u-boot-tools-2021.10-150600.11.3.1<>,Vtgop9|C~1EF@\(b`'e}uf'ωCn70=V(G^^IHi8=rZ|GcY9K+xK1[^\K)& fVs~du'?LLC#->0hӥi&6g2? QNY. c{*`o{@0\80HY`!BLvIA˻)ƞ3DlXxS*i1 A>^dk 9F,?7z >>JH?J8d % C $=^k        @      ; r ((8 U9 `U:*UF>G> H> I? X? Y?\?@ ]?l ^?b@>c@dAneAsfAvlAxuA vA wH xH yH@zIIIIJ4Cu-boot-tools2021.10150600.11.3.1Tools for the U-Boot FirmwareDas U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. This package contains: mkimage- a tool that creates kernel bootable images for U-Boot.goh04-ch1dSUSE Linux Enterprise 15SUSE LLC GPL-2.0-onlyhttps://www.suse.com/System/Boothttp://www.denx.de/wiki/U-Bootlinuxx86_64tts(y8F zA큤gngngngngngngngngoa[&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-boot-2021.10-150600.11.3.1.src.rpmu-boot-toolsu-boot-tools(x86-64)@@@@@@@@@@@@    libc.so.6()(64bit)libc.so.6(GLIBC_2.14)(64bit)libc.so.6(GLIBC_2.17)(64bit)libc.so.6(GLIBC_2.2.5)(64bit)libc.so.6(GLIBC_2.3)(64bit)libc.so.6(GLIBC_2.33)(64bit)libc.so.6(GLIBC_2.34)(64bit)libc.so.6(GLIBC_2.38)(64bit)libcrypto.so.3()(64bit)libcrypto.so.3(OPENSSL_3.0.0)(64bit)libssl.so.3()(64bit)libssl.so.3(OPENSSL_3.0.0)(64bit)rpmlib(CompressedFileNames)rpmlib(FileDigests)rpmlib(PayloadFilesHavePrefix)rpmlib(PayloadIsXz)3.0.4-14.6.0-14.0-15.2-14.14.3g@g@bbޅbޅbb@a7ara\>@aUaSaSaC1aA@a $@a /````@`@`}p`pA`lM@`lM@`lM@`Q@`@`@`<@`<@`+`+`+`*b@`%@`U`U``x@__@___@_v@___ _@_E@_~@_|\@_u_ts@_s!_s!_d@_/@_^?@^>@^@^@^@^^^0^}^s^^O@^J@^2@^1s^(9@^g@^g@^r]]}@]@]@]@]*]*]*]@]@]ʞ]@]5@]@]@]@]]z@]z@]o@]]2@]N]5@]5@]0_@]%@]%@]%@]$]$]/@]]:\@\@\\@\@\@\\@\@\@\~d\~d\eX@\eX@\P@@\=@\4\'@\\\l@[=@[[T@[_[[0[ٙ@[$@[@[@[@[@[@[ug@[qr[O+[O+[D[;e@[3|@[*A[d@[[ @[ L@[@[Z4@Z4@ZZ@Z@Z@Z@ZZJ@ZUZZZ`@Z`@ZZZZ_@Z@Zp^@Z_:Z_:ZS]@Z8@Z*~Z[@Z }Z Z@YeYY@Y@YYp@Y*@YY@YY@Ycl@YK@YJ_Y:Y]YtX@XXXQ@XXh@X@X@X"@X@X@X@XXf@X}@Xv@Xs{@XoXn5@XWX*X@XXkX@Ww@WSWWG@W@WiW@W9WE@W!Wq@Wq@WUeWUeWQq@W 0011-serial-bcm283x_mu-Detect-disabled-s.patch - Add SMBIOS table on ARM (bsc#989509) * Patches added: 0012-x86-Move-table-csum-into-separate-h.patch 0013-x86-Move-smbios-generation-into-arc.patch 0014-efi_loader-Expose-efi_install_confi.patch 0015-smbios-Allow-compilation-on-64bit-s.patch 0016-smbios-Expose-in-efi_loader-as-tabl.patch 0017-efi_loader-Fix-efi_install_configur.patch 0018-smbios-Provide-serial-number.patch- Use deterministic build date by setting DATE_SOURCE_EPOCH- Add dynamic detection of rpi3 uart (bsc#989511) - Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed * Patches added: 0010-serial-bcm283x_mu-Detect-disabled-s.patch- Updated to v2016.07 * Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed * Patches dropped (upstreamed): 0004-video-ipu-Fix-build-with-hard-float.patch 0005-efi_loader-Clean-up-system-table-on.patch 0006-efi_loader-gop-Don-t-expose-fb-addr.patch 0009-arm-Introduce-setjmp-longjmp.patch 0010-efi_loader-Add-exit-support.patch 0011-efi_loader-Add-DM_VIDEO-support.patch 0015-arm-Fix-setjmp.patch * Patches rebased: 0007-efi_loader-Allow-boards-to-implemen.patch -> 0004-efi_loader-Allow-boards-to-implemen.patch 0008-ARM-bcm283x-Implement-EFI-RTS-reset.patch -> 0005-ARM-bcm283x-Implement-EFI-RTS-reset.patch 0012-efi_loader-gop-Expose-fb-when-32bpp.patch -> 0006-efi_loader-gop-Expose-fb-when-32bpp.patch 0013-bcm2835-video-Map-frame-buffer-as-3.patch -> 0007-bcm2835-video-Map-frame-buffer-as-3.patch 0014-bcm2835-Reserve-the-spin-table-in-e.patch -> 