons unrelated to the command itself so that, for example, commands aborted due to suspend / resume cycle don't get penalized; however, decrementing scmd->retries isn't enough for ATA passthrough commands. Without this fix, ATA passthrough commands are not resend to the drive, and no error is signalled to the caller because: - allowed retry count is 1 - ata_eh_qc_complete fill the sense data, so result is valid - sense data is filled with untouched ATA registers. Signed-off-by: Gwendal Grignou Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit 8aabed06e0f51f4a71540350bb62c79d2913c54b Author: Shaohua Li Date: Sat Oct 19 14:51:42 2013 +0800 raid5: avoid finding "discard" stripe commit d47648fcf0611812286f68131b40251c6fa54f5e upstream. SCSI discard will damage discard stripe bio setting, eg, some fields are changed. If the stripe is reused very soon, we have wrong bios setting. We remove discard stripe from hash list, so next time the strip will be fully initialized. Suitable for backport to 3.7+. Signed-off-by: Shaohua Li Signed-off-by: NeilBrown Signed-off-by: Greg Kroah-Hartman commit b2a097d602f04c485b73deee3476a502edae3ac9 Author: Shaohua Li Date: Sat Oct 19 14:50:28 2013 +0800 raid5: set bio bi_vcnt 0 for discard request commit 37c61ff31e9b5e3fcf3cc6579f5c68f6ad40c4b1 upstream. SCSI layer will add new payload for discard request. If two bios are merged to one, the second bio has bi_vcnt 1 which is set in raid5. This will confuse SCSI and cause oops. Suitable for backport to 3.7+ Reported-by: Jes Sorensen Signed-off-by: Shaohua Li Signed-off-by: NeilBrown Acked-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 5ca6a948fb97c27ae9f352c254063f7fe342d30c Author: Colin Ian King Date: Thu Oct 24 14:08:07 2013 +0000 eCryptfs: fix 32 bit corruption issue commit 43b7c6c6a4e3916edd186ceb61be0c67d1e0969e upstream. Shifting page->index on 32 bit systems was overflowing, causing data corruption of > 4GB files. Fix this by casting it first. https://launchpad.net/bugs/1243636 Signed-off-by: Colin Ian King Reported-by: Lars Duesing Signed-off-by: Tyler Hicks Signed-off-by: Greg Kroah-Hartman commit ff2d90ef8a5f51c8aceb61156fd276da36eb158f Author: Geyslan G. Bem Date: Fri Oct 11 16:49:16 2013 -0300 ecryptfs: Fix memory leakage in keystore.c commit 3edc8376c06133e3386265a824869cad03a4efd4 upstream. In 'decrypt_pki_encrypted_session_key' function: Initializes 'payload' pointer and releases it on exit. Signed-off-by: Geyslan G. Bem Signed-off-by: Tyler Hicks Signed-off-by: Greg Kroah-Hartman commit 836a6eec8e00243f10b40b066673e572d690adf7 Author: Aaron Lu Date: Thu Oct 10 13:22:36 2013 +0800 SCSI: sd: call blk_pm_runtime_init before add_disk commit 10c580e4239df5c3344ca00322eca86ab2de880b upstream. Sujit has found a race condition that would make q->nr_pending unbalanced, it occurs as Sujit explained: " sd_probe_async() -> add_disk() -> disk_add_event() -> schedule(disk_events_workfn) sd_revalidate_disk() blk_pm_runtime_init() return; Let's say the disk_events_workfn() calls sd_check_events() which tries to send test_unit_ready() and because of sd_revalidate_disk() trying to send another commands the test_unit_ready() might be re-queued as the tagged command queuing is disabled. So the race condition is - Thread 1 | Thread 2 sd_revalidate_disk() | sd_check_events() ...nr_pending = 0 as q->dev = NULL| scsi_queue_insert() blk_runtime_pm_init() | blk_pm_requeue_request() -> | nr_pending = -1 since | q->dev != NULL " The problem is, the test_unit_ready request doesn't get counted the first time it is queued, so the later decrement of q->nr_pending in blk_pm_requeue_request makes it unbalanced. Fix this by calling blk_pm_runtime_init before add_disk so that all requests initiated there will