ChangeSet 1.1371.759.25, 2004/04/26 16:08:12-07:00, tejohnson@yahoo.com
[PATCH] USB: mtouchusb update for 2.6.6-rc2
The attached patch for the 3M Touch Systems Capacitive controller.
Quick list of changes:
* Changed reset from standard USB dev reset to vendor reset
* Changed data sent to host from compensated to raw coordinates
* Eliminated vendor/product module params
* Performed multiple successfull tests with an EXII-5010UC
The changes are primarily due to comments from Vojtech Pavlik, as well
as making the newer EXII-50XXUC controllers work.
Thanks to 3M Touch Systems for sending me some new controllers to test with!
An updated HOWTO is also available at:
http://groomlakelabs.com/grandamp/code/microtouch/Linux-Input-USB-Touchscreen-HowTo.txt
Documentation/usb/mtouchusb.txt | 91 +++++++++++++++-------------------
drivers/usb/input/mtouchusb.c | 107 +++++++++++++---------------------------
2 files changed, 77 insertions(+), 121 deletions(-)
diff -Nru a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.txt
--- a/Documentation/usb/mtouchusb.txt Fri May 14 15:32:51 2004
+++ b/Documentation/usb/mtouchusb.txt Fri May 14 15:32:51 2004
@@ -1,26 +1,38 @@
CHANGES
-- Created based off of scanner & INSTALL from the original touchscreen
+- 0.3 - Created based off of scanner & INSTALL from the original touchscreen
driver on freshmeat (http://freshmeat.net/projects/3mtouchscreendriver)
- Amended for linux-2.4.18, then 2.4.19
-- Complete rewrite using Linux Input in 2.6.3
+- 0.5 - Complete rewrite using Linux Input in 2.6.3
Unfortunately no calibration support at this time
+- 1.4 - Multiple changes to support the EXII 5000UC and house cleaning
+ Changed reset from standard USB dev reset to vendor reset
+ Changed data sent to host from compensated to raw coordinates
+ Eliminated vendor/product module params
+ Performed multiple successfull tests with an EXII-5010UC
-DRIVER NOTES:
+SUPPORTED HARDWARE:
+
+ All controllers have the Vendor: 0x0596 & Product: 0x0001
-Installation is simple, you only need to add Linux Input, Linux USB, and the
-driver to the kernel. The driver can also be optionally built as a module.
-If you have another MicroTouch device that you wish to experiment with
-or try using this driver with, but the Vendor and Product ID's are not
-coded in, don't despair. If the driver was compiled as a module, you can
-pass options to the driver. Simply try:
+ Controller Description Part Number
+ ------------------------------------------------------
- /sbin/modprobe mtouchusb vendor=0x#### product=0x****
+ USB Capacitive - Pearl Case 14-205 (Discontinued)
+ USB Capacitive - Black Case 14-124 (Discontinued)
+ USB Capacitive - No Case 14-206 (Discontinued)
+
+ USB Capacitive - Pearl Case EXII-5010UC
+ USB Capacitive - Black Case EXII-5030UC
+ USB Capacitive - No Case EXII-5050UC
+
+DRIVER NOTES:
-If it works, send me the iVendor & iProduct (or a patch) and I will add...
+Installation is simple, you only need to add Linux Input, Linux USB, and the
+driver to the kernel. The driver can also be optionally built as a module.
This driver appears to be one of possible 2 Linux USB Input Touchscreen
drivers. Although 3M produces a binary only driver available for
@@ -28,53 +40,28 @@
touchscreen for embedded apps using QTEmbedded, DirectFB, etc. So I feel the
logical choice is to use Linux Imput.
-A little info about the MicroTouch USB controller (14-206):
-
-Y is inverted, and the device has a total possible resolution of 0 - 65535.
-
-Y is inverted by the driver by:
+Currently there is no way to calibrate the device via this driver. Even if
+the device could be calibrated, the driver pulls to raw coordinate data from
+the controller. This means calibration must be performed within the
+userspace.
+
+The controller screen resolution is now 0 to 16384 for both X and Y reporting
+the raw touch data. This is the same for the old and new capacitive USB
+controllers.
+
+Perhaps at some point an abstract function will be placed into evdev so
+generic functions like calibrations, resets, and vendor information can be
+requested from the userspace (And the drivers would handle the vendor specific
+tasks).
- input.absmin[ABS_Y] = MTOUCHUSB_MAX_YC;
- input.absmax[ABS_Y] = MTOUCHUSB_MIN_YC;
-
-absmin & absmax are also used to scale the data, sine it is rather high
-resolution.