0008-bcm2835-Reserve-the-spin-table-in-e.patch - Revert an ARMv8 breakage from v2016.07 (backport from master) 0009-Revert-armv8-Enable-CPUECTLR.SMPEN-.patch - Add dragonboard410c, odroid-c2, pine64_plus- Enable SUNXI_SPL for orangepi_pc- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed * Patches added: 0015-arm-Fix-setjmp.patch - Add update_git.sh to source file list- Add efifb support for RPi - Fix spin table spill on Rpi - Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed * Patches added: 0011-efi_loader-Add-DM_VIDEO-support.patch 0012-efi_loader-gop-Expose-fb-when-32bpp.patch 0013-bcm2835-video-Map-frame-buffer-as-3.patch 0014-bcm2835-Reserve-the-spin-table-in-e.patch- Add RTS reboot for RPi - Add EFI exit support - Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed * Patches added: 0007-efi_loader-Allow-boards-to-implemen.patch 0008-ARM-bcm283x-Implement-EFI-RTS-reset.patch 0009-arm-Introduce-setjmp-longjmp.patch 0010-efi_loader-Add-exit-support.patch- Disable EFI GOP fb_addr, so Linux doesn't use it - Move to git based patch queue workflow - Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed * Patches dropped: 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch 0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch 0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch * Patches added: 0001-XXX-openSUSE-XXX-Load-dtb-from-part.patch 0002-XXX-openSUSE-XXX-omap3-Move-to-dist.patch 0003-Revert-Revert-omap3-Use-raw-SPL-by-.patch 0004-video-ipu-Fix-build-with-hard-float.patch 0005-efi_loader-Clean-up-system-table-on.patch 0006-efi_loader-gop-Don-t-expose-fb-addr.patch- Fix rpi3 installation location- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch to fix build on iMX boards (with hard-float toolchains)- Update to 2016.05 - Remove upstreamed patch: * 0003-exynos-Set-CNTFRQ.patch- Package Marvell SPL for ClearFog - Tidy package summaries and descriptions * Fix spelling of U-Boot * Don't assume ARM- Update to 2016.05-rc3 - Removed patches: * 0004-iso-Make-little-endian-and-64bit-safe.patch * 0005-iso-Start-with-partition-1.patch * 0006-iso-Allow-512-byte-sector-size.patch * 0007-efi_loader-Split-drive-add-into-function.patch * 0008-efi_loader-Add-el-torito-support.patch * 0009-efi_loader-Pass-file-path-to-payload.patch * 0010-efi_loader-Increase-path-string-to-32-characters.patch * 0011-distro-Enable-iso-partition-code.patch * 0012-efi_loader-Use-system-fdt-as-fallback.patch * 0013-efi_loader-Put-fdt-into-convenient-location.patch * 0014-efi_loader-Expose-ascending-efi-memory-map.patch * 0015-efi_loader-Always-flush-in-cache-line-size-granulari.patch * 0016-efi_loader-Handle-memory-overflows.patch * 0017-ARM-rpi-fix-64-bit-CONFIG_SYS_TEXT_BASE.patch- Add patch to fix RPi3 aarch64 mode with recent firmware * 0017-ARM-rpi-fix-64-bit-CONFIG_SYS_TEXT_BASE.patch- Move patch queue to https://github.com/openSUSE/u-boot.git tumbleweed - Removed old patches: * 0001-iso-Make-little-endian-and-64bit-safe.patch * 0002-iso-Start-with-partition-1.patch * 0003-iso-Allow-512-byte-sector-size.patch * 0004-efi_loader-Split-drive-add-into-function.patch * 0005-efi_loader-Add-el-torito-support.patch * 0006-efi_loader-Pass-file-path-to-payload.patch * 0007-efi_loader-Increase-path-string-to-32-characters.patch * 0008-distro-Enable-iso-partition-code.patch * 