all be counted. Signed-off-by: Aaron Lu Reported-and-tested-by: Sujit Reddy Thumma Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman commit e353d5ce7cc2c6636bde123869e43b3b007708f2 Author: Khalid Aziz Date: Wed Sep 25 11:45:11 2013 -0600 SCSI: BusLogic: Fix an oops when intializing multimaster adapter commit 6541932ea2f7de0b0c5203decf666b143ad5fa33 upstream. This fixes an oops caused by buslogic driver when initializing a BusLogic MultiMaster adapter. Initialization code used scope of a variable incorrectly which created a NULL pointer. Oops message is below: BUG: unable to handle kernel NULL pointer dereference at 0000000c IP: [] blogic_init_mm_probeinfo.isra.17+0x20a/0x583 *pde = 00000000 Oops: 002 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.11.1.puz1 #1 Hardware name: /Canterwood, BIOS 6.00 PG 05/16/2003 task: f7050000 ti: f7054000 task.ti: f7054000 EIP: 0060:[] EFLAGS: 00010246 CPU:1 EIP is at blogic_init_mm_probeinfo.isra.17+0x20a/0x583 EAX: 00000013 EBX: 00000000 ECX: 00000000 EDX: f8001000 ESI: f71cb800 EDI: f7388000 EBP: 00007800 ESP: f7055c84 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: 0000000c CR3: 0154f000 CR4: 000007d0 Stack: 0000001c 00000000 c11a59f6 f7055c98 00008130 ffffffff ffffffff 00000000 00000003 00000000 00000000 00000000 00000013 f8001000 00000001 000003d0 00000000 00000000 00000000 c14e3f84 f78803c8 00000000 f738c000 000000e9 Call Trace: [] ? pci_get_subsys+0x33/0x38 [] ? blogic_init_probeinfo_list+0x4b/0x19e [] ? __alloc_pages_nodemask+0xe3/0x623 [] ? __alloc_pages_nodemask+0xe3/0x623 [] ? sysfs_link_sibling+0x61/0x8d [] ? kmem_cache_alloc+0x8b/0xb5 [] ? blogic_init+0xa1/0x10e8 [] ? sysfs_add_one+0x10/0x9d [] ? sysfs_addrm_finish+0x12/0x85 [] ? sysfs_do_create_link_sd+0x9d/0x1b4 [] ? blk_register_queue+0x69/0xb3 [] ? sysfs_create_link+0x1a/0x2c [] ? add_disk+0x1a1/0x3c7 [] ? klist_next+0x60/0xc3 [] ? scsi_dh_detach+0x68/0x68 [] ? bus_for_each_dev+0x51/0x61 [] ? do_one_initcall+0x22/0x12c [] ? __proc_create+0x8c/0xba [] ? blogic_setup+0x5f6/0x5f6 [] ? repair_env_string+0xf/0x4d [] ? do_early_param+0x71/0x71 [] ? parse_args+0x21f/0x33d [] ? kernel_init_freeable+0xdf/0x17d [] ? do_early_param+0x71/0x71 [] ? kernel_init+0x8/0xc0 [] ? ret_from_kernel_thread+0x6/0x28 [] ? ret_from_kernel_thread+0x1b/0x28 [] ? rest_init+0x6c/0x6c Code: 89 44 24 10 0f b6 44 24 3d 89 44 24 0c c7 44 24 08 00 00 00 00 c7 44 24 04 38 62 46 c1 c7 04 24 02 00 00 00 e8 78 13 d2 ff 31 db <89> 6b 0c b0 20 89 ea ee c7 44 24 08 04 00 00 00 8d 44 24 4c 89 EIP: [] blogic_init_mm_probeinfo.isra.17+0x20a/0x583 SS:ESP 0068:f7055c84 CR2: 000000000000000c ---[ end trace 17f45f5196d40487 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 Signed-off-by: Khalid Aziz Reported-by: Pierre Uszynski Tested-by: Pierre Uszynski Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman commit 96424f593af6d547c677b91d3570827895db51bf Author: Marc Kleine-Budde Date: Fri Oct 4 10:52:36 2013 +0200 can: flexcan: flexcan_chip_start: fix regression, mark one MB for TX and abort pending TX commit d5a7b406c529e4595ce03dc8f6dcf7fa36f106fa upstream. In patch 0d1862e can: flexcan: fix flexcan_chip_start() on imx6 the loop in flexcan_chip_start() that iterates over all mailboxes after the soft reset of the CAN core was removed. This loop put all mailboxes (even the ones marked as reserved 1...7) into EMPTY/INACTIVE mode. On mailboxes 8...63, this aborts any pending TX messages. After a cold boot there is random garbage in the mailboxes, which leads to spontaneous transmit of CAN frames during first activation. Further if the interface was disabled with a pending message (usually due to an error condition on the CAN bus), this message is retransmitted after enabling the interface again. This