-
- ---------------touch screen area-----------------
- I MicroTouch (xmax,ymax) @I
- I X I
- I ########visible monitor area############## I
- I #@ (xmin,ymin) # I
- I # # I
- I # # I
- I # # I
- I # # I
- I # # I
- I Y # # I
- I # # I
- I # # I
- I # # I
- I # # I
- I # # I
- I # (xmax,ymax) @# I
- I ########################################## I
- I I
- I@ MicroTouch (xmin,ymin) I
- -------------------------------------------------
-
-Currently there is no way to calibrate the device via this driver. Perhaps
-at some point an abstract function will be placed into evdev so generic
-functions like calibrations, resets, and vendor information can be requested
-(And the drivers would handle the vendor specific tasks).
-
-ADDITIONAL INFORMATION/UPDATES:
+ADDITIONAL INFORMATION/UPDATES/X CONFIGURATION EXAMPLE:
http://groomlakelabs.com/grandamp/code/microtouch/
TODO:
Implement a control urb again to handle requests to and from the device
-such as calibration, etc.
+such as calibration, etc once/if it becomes available.
DISCLAMER:
@@ -83,3 +70,7 @@
http://www.3m.com/3MTouchSystems/downloads/
+THANKS:
+
+A huge thank you to 3M Touch Systems for the EXII-5010UC controllers for
+testing!
diff -Nru a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c
--- a/drivers/usb/input/mtouchusb.c Fri May 14 15:32:51 2004
+++ b/drivers/usb/input/mtouchusb.c Fri May 14 15:32:51 2004
@@ -28,6 +28,12 @@
* Complete rewrite using Linux Input in 2.6.3
* Unfortunately no calibration support at this time
*
+ * 1.4 04/25/2004 (TEJ) tejohnson@yahoo.com
+ * Changed reset from standard USB dev reset to vendor reset
+ * Changed data sent to host from compensated to raw coordinates
+ * Eliminated vendor/product module params
+ * Performed multiple successfull tests with an EXII-5010UC
+ *
*****************************************************************************/
#include <linux/config.h>
@@ -45,25 +51,28 @@
#include <linux/init.h>
#include <linux/usb.h>
-#define MTOUCHUSB_MIN_XC 0xc8
-#define MTOUCHUSB_MAX_XC 0xff78
+#define MTOUCHUSB_MIN_XC 0x0
+#define MTOUCHUSB_MAX_XC 0x4000
#define MTOUCHUSB_XC_FUZZ 0x0
#define MTOUCHUSB_XC_FLAT 0x0
#define MTOUCHUSB_MIN_YC 0x0
-#define MTOUCHUSB_MAX_YC 0xff78
+#define MTOUCHUSB_MAX_YC 0x4000
#define MTOUCHUSB_YC_FUZZ 0x0
#define MTOUCHUSB_YC_FLAT 0x0
-#define MTOUCHUSB_ASYC_REPORT 1
-#define MTOUCHUSB_REPORT_SIZE_DATA 11
+
+#define MTOUCHUSB_ASYNC_REPORT 1
+#define MTOUCHUSB_RESET 7
+#define MTOUCHUSB_REPORT_DATA_SIZE 11
#define MTOUCHUSB_REQ_CTRLLR_ID 10
-#define MTOUCHUSB_GET_XC(data) (data[4]<<8 | data[3])
-#define MTOUCHUSB_GET_YC(data) (data[6]<<8 | data[5])
+#define MTOUCHUSB_GET_XC(data) (data[8]<<8 | data[7])
+#define MTOUCHUSB_GET_YC(data) (data[10]<<8 | data[9])
#define MTOUCHUSB_GET_TOUCHED(data) ((data[2] & 0x40) ? 1:0)
-#define DRIVER_VERSION "v0.1"
+#define DRIVER_VERSION "v1.4"
#define DRIVER_AUTHOR "Todd E. Johnson, tejohnson@yahoo.com"
-#define DRIVER_DESC "Microtouch USB HID Touchscreen Driver"
+#define DRIVER_DESC "3M USB Touchscreen Driver"
+#define DRIVER_LICENSE "GPL"
struct mtouch_usb {
unsigned char *data;
@@ -76,11 +85,9 @@
char phys[64];
};
-static __s32 vendor=-1, product=-1;
-
static struct usb_device_id mtouchusb_devices [] = {
- { USB_DEVICE(0x0596, 0x0001) }, /* 3M (Formerly MicroTouch) 14-206 */
- { } /* Terminating entry */
+ { USB_DEVICE(0x0596, 0x0001) },
+ { }
};
static void mtouchusb_irq(struct urb *urb, struct pt_regs *regs)
@@ -153,7 +160,7 @@
{
dbg("%s - called", __FUNCTION__);
- mtouch->data = usb_buffer_alloc(udev, MTOUCHUSB_REPORT_SIZE_DATA,
+ mtouch->data = usb_buffer_alloc(udev, MTOUCHUSB_REPORT_DATA_SIZE,