0009-efi_loader-Use-system-fdt-as-fallback.patch * 0010-efi_loader-Put-fdt-into-convenient-location.patch * 0011-efi_loader-Expose-ascending-efi-memory-map.patch * 0012-efi_loader-Always-flush-in-cache-line-size-granulari.patch * u-boot-exynos.patch * efi-default-env.patch * omap3-Move-to-distro-bootcmd.patch - Added new patches: * 0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch * 0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch * 0003-exynos-Set-CNTFRQ.patch * 0004-iso-Make-little-endian-and-64bit-safe.patch * 0005-iso-Start-with-partition-1.patch * 0006-iso-Allow-512-byte-sector-size.patch * 0007-efi_loader-Split-drive-add-into-function.patch * 0008-efi_loader-Add-el-torito-support.patch * 0009-efi_loader-Pass-file-path-to-payload.patch * 0010-efi_loader-Increase-path-string-to-32-characters.patch * 0011-distro-Enable-iso-partition-code.patch * 0012-efi_loader-Use-system-fdt-as-fallback.patch * 0013-efi_loader-Put-fdt-into-convenient-location.patch * 0014-efi_loader-Expose-ascending-efi-memory-map.patch * 0015-efi_loader-Always-flush-in-cache-line-size-granulari.patch - Add patch to fix Jetson TK1 * 0016-efi_loader-Handle-memory-overflows.patch- Use released source archive instead of manually built archive- Update to 2016.05-rc1 - Remove upstreamed patches: * efi.patch * efi2.patch * efi_loader-Call-fdt-preparation-functions.patch * efi_loader-Pass-proper-device-path-in-on-boot.patch * efi_loader-Provide-icache-flush-stub.patch * efi-map-fdt-as-reserved.patch * rpi3.patch - Add EFI fixes and iso boot backports: * 0001-iso-Make-little-endian-and-64bit-safe.patch * 0002-iso-Start-with-partition-1.patch * 0003-iso-Allow-512-byte-sector-size.patch * 0004-efi_loader-Split-drive-add-into-function.patch * 0005-efi_loader-Add-el-torito-support.patch * 0006-efi_loader-Pass-file-path-to-payload.patch * 0007-efi_loader-Increase-path-string-to-32-characters.patch * 0008-distro-Enable-iso-partition-code.patch * 0009-efi_loader-Use-system-fdt-as-fallback.patch * 0010-efi_loader-Put-fdt-into-convenient-location.patch * 0011-efi_loader-Expose-ascending-efi-memory-map.patch * 0012-efi_loader-Always-flush-in-cache-line-size-granulari.patch- Package .img for firefly-rk3288 - Package firefly-rk3288 SPL images. Generate them here so that we notice early if the size constraints are ever again not met.- Package spl/u-boot-spl for new tegra-uboot-flasher-scripts- Add clearfog- Update to 2016.03 - Remove upstreamed patch: * omap3-Use-raw-SPL-by-default-for-mmc1.patch- add support for Raspberry Pi 3 (rpi3.patch)- Fix missing 0-terminator in efi patch, breaking boot.scr boot- Non-free licensed Marvell code has long been removed. Drop obsolete drop-marvell.patch (bsc#773824) - Fix indentation of Patch6 in u-boot.spec.in- EFI: Map fdt as reserved * efi-map-fdt-as-reserved.patch- Fix OMAP3 boards to load u-boot from raw sector offset * omap3-Use-raw-SPL-by-default-for-mmc1.patch- Allow grub2 to find its config * efi_loader-Pass-proper-device-path-in-on-boot.patch - Fix Raspberry Pi 1 build * efi_loader-Provide-icache-flush-stub.patch- Update to 2016.03-rc3 - Remove upstreamed patches: * 0001-spl-if-MMCSD_MODE_RAW-fails-try-MMCSD_MODE_FS-if-ava.patch- Move omap3 to distro bootcmd (to enable efi boot on beagle-xm) * omap3-Move-to-distro-bootcmd.patch - Add EFI patch to support FDT fixups (patches in RAM