patch fixes the regression by: 1) Limiting the maximum number of used mailboxes to 8, 0...7 are used by the RX FIFO, 8 is used by TX. 2) Marking the TX mailbox as EMPTY/INACTIVE, so that any pending TX of that mailbox is aborted. Cc: Lothar Waßmann Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit e7443e576411e4c16b63f68d979a605013b8f8c8 Author: Marc Kleine-Budde Date: Thu Oct 3 23:51:55 2013 +0200 can: flexcan: fix mx28 detection by rearanging OF match table commit e358784297992b012e8071764d996191dd2b1a54 upstream. The current implemetation of of_match_device() relies that the of_device_id table in the driver is sorted from most specific to least specific compatible. Without this patch the mx28 is detected as the less specific p1010. This leads to a p1010 specific workaround is activated on the mx28, which is not needed. Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit bf089b665ab4c8c27daed6259adaa90793970a3a Author: Marc Kleine-Budde Date: Wed Oct 9 12:19:19 2013 +0200 can: at91-can: fix device to driver data mapping for platform devices commit 5abbeea553c8260ed4e2ac4aae962aff800b6c6d upstream. In commit: 3078cde7 can: at91_can: add dt support device tree support was added to the at91_can driver. In this commit the mapping of device to driver data was mixed up. This results in the sam9x5 parameters being used for the sam9263 and the workaround for the broken mailbox 0 on the sam9263 not being activated. This patch fixes the broken platform_device_id table. Cc: Ludovic Desroches Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit a2bab673619581372fae453569d247063708b706 Author: Dave Kleikamp Date: Fri Sep 6 21:49:56 2013 -0500 jfs: fix error path in ialloc commit 8660998608cfa1077e560034db81885af8e1e885 upstream. If insert_inode_locked() fails, we shouldn't be calling unlock_new_inode(). Signed-off-by: Dave Kleikamp Tested-by: Michael L. Semon Signed-off-by: Greg Kroah-Hartman commit f00f0f238a5e9624bd651f939a34b009cdb9dc9d Author: Emmanuel Grumbach Date: Tue Sep 24 19:34:26 2013 +0300 iwlwifi: pcie: add SKUs for 6000, 6005 and 6235 series commit 08a5dd3842f2ac61c6d69661d2d96022df8ae359 upstream. Add some new PCI IDs to the table for 6000, 6005 and 6235 series. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit cb59afeec59a06583359f685290ebb1eeff7a42e Author: Emmanuel Grumbach Date: Sun Sep 15 14:39:02 2013 +0300 iwlwifi: mvm: call ieee80211_scan_completed when needed commit 5a3e9f7f8c8768b5f7df81100c684e4cd00a6eb5 upstream. When RFKill cuts short a scan, mac80211 cancels the scan. This is done by sending a host command to the firmware, but this command was dropped because of RFKill. Flag this command as "SEND_IN_RFKILL" to make sure it is sent to the firmware. The firmware will send SCAN_COMPLETE_NOTIFICATION which will trigger a call to ieee80211_scan_completed. If the scan cannot be aborted, it is because the firmware already finished the scan but we hadn't notified mac80211 at the time mac80211 decided to cancel the scan. By the time we see the scan could not be aborted, mac80211 has been notified already. This patch fixes situations in which we didn't notify mac80211 upon completion of the scan that was cut short by RFkill. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 35a9611020cc8d42995c77e30db9e2e48ec831f0 Author: Mark Cave-Ayland Date: Tue Oct 8 10:18:20 2013 -0500 rtlwifi: rtl8192cu: Fix error in pointer arithmetic commit 9473ca6e920a3b9ca902753ce52833657f9221cc upstream. An error in calculating the offset in an skb causes the driver to read essential device info from the wrong locations. The main effect is that automatic gain calculations are nonsense. Signed-off-by: Mark Cave-Ayland Signed-off-by: Larry Finger Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman commit ecaa9a5393c6efea168c0092058a44e67c6ffa23 Author: Amitkumar Karwar Date: Fri Sep 27 10:55:38 2013 -0700 mwifiex: fix SDIO interrupt lost issue commit 453b0c3f6910672f79da354077af728d92f95c5b upstream. 