SLAB_ATOMIC, &mtouch->data_dma);
if (!mtouch->data)
@@ -167,7 +174,7 @@
dbg("%s - called", __FUNCTION__);
if (mtouch->data)
- usb_buffer_free(udev, MTOUCHUSB_REPORT_SIZE_DATA,
+ usb_buffer_free(udev, MTOUCHUSB_REPORT_DATA_SIZE,
mtouch->data, mtouch->data_dma);
}
@@ -180,41 +187,8 @@
char path[64];
char *buf;
int nRet;
- int ix;
- char valid_device = 0;
dbg("%s - called", __FUNCTION__);
- if (vendor != -1 && product != -1) {
- info("%s - User specified USB Touch -- Vend:Prod - %x:%x",
- __FUNCTION__, vendor, product);
- }
-
- for (ix = 0; ix < sizeof (mtouchusb_devices) /
- sizeof (struct usb_device_id); ix++) {
- if ((udev->descriptor.idVendor ==
- mtouchusb_devices [ix].idVendor) &&
- (udev->descriptor.idProduct ==
- mtouchusb_devices [ix].idProduct)) {
- valid_device = 1;
- break;
- }
- }
-
- if (udev->descriptor.idVendor == vendor &&
- udev->descriptor.idProduct == product) { /* User specified */
- valid_device = 1;
- }
-
- if (!valid_device) {
- err("%s - No valid device!", __FUNCTION__);
- return -EIO;
- }
-
- if (udev->descriptor.bNumConfigurations != 1) {
- err("%s - Only one device configuration is supported.",
- __FUNCTION__);
- return -EIO;
- }
dbg("%s - setting interface", __FUNCTION__);
interface = intf->cur_altsetting;
@@ -222,11 +196,6 @@
dbg("%s - setting endpoint", __FUNCTION__);
endpoint = &interface->endpoint[0].desc;
- if (interface->desc.bNumEndpoints != 1) {
- err("%s - Only one endpoint is supported.", __FUNCTION__);
- return -EIO;
- }
-
if (!(mtouch = kmalloc (sizeof (struct mtouch_usb), GFP_KERNEL))) {
err("%s - Out of memory.", __FUNCTION__);
return -ENOMEM;
@@ -266,8 +235,8 @@
mtouch->input.absmax[ABS_X] = MTOUCHUSB_MAX_XC;
mtouch->input.absfuzz[ABS_X] = MTOUCHUSB_XC_FUZZ;
mtouch->input.absflat[ABS_X] = MTOUCHUSB_XC_FLAT;
- mtouch->input.absmin[ABS_Y] = MTOUCHUSB_MAX_YC;
- mtouch->input.absmax[ABS_Y] = MTOUCHUSB_MIN_YC;
+ mtouch->input.absmin[ABS_Y] = MTOUCHUSB_MIN_YC;
+ mtouch->input.absmax[ABS_Y] = MTOUCHUSB_MAX_YC;
mtouch->input.absfuzz[ABS_Y] = MTOUCHUSB_YC_FUZZ;
mtouch->input.absflat[ABS_Y] = MTOUCHUSB_YC_FLAT;
@@ -290,15 +259,15 @@
kfree(buf);
nRet = usb_control_msg(mtouch->udev,
- usb_rcvctrlpipe(udev, 0x80),
- USB_REQ_GET_CONFIGURATION,
- USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ usb_rcvctrlpipe(udev, 0),
+ MTOUCHUSB_RESET,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 1,
0,
- 0x81,
NULL,
0,
HZ * USB_CTRL_SET_TIMEOUT);
- dbg("%s - usb_control_msg - USB_REQ_GET_CONFIGURATION - bytes|err: %d",
+ dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
__FUNCTION__, nRet);
dbg("%s - usb_alloc_urb: mtouch->irq", __FUNCTION__);
@@ -315,7 +284,7 @@
mtouch->udev,
usb_rcvintpipe(mtouch->udev, 0x81),
mtouch->data,
- MTOUCHUSB_REPORT_SIZE_DATA,
+ MTOUCHUSB_REPORT_DATA_SIZE,
mtouchusb_irq,
mtouch,
endpoint->bInterval);
@@ -324,15 +293,15 @@
input_register_device(&mtouch->input);
nRet = usb_control_msg(mtouch->udev,
- usb_rcvctrlpipe(udev, 0x80),
- MTOUCHUSB_ASYC_REPORT,
+ usb_rcvctrlpipe(udev, 0),
+ MTOUCHUSB_ASYNC_REPORT,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- MTOUCHUSB_ASYC_REPORT,
- MTOUCHUSB_ASYC_REPORT,
+ 1,
+ 1,
NULL,
0,
HZ * USB_CTRL_SET_TIMEOUT);
- dbg("%s - usb_control_msg - MTOUCHUSB_ASYC_REPORT - bytes|err: %d",
+ dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
__FUNCTION__, nRet);
printk(KERN_INFO "input: %s on %s\n", mtouch->name, path);
@@ -383,9 +352,3 @@
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");
-MODULE_PARM(vendor, "i");
-MODULE_PARM_DESC(vendor, "User specified USB idVendor");
-MODULE_PARM(product, "i");
-MODULE_PARM_DESC(product, "User specified USB idProduct");
-
-