size) * efi_loader-Call-fdt-preparation-functions.patch- Patch the default u-boot env to search for dtb in /boot at part 2 * efi-default-env.patch- Use $fdtfile rather than $fdt_name everywhere: * efi2.patch- Add EFI support about to move upstream: * efi.patch- Update to 2016.03-rc2 - Remove upstreamed patches: * U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch * 0001-udoo-use-load-instead-of-fatload.patch - Refresh drop-marvell.patch - Remove dropped doc from file list: doc/README.Modem- Add a patch to fix boot on partition when raw boot mode is also available: * 0001-spl-if-MMCSD_MODE_RAW-fails-try-MMCSD_MODE_FS-if-ava.patch- Add am335x_boneblack- Enable Hyundai_A7HD, superseding :Contrib:sunxi package- Adjust installation path for qemu-ppce500 to replace qemu-ppc's * Pull in qemu (not qemu-ppc) for directory ownership- Add Jetson TX1 board (p2371-2180) - Fix indentation of last Patch line in .spec.in to match .spec- Add patch to fix exynos armv7 kvm support * adds u-boot-exynos.patch- Prepare for non-/boot installation directories * For /boot/vc pull in raspberrypi-firmware package- Add udoo (dual and quad) boards * adds 0001-udoo-use-load-instead-of-fatload.patch- Add qemu-ppce500, to replace u-boot.e500 blob in qemu package * Override CROSS_COMPILE variable to use native gcc- Update to 2016.01- Update to 2016.01-rc4- Update to 2016.01-rc3- Suppress stripping debug info - it affects u-boot-jetson-tk1 - Install rpi and rpi2 binaries to /boot/vc- Backport U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch to fix bootdelay on Beaglebone board- Add orangepi_pc board- Add support to am57xx_evm (beagle_x15 with u-boot DT)- Update to 2016.01-rc2: - Rename 'beagle_x15' to 'am57xx_evm_nodt' to follow upstream - Remove upstreamed patch: * U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch- Update to 2016.01-rc1 - Remove upstreamed patches: * 0001-configs-Use-config_distro_defaults.h-in-ti_armv7_com.patch * 0001-mx6cuboxi-use-load-instead-of-fatload.patch (no more needed) * U-Boot-image.c-Fix-non-Android-booting-with-ramdisk-and-or-device-tree.patch - Update drop-marvell.patch- Backport 0001-configs-Use-config_distro_defaults.h-in-ti_armv7_com.patch- 0001-mx6cuboxi-use-load-instead-of-fatload.patch for cubox-i use load instead of fatload- Fix am335x booting * U-Boot-image.c-Fix-non-Android-booting-with-ramdisk-and-or-device-tree.patch- Add Beagle x15 support - Fix build for Beagle x15: * U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch- Update to 2015.10 - Remove upstreamed patches: * 0001-odroid-replace-fatload-with-load-to-be-able-to-use-E.patch * 0002-odroid-Add-boot-script-boot.scr-support.patch- Update to 2015.10-rc5 - Remove upstreamed patch: * arndale-apply-cortex-a15-erratas.patch- Add boot script support to odroid board: * 0001-odroid-replace-fatload-with-load-to-be-able-to-use-E.patch * 0002-odroid-Add-boot-script-boot.scr-support.patch- Add spring and firefly-rk3288 for armv7hl * Break overly long armv7_boards line in pre_checkin.sh * Clean up case'ing of defconfigs to avoid excessive wildcards - Prepare for adding qemu-ppce500 for ppc * Allow for more than two exclusive architectures (cleanup)- add arndale-apply-cortex-a15-erratas.patch- Update to 2015.10-rc4 - Update drop-marvell.patch- Use u-boot-2015.10-rc3.tar.bz2 package provided on FTP instead of packaging it manually.- Update to 2015.10-rc3- Add odroid and odroid-xu3- Update to 2015.10-rc2 - Remove upstreamed patch: * jetson-tk1-gpu-1.patch * jetson-tk1-gpu-2.patch- Update to 2015.10-rc1 - Remove upstreamed patch: * mx53loco-bootscr.patch - Update patches: * jetson-tk1-gpu-1.patch * jetson-tk1-gpu-2.patch- add mx6cuboxi- jetson-tk1-gpu-1.patch, jetson-tk1-gpu-2.patch: Enable the Tegra124 GPU device tree node- Add u-boot-jetson-tk1- Add u-boot-merriia80optimus- Update to 2015.07- Update to 2015.07-rc3 - Remove upstreamed patches: * enable_spl_ext_support_for_ti_armv7.patch * fix_slow_mmc_on_rpi.patch- Add fix_slow_mmc_on_rpi.patch to speed up MMC load on RPi - Rework patches (to be upstreamable): * enable_spl_ext_support_for_ti_armv7.patch * mx53loco-bootscr.patch - Remove fix_beagle_spl_build.patch- Update to 2015.07-rc2 - Update drop-marvell.patch- Update to 2015.07-rc1: - Update drop-marvell.patch - Remove no more needed add_snow_usb_boot.patch- adjust copyright headers- update to 2015.04 - Remove upstreamed patch: 0001-Exynos-Clock-Fix-exynos5_get_periph_rate-for-I2C.patch - Follow upstream board rename colibri_t20_iris => colibri_t20- Added support for A13-OLinuXino, A13-OLinuXino-MICRO, A20-OLinuXino-MICRO and A20-OLinuXino-LIME from www.olimex.com- Remove u-boot-vexpressaemv8a (dropped upstream and we now use EFI)- update to 2015.04-rc5- update to 2015.04-rc4- Add 0001-Exynos-Clock-Fix-exynos5_get_periph_rate-for-I2C.patch to fix keyboard on Chromebook- update to 2015.04-rc3 - update patch: drop-marvell.patch- Update add_snow_usb_boot.patch to boot on USB2 instead of USB3- Remove unneeded fix_snow_config.patch- Add rpi2 armv7 board- Update to 2015.04-rc2- Update to 2015.04-rc1 * Remove upstreamed patch pcm051-bootscr.patch * Remove no more used patch fix_bootpart_snow_only.patch (now u-boot scan all known partitions, so no need to set a different boot partition)- Enable pcm051rev3 for Phytec Wega board * Add pcm051-bootscr.patch: add bootscript support (upstreamed in 2015.04-rc1)- Update to 2015.01: * Drop upstreamed patches: - 0001-spl-mmc-Fix-raw-boot-mode-related-to-commit.patch - fix_sata.patch * Update partially upstreamed mx53loco-bootscr.patch- Backport SPL MMC raw boot mode fix: * 0001-spl-mmc-Fix-raw-boot-mode-related-to-commit.patch- Added support for A20-OLinuXIno-LIME2 and A10-OLinuXino-LIME from www.olimex.com- Rename XLOADER to OMAP_SPL in pre_checkin.sh and u-boot.spec.in- Update to 2015.01-rc3 * Drop upstreamed/unneeded patches: - 0001-exynos-Enable-config_distro_defaults.h.patch - 0002-exynos5-Use-config_distro_bootcmd.h.patch - boot_mode_fallback.patch - fix_snow_usb_support - fix_spl_ext.patch - fix_arm_hf_toolchain.patch - origen-ext2.patch * Update patch: - fix_snow_config.patch * Follow upstream: rpi_b config renamed to rpi- Update snow (chromebook) * Update patch: - fix_snow_config.patch patch * Add patches: - add_snow_usb_boot.patch to be able to boot from USB0 - fix_bootpart_snow_only.patch to boot on partition #2 (snow only!) * Backport patches: - fix_snow_usb_support.patch to fix USB on snow - 0001-exynos-Enable-config_distro_defaults.h.patch - 0002-exynos5-Use-config_distro_bootcmd.h.patch * Drop unneeded/obsolete patches: - fix_exynos5_text_base.patch - fix_snow_extra_env_settings.patch- Add Bananapi initial support- Update to 2015.01-rc2 - Update patch fix_omap_boot_mode.patch to be upstreamable and rename it to boot_mode_fallback.patch - Drop obsolete patch: arndale.patch - Add patches: * fix_arm_hf_toolchain.patch: fix build with hard float toolchain * fix_spl_ext.patch: fix SPL EXT error checks * fix_sata.patch: fix sata support and fix also mx53loco build- Fix mx53loco-bootscr.patch- Add u-boot-with-sunxi-spl.bin for sunxi boards- Make use of RPM_OPT_FLAGS during make- Fix sunxi boards (use u-boot.img instead of u-boot.bin) - Remove duplicated default install line- Update to 2015.01-rc1 - Drop upstreamed patches: * add_spl_extfs_support.patch * ti_common_initrd_support.patch - Refresh patch: * drop-marvell.patch - Drop CREDITS file from DOC (dropped upstream)- Apply fix_omap_boot_mode.patch only for omap3/omap4 boards- Update to version 2014.10 - Drop upstreamed patch: * fix_sabrelite_boot.scr.patch - Refresh patches: * arndale.patch * fix_snow_config.patch * fix_exynos5_text_base.patch * exynos5-dt.h.patch (renamed fix_snow_extra_env_settings.patch)h04-ch1d 1740672879 2021.10-150600.11.3.12021.10-150600.11.3.1dumpimagefdtgrepfit_check_signfit_infogen_ethaddr_crcifwitoolmkenvimagemkimageu-boot-toolsgpl-2.0.txtmkimage.1.gz/usr/bin//usr/share/licenses//usr/share/licenses/u-boot-tools//usr/share/man/man1/-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -gobs://build.suse.de/SUSE:Maintenance:37697/SUSE_SLE-15-SP6_Update/7b01f777986682dc925e1e6e378c38c1-u-boot.SUSE_SLE-15-SP6_Update:toolsdrpmxz5x86_64-suse-linux ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=58824b7513d4ea5b5d4c8ee349731f2effcf255d, strippedELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=6873fd45f9abc99479a7d3d9b046101cb4ef4dd3, strippedELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=6d910d87354b8dbf6b034ca7e9e5692f578133eb, strippedELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=4b194f02709715ff43d7ea9e8e513e04b9d2bf33, strippedELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=a751436cce7eb66baf727e9fc8a4fb61dd0fb066, strippedELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=0db34fd6c71a43abfd611f92533c1cc6e2ecbfdc, strippedELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=2f208863c6122f2ebfa610632d8ac97e4f0df836, strippedELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=f1d8957d56940018844ef73df197e0a38e8f5bca, strippeddirectoryASCII texttroff or preprocessor input, ASCII text (gzip compressed data, max compression, from Unix) ',15   R R RRRRRRR RRRRRRRRR R RRRRRRR RRR R RRRRRRR RRRRRRRRRRRRRRRRR R RRRRRRR RRuNIBBN.utf-876f41703227b6d94adc5f9f4adf33f8d6e8f76eac0ffcd8c0225fd3ed85f5b8d? 7zXZ !t/]"k%TzUUit~*b$=w_{NW? bUj! 뮱z cʡu@12wя'k>Slډum7 2uK Bhm**0]o/!p8oʑnWٞE1uF4XōTqk e&Pػ֗ #RvUF#/Qnؐ9B[5g]JU-DpH6yD@T1ר*°ꬌZ'mz6ʼ`K1C45B-Wu)l8=aqy 4yTM?2?&`X 1i\YM$oVSړ}O{Q|D$b".=K"r G*S= A㮦=d79^lIvIU4I oV%שׂrZzQ{8KWhrCCUB\0}0IѱX|65\PзCUԆf+%@jZX,EMd;x-ђK(usWo_ΗALua6/Oҿo h0Q  [ ]Z]?W 4&|y4̟ O *7=`9r6zԀ|X"V#PjHwHE]|CCN ڻw;}3}^ ]!iqEDRΥ^Ŵ])FyJ@4uHkf❇YFiUU12[UlRu}t%U hCej@7>^jsmtxNGOP$/.hZNi4LjCG=1T tG1!w ]޵ B;iP'2p'&jQ:bxA8~0$~r Z!%$_n" ONA?0Q k2x#R A[2Ӑ;(swC)(kWwmЕ ѡҬ[0:EtG*:3j4e} U- ٨^(ϗVVZXP, "pDfPV*>uuMB0ZKeN_W-,g}CD.֪sЮqmT  =#r=fJָE*p=7gloVrO@ K0;Bk_ySDWrHw7jg!!&HיBs cfYLcfJBMPB9PȮ(Zf{t \w]8:10 |4h7uzD@}2?wexڹa>O2_bAo#:-4,cPO4C]lNXnrBZ0 _"@Ud VZ$ըXOV#sj}n|l6wy[݆rKhK(DP0&{y<4/Jez`CpQ3@C- YZ