601216e "mwifiex: process RX packets in SDIO IRQ thread directly" introduced a command timeout issue which can be reproduced easily on an AM33xx platform using a test application written by Daniel Mack: https://gist.github.com/zonque/6579314 mwifiex_main_process() is called from both the SDIO handler and the workqueue. In case an interrupt occurs right after the int_status check, but before updating the mwifiex_processing flag, this interrupt gets lost, resulting in a command timeout and consequently a card reset. Let main_proc_lock protect both int_status and mwifiex_processing flag. This fixes the interrupt lost issue. Reported-by: Sven Neumann Reported-by: Andreas Fenkart Tested-by: Daniel Mack Reviewed-by: Dylan Reid Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Paul Stewart Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman commit 3ace6195f05329e8c1e18b4a45c2f605ac922042 Author: Bruno Randolf Date: Thu Sep 26 16:55:28 2013 +0100 cfg80211: fix warning when using WEXT for IBSS commit f478f33a93f9353dcd1fe55445343d76b1c3f84a upstream. Fix kernel warning when using WEXT for configuring ad-hoc mode, e.g. "iwconfig wlan0 essid test channel 1" WARNING: at net/wireless/chan.c:373 cfg80211_chandef_usable+0x50/0x21c [cfg80211]() The warning is caused by an uninitialized variable center_freq1. Signed-off-by: Bruno Randolf Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 1252286e425da7485af9bb0506c029ac61de30df Author: Luciano Coelho Date: Thu Aug 29 13:26:57 2013 +0300 cfg80211: use the correct macro to check for active monitor support commit 180032973ee97daddf5c9d733e5b425b108f8679 upstream. Use MONITOR_FLAG_ACTIVE, which is a flag mask, instead of NL80211_MNTR_FLAG_ACTIVE, which is a flag index, when checking if the hardware supports active monitoring. Signed-off-by: Luciano Coelho Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit eca970de7c31574810e80ed780b8a661fc703213 Author: Felix Fietkau Date: Sat Oct 5 14:09:30 2013 +0200 ath9k: fix tx queue scheduling after channel changes commit ec30326ea773900da210c495e14cfeb532550ba2 upstream. Otherwise, if queues are full during a scan, tx scheduling does not resume after switching back to the home channel. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman commit 94579b022349f6e2c991a94154d09af81591f2c4 Author: Johannes Berg Date: Fri Oct 11 15:47:06 2013 +0200 mac80211: fix crash if bitrate calculation goes wrong commit d86aa4f8ca58898ec6a94c0635da20b948171ed7 upstream. If a frame's timestamp is calculated, and the bitrate calculation goes wrong and returns zero, the system will attempt to divide by zero and crash. Catch this case and print the rate information that the driver reported when this happens. Reported-by: Thomas Lindroth Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 0be5e3842206b504deb190e8c325bf775a2b4c48 Author: Felix Fietkau Date: Sun Sep 29 21:39:34 2013 +0200 mac80211: update sta->last_rx on acked tx frames commit 0c5b93290b2f3c7a376567c03ae8d385b0e99851 upstream. When clients are idle for too long, hostapd sends nullfunc frames for probing. When those are acked by the client, the idle time needs to be updated. To make this work (and to avoid unnecessary probing), update sta->last_rx whenever an ACK was received for a tx packet. Only do this if the flag IEEE80211_HW_REPORTS_TX_ACK_STATUS is set. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 3426c0268bf7971cdce1996981a72da1b0948f19 Author: Felix Fietkau Date: Sun Sep 29 21:39:33 2013 +0200 mac80211: use sta_info_get_bss() for nl80211 tx and client probing commit 03bb7f42765ce596604f03d179f3137d7df05bba upstream. This allows calls for clients in AP_VLANs (e.g. for 4-addr) to succeed Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 2dde158543d1a6c9a400bf3cfa13b5f5af6db363 Author: Felix Fietkau Date: Tue Sep 17 11:15:43 2013 +0200 mac80211: drop spoofed packets in ad-hoc mode commit 6329b8d917adc077caa60c2447385554130853a3 upstream. If an Ad-Hoc node receives packets with the Cell ID or its own MAC address as source address, it hits a WARN_ON in sta_info_insert_check() With many packets, this can massively spam the logs. One way that this can easily happen is through having Cisco APs in the area with rouge AP detection and countermeasures enabled. Such Cisco APs will regularly send fake beacons, disassoc and deauth packets that trigger these warnings. To fix this issue, drop such spoofed packets early in the rx path. Reported-by: Thomas Huehn Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 7a18be8d6d721a7197395ad1fe63376c315a09ef Author: Emmanuel Grumbach Date: Mon Sep 16 11:12:07 2013 +0300 mac80211: correctly close cancelled scans commit a754055a1296fcbe6f32de3a5eaca6efb2fd1865 upstream. __ieee80211_scan_completed is called from a worker. This means that the following flow is possible. * driver calls ieee80211_scan_completed * mac80211 cancels the scan (that is already complete) * __ieee80211_scan_completed runs When scan_work will finally run, it will see that the scan hasn't been aborted and might even trigger another scan on another band. This leads to a situation where cfg80211's scan is not done and no further scan can be issued. Fix this by setting a new flag when a HW scan is being cancelled so that no other scan will be triggered. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 4e6787c87c004aa26866b26e3eb44cf0b478ce0d Author: Anjana V Kumar Date: Sat Oct 12 10:59:17 2013 +0800 cgroup: fix to break the while loop in cgroup_attach_task() correctly commit ea84753c98a7ac6b74e530b64c444a912b3835ca upstream. Both Anjana and Eunki reported a stall in the while_each_thread loop in cgroup_attach_task(). It's because, when we attach a single thread to a cgroup, if the cgroup is exiting or is already in that cgroup, we won't break the loop. If the task is already in the cgroup, the bug can lead to another thread being attached to the cgroup unexpectedly: # echo 5207 > tasks # cat tasks 5207 # echo 5207 > tasks # cat tasks 5207 5215 What's worse, if the task to be attached isn't the leader of the thread group, we might never exit the loop, hence cpu stall. Thanks for Oleg's analysis. This bug was introduced by commit 081aa458c38ba576bdd4265fc807fa95b48b9e79 ("cgroup: consolidate cgroup_attach_task() and cgroup_attach_proc()") [ lizf: - fixed the first continue, pointed out by Oleg, - rewrote changelog. ] Reported-by: Eunki Kim Reported-by: Anjana V Kumar Signed-off-by: Anjana V Kumar Signed-off-by: Li Zefan Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit a6eb6d51d889536075ed37f3549888cd5912ae29 Author: David Herrmann Date: Fri Oct 18 16:26:22 2013 +0200 HID: wiimote: add LEGO-wiimote VID commit 86b84167d4e67372376a57ea9955c5d53dae232f upstream. The LEGO-wiimote uses a different VID than the Nintendo ID. The device is technically the same so add the ID. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 2dec45604d70422f6b1b93abf2bcf98c9532b296 Author: Kent Overstreet Date: Tue Oct 22 15:35:50 2013 -0700 bcache: Fixed incorrect order of arguments to bio_alloc_bioset() commit d4eddd42f592a0cf06818fae694a3d271f842e4d upstream. Signed-off-by: Kent Overstreet Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit c1b9c53bba4b87365354cec96fa3ed76a6cae6d9 Author: Dirk Brandewie Date: Tue Oct 15 11:06:14 2013 -0700 cpufreq / intel_pstate: Fix max_perf_pct on resume commit 52e0a509e5d6f902ec26bc2a8bb02b137dc453be upstream. If the system is suspended while max_perf_pct is less than 100 percent or no_turbo set policy->{min,max} will be set incorrectly with scaled values which turn the scaled values into hard limits. References: https://bugzilla.kernel.org/show_bug.cgi?id=61241 Reported-by: Patrick Bartels Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 4349fe191c5f4fc824debccfbc8a54d012038c96 Author: Charles Keepax Date: Mon Oct 14 19:36:47 2013 +0100 cpufreq: s3c64xx: Rename index to driver_data commit 0e8244322b7fc45fd11a1c45f70b6bacddf4986f upstream. The index field of cpufreq_frequency_table has been renamed to driver_data by commit 5070158 (cpufreq: rename index as driver_data in cpufreq_frequency_table). This patch updates the s3c64xx driver to match. Signed-off-by: Charles Keepax Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 593e3eae86d95414bb7c6902676bc9f38013ced6 Author: Russ Anderson Date: Mon Oct 14 11:17:34 2013 -0500 x86: Update UV3 hub revision ID commit dd3c9c4b603c664fedc12facf180db0f1794aafe upstream. The UV3 hub revision ID is different than expected. The first revision was supposed to start at 1 but instead will start at 0. Signed-off-by: Russ Anderson Link: http://lkml.kernel.org/r/20131014161733.GA6274@sgi.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 055950b91a1132641b62f017fe52f7d72e113322 Author: Jan Klos Date: Sun Oct 6 21:08:20 2013 +0200 cifs: Fix inability to write files >2GB to SMB2/3 shares commit 2f6c9479633780ba4a3484bba7eba5a721a5cf20 upstream. When connecting to SMB2/3 shares, maximum file size is set to non-LFS maximum in superblock. This is due to cap_large_files bit being different for SMB1 and SMB2/3 (where it is just an internal flag that is not negotiated and the SMB1 one corresponds to multichannel capability, so maybe LFS works correctly if server sends 0x08 flag) while capabilities are checked always for the SMB1 bit in cifs_read_super(). The patch fixes this by checking for the correct bit according to the protocol version. Signed-off-by: Jan Klos Reviewed-by: Jeff Layton Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit b3d8eec617f5889f7a49c7efe2d8d7d21096d9e3 Author: Sarah Sharp Date: Mon Aug 5 13:36:00 2013 -0700 xhci: Don't enable/disable RWE on bus suspend/resume. commit f217c980ca980e3a645b7485ea5eae9a747f4945 upstream. The RWE bit of the USB 2.0 PORTPMSC register is supposed to enable remote wakeup for devices in the lower power link state L1. It has nothing to do with the device suspend remote wakeup from L2. The RWE bit is designed to be set once (when USB 2.0 LPM is enabled for the port) and cleared only when USB 2.0 LPM is disabled for the port. The xHCI bus suspend method was setting the RWE bit erroneously, and the bus resume method was clearing it. The xHCI 1.0 specification with errata up to Aug 12, 2012 says in section 4.23.5.1.1.1 "Hardware Controlled LPM": "While Hardware USB2 LPM is enabled, software shall not modify the HIRDBESL or RWE fields of the USB2 PORTPMSC register..." If we have previously enabled USB 2.0 LPM for a device, that means when the USB 2.0 bus is resumed, we violate the xHCI specification by clearing RWE. It also means that after a bus resume, the host would think remote wakeup is disabled from L1 for ports with USB 2.0 Link PM enabled, which is not what we want. This patch should be backported to kernels as old as 3.2, that contain the commit 65580b4321eb36f16ae8b5987bfa1bb948fc5112 "xHCI: set USB2 hardware LPM". That was the first kernel that supported USB 2.0 Link PM. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman commit 03f948a5a24dc5d12dbb62b999f785143d92fcc3 Author: Алексей Крамаренко Date: Fri Nov 1 17:26:38 2013 +0400 USB: serial: ftdi_sio: add id for Z3X Box device commit e1466ad5b1aeda303f9282463d55798d2eda218c upstream. Custom VID/PID for Z3X Box device, popular tool for cellphone flashing. Signed-off-by: Alexey E. Kramarenko Signed-off-by: Greg Kroah-Hartman commit 8763fe5320d35c791358e837cbbcc9a4b723d5e3 Author: Oliver Neukum Date: Wed Oct 16 12:26:07 2013 +0200 USB: quirks: add touchscreen that is dazzeled by remote wakeup commit 614ced91fc6fbb5a1cdd12f0f1b6c9197d9f1350 upstream. The device descriptors are messed up after remote wakeup Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman commit d7baca932367b91222e3b1485da85d90a5f144dd Author: Oliver Neukum Date: Mon Oct 14 16:22:40 2013 +0200 USB: quirks.c: add one device that cannot deal with suspension commit 4294bca7b423d1a5aa24307e3d112a04075e3763 upstream. The device is not responsive when resumed, unless it is reset. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman commit 334e9ac1d9bdb3cd02ddc74945d5c4293550615e Author: Fangxiaozhi (Franko) Date: Fri Oct 11 03:48:21 2013 +0000 USB: support new huawei devices in option.c commit d544db293a44a2a3b09feab7dbd59668b692de71 upstream. Add new supporting declarations to option.c, to support Huawei new devices with new bInterfaceSubClass value. Signed-off-by: fangxiaozhi Signed-off-by: Greg Kroah-Hartman commit 3ee7ef780ea3605dd317c6702b50d4a818e64a63 Author: Oliver Neukum Date: Mon Oct 14 15:24:55 2013 +0200 usb-storage: add quirk for mandatory READ_CAPACITY_16 commit 32c37fc30c52508711ea6a108cfd5855b8a07176 upstream. Some USB drive enclosures do not correctly report an overflow condition if they hold a drive with a capacity over 2TB and are confronted with a READ_CAPACITY_10. They answer with their capacity modulo 2TB. The generic layer cannot cope with that. It must be told to use READ_CAPACITY_16 from the beginning. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman commit a368a29579b50aa3d78d8b2d9737dd5e32f55a43 Author: Sebastian Andrzej Siewior Date: Fri Oct 11 10:38:13 2013 +0200 usb: musb: start musb on the udc side, too commit 001dd84a92a25f8f2bad7d26df8bdb0362302c07 upstream. I have am335x-evm with one port running in OTG mode. Since commit fe4cb09 ("usb: musb: gadget: remove hcd initialization") the loaded gadget does non pop up on the host. All I see is |usb 4-5: new high-speed USB device number 52 using ehci-pci |usb 4-5: device descriptor read/64, error -110 Since a later commit 2cc65fe ("usb: musb: add musb_host_setup() and musb_host_cleanup()) the gadget shows up on the host again but only in OTG mode (because we have the host init code running). It does not work in device only mode. If running in OTG mode and the gadget is removed and added back (rmmod followed by modprobe of a gadget) then the same error is pops up on the host side. This patch ensures that the gadget side also executes musb_start() which puts the chip in "connect accept" mode. With this change the device works in OTG & device mode and the gadget can be added & removed multiple times. A device (if musb is in OTG mode acting as a host) is only recognized if it is attached during module load (musb_hdrc module). After the device unplugged and plugged again the host does not recognize it. We get a buch of errors if musb running in OTG mode, attached to a host and no gadget is loaded. Bah. This is one step forward. Host & device only mode should work. I will look at OTG later. I looked at this before commit fe4cb09 and OTG wasn't working there perfectly so I am not sure that it is a regression :) Cc: Daniel Mack Cc: Peter Korsgaard Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman