commit c31c2cca229aa5280d108618bb264c713840a4c2 Author: Greg Kroah-Hartman Date: Wed Sep 15 09:50:49 2021 +0200 Linux 5.10.65 Link: https://lore.kernel.org/r/20210913131100.316353015@linuxfoundation.org Tested-by: Fox Chen Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Linux Kernel Functional Testing Tested-by: Pavel Machek (CIP) Tested-by: Jon Hunter Tested-by: Hulk Robot Tested-by: Guenter Roeck Tested-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman commit b216a075a9abca1401118feb1dde8fad533f245e Author: Linus Walleij Date: Sun Aug 15 01:55:14 2021 +0200 clk: kirkwood: Fix a clocking boot regression commit aaedb9e00e5400220a8871180d23a83e67f29f63 upstream. Since a few kernel releases the Pogoplug 4 has crashed like this during boot: Unable to handle kernel NULL pointer dereference at virtual address 00000002 (...) [] (strlen) from [] (kstrdup+0x1c/0x4c) [] (kstrdup) from [] (__clk_register+0x44/0x37c) [] (__clk_register) from [] (clk_hw_register+0x20/0x44) [] (clk_hw_register) from [] (__clk_hw_register_mux+0x198/0x1e4) [] (__clk_hw_register_mux) from [] (clk_register_mux_table+0x5c/0x6c) [] (clk_register_mux_table) from [] (kirkwood_clk_muxing_setup.constprop.0+0x13c/0x1ac) [] (kirkwood_clk_muxing_setup.constprop.0) from [] (of_clk_init+0x12c/0x214) [] (of_clk_init) from [] (time_init+0x20/0x2c) [] (time_init) from [] (start_kernel+0x3dc/0x56c) [] (start_kernel) from [<00000000>] (0x0) Code: e3130020 1afffffb e12fff1e c08a1078 (e5d03000) This is because the "powersave" mux clock 0 was provided in an unterminated array, which is required by the loop in the driver: /* Count, allocate, and register clock muxes */ for (n = 0; desc[n].name;) n++; Here n will go out of bounds and then call clk_register_mux() on random memory contents after the mux clock. Fix this by terminating the array with a blank entry. Fixes: 105299381d87 ("cpufreq: kirkwood: use the powersave multiplexer") Cc: stable@vger.kernel.org Cc: Andrew Lunn Cc: Chris Packham Cc: Gregory CLEMENT Cc: Sebastian Hesselbarth Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20210814235514.403426-1-linus.walleij@linaro.org Reviewed-by: Andrew Lunn Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman commit 5866b1175df086cb0b3451b11ad88667b53d4018 Author: Daniel Thompson Date: Thu Jul 22 15:46:23 2021 +0100 backlight: pwm_bl: Improve bootloader/kernel device handover commit 79fad92f2e596f5a8dd085788a24f540263ef887 upstream. Currently there are (at least) two problems in the way pwm_bl starts managing the enable_gpio pin. Both occur when the backlight is initially off and the driver finds the pin not already in output mode and, as a result, unconditionally switches it to output-mode and asserts the signal. Problem 1: This could cause the backlight to flicker since, at this stage in driver initialisation, we have no idea what the PWM and regulator are doing (an unconfigured PWM could easily "rest" at 100% duty cycle). Problem 2: This will cause us not to correctly honour the post_pwm_on_delay (which also risks flickers). Fix this by moving the code to configure the GPIO output mode until after we have examines the handover state. That allows us to initialize enable_gpio to off if the backlight is currently off and on if the backlight is on. Cc: stable@vger.kernel.org Reported-by: Marek Vasut Signed-off-by: Daniel Thompson Acked-by: Marek Vasut Tested-by: Marek Vasut Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 4c00435cb813691c6a887184109dc46172147c33 Author: Tetsuo Handa Date: Wed Sep 8 19:27:49 2021 +0900 fbmem: don't allow too huge resolutions commit 8c28051cdcbe9dfcec6bd0a4709d67a09df6edae upstream. syzbot is reporting page fault at vga16fb_fillrect() [1], for vga16fb_check_var() is failing to detect multiplication overflow. if (vxres * vyres > maxmem) { vyres = maxmem / vxres; if (vyres < yres) return -ENOMEM; } Since no module would accept too huge resolutions where multiplication overflow happens, let's reject in the common path. Link: https://syzkaller.appspot.com/bug?extid=04168c8063cfdde1db5e [1] Reported-by: syzbot Debugged-by: Randy Dunlap Signed-off-by: Tetsuo Handa Reviewed-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/185175d6-227a-7b55-433d-b070929b262c@i-love.sakura.ne.jp Signed-off-by: Greg Kroah-Hartman commit 34d099a330e78122eb3da35dfd6db860fa8f230f Author: THOBY Simon Date: Mon Aug 16 08:10:59 2021 +0000 IMA: remove the dependency on CRYPTO_MD5 commit 8510505d55e194d3f6c9644c9f9d12c4f6b0395a upstream. MD5 is a weak digest algorithm that shouldn't be used for cryptographic operation. It hinders the efficiency of a patch set that aims to limit the digests allowed for the extended file attribute namely security.ima. MD5 is no longer a requirement for IMA, nor should it be used there. The sole place where we still use the MD5 algorithm inside IMA is setting the ima_hash algorithm to MD5, if the user supplies 'ima_hash=md5' parameter on the command line. With commit ab60368ab6a4 ("ima: Fallback to the builtin hash algorithm"), setting "ima_hash=md5" fails gracefully when CRYPTO_MD5 is not set: ima: Can not allocate md5 (reason: -2) ima: Allocating md5 failed, going to use default hash algorithm sha256 Remove the CRYPTO_MD5 dependency for IMA. Signed-off-by: THOBY Simon Reviewed-by: Lakshmi Ramasubramanian [zohar@linux.ibm.com: include commit number in patch description for stable.] Cc: stable@vger.kernel.org # 4.17 Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman commit 5cc1ee31353bd45e236c8679ebb561a5ee65fc5c Author: Austin Kim Date: Tue Jun 29 14:50:50 2021 +0100 IMA: remove -Wmissing-prototypes warning commit a32ad90426a9c8eb3915eed26e08ce133bd9e0da upstream. With W=1 build, the compiler throws warning message as below: security/integrity/ima/ima_mok.c:24:12: warning: no previous prototype for ‘ima_mok_init’ [-Wmissing-prototypes] __init int ima_mok_init(void) Silence the warning by adding static keyword to ima_mok_init(). Signed-off-by: Austin Kim Fixes: 41c89b64d718 ("IMA: create machine owner and blacklist keyrings") Cc: stable@vger.kernel.org Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman commit 1319689981096b34fc96f6e2dc0f8eade0434062 Author: Miklos Szeredi Date: Tue Aug 31 14:18:08 2021 +0200 fuse: flush extending writes commit 59bda8ecee2ffc6a602b7bf2b9e43ca669cdbdcd upstream. Callers of fuse_writeback_range() assume that the file is ready for modification by the server in the supplied byte range after the call returns. If there's a write that extends the file beyond the end of the supplied range, then the file needs to be extended to at least the end of the range, but currently that's not done. There are at least two cases where this can cause problems: - copy_file_range() will return short count if the file is not extended up to end of the source range. - FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE will not extend the file, hence the region may not be fully allocated. Fix by flushing writes from the start of the range up to the end of the file. This could be optimized if the writes are non-extending, etc, but it's probably not worth the trouble. Fixes: a2bc92362941 ("fuse: fix copy_file_range() in the writeback case") Fixes: 6b1bdb56b17c ("fuse: allow fallocate(FALLOC_FL_ZERO_RANGE)") Cc: # v5.2 Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman commit 8018100c544458351bbd445d0c2829aebf57d520 Author: Miklos Szeredi Date: Tue Aug 17 21:05:16 2021 +0200 fuse: truncate pagecache on atomic_o_trunc commit 76224355db7570cbe6b6f75c8929a1558828dd55 upstream. fuse_finish_open() will be called with FUSE_NOWRITE in case of atomic O_TRUNC. This can deadlock with fuse_wait_on_page_writeback() in fuse_launder_page() triggered by invalidate_inode_pages2(). Fix by replacing invalidate_inode_pages2() in fuse_finish_open() with a truncate_pagecache() call. This makes sense regardless of FOPEN_KEEP_CACHE or fc->writeback cache, so do it unconditionally. Reported-by: Xie Yongji Reported-and-tested-by: syzbot+bea44a5189836d956894@syzkaller.appspotmail.com Fixes: e4648309b85a ("fuse: truncate pending writes on O_TRUNC") Cc: Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman commit a8ca1fba54be12a2872d90ba934171fba8ddd9aa Author: Claudiu Beznea Date: Tue Jul 27 10:40:05 2021 +0300 ARM: dts: at91: add pinctrl-{names, 0} for all gpios commit bf781869e5cf3e4ec1a47dad69b6f0df97629cbd upstream. Add pinctrl-names and pinctrl-0 properties on controllers that claims to use pins to avoid failures due to commit 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges") and also to avoid using pins that may be claimed my other IPs. Fixes: b7c2b6157079 ("ARM: at91: add Atmel's SAMA5D3 Xplained board") Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board") Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210727074006.1609989-1-claudiu.beznea@microchip.com Cc: # v5.7+ Signed-off-by: Greg Kroah-Hartman commit c2c7eefc93718a3bdffe031350d23a665aac15aa Author: Sean Christopherson Date: Tue Aug 10 07:45:26 2021 -0700 KVM: nVMX: Unconditionally clear nested.pi_pending on nested VM-Enter commit f7782bb8d818d8f47c26b22079db10599922787a upstream. Clear nested.pi_pending on nested VM-Enter even if L2 will run without posted interrupts enabled. If nested.pi_pending is left set from a previous L2, vmx_complete_nested_posted_interrupt() will pick up the stale flag and exit to userspace with an "internal emulation error" due the new L2 not having a valid nested.pi_desc. Arguably, vmx_complete_nested_posted_interrupt() should first check for posted interrupts being enabled, but it's also completely reasonable that KVM wouldn't screw up a fundamental flag. Not to mention that the mere existence of nested.pi_pending is a long-standing bug as KVM shouldn't move the posted interrupt out of the IRR until it's actually processed, e.g. KVM effectively drops an interrupt when it performs a nested VM-Exit with a "pending" posted interrupt. Fixing the mess is a future problem. Prior to vmx_complete_nested_posted_interrupt() interpreting a null PI descriptor as an error, this was a benign bug as the null PI descriptor effectively served as a check on PI not being enabled. Even then, the new flow did not become problematic until KVM started checking the result of kvm_check_nested_events(). Fixes: 705699a13994 ("KVM: nVMX: Enable nested posted interrupt processing") Fixes: 966eefb89657 ("KVM: nVMX: Disable vmcs02 posted interrupts if vmcs12 PID isn't mappable") Fixes: 47d3530f86c0 ("KVM: x86: Exit to userspace when kvm_check_nested_events fails") Cc: stable@vger.kernel.org Cc: Jim Mattson Signed-off-by: Sean Christopherson Message-Id: <20210810144526.2662272-1-seanjc@google.com> Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit bf36224463356526f56d992d3f6d09cbd57e2d2f Author: Maxim Levitsky Date: Thu Aug 26 12:57:49 2021 +0300 KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation commit 81b4b56d4f8130bbb99cf4e2b48082e5b4cfccb9 upstream. If we are emulating an invalid guest state, we don't have a correct exit reason, and thus we shouldn't do anything in this function. Signed-off-by: Maxim Levitsky Message-Id: <20210826095750.1650467-2-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Fixes: 95b5a48c4f2b ("KVM: VMX: Handle NMIs, #MCs and async #PFs in common irqs-disabled fn", 2019-06-18) Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit c06e6ff2fcc34476eda29c5c14ca0db962f500cf Author: Zelin Deng Date: Wed Apr 28 10:22:01 2021 +0800 KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted commit d9130a2dfdd4b21736c91b818f87dbc0ccd1e757 upstream. When MSR_IA32_TSC_ADJUST is written by guest due to TSC ADJUST feature especially there's a big tsc warp (like a new vCPU is hot-added into VM which has been up for a long time), tsc_offset is added by a large value then go back to guest. This causes system time jump as tsc_timestamp is not adjusted in the meantime and pvclock monotonic character. To fix this, just notify kvm to update vCPU's guest time before back to guest. Cc: stable@vger.kernel.org Signed-off-by: Zelin Deng Signed-off-by: Paolo Bonzini Message-Id: <1619576521-81399-2-git-send-email-zelin.deng@linux.alibaba.com> Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 1db337b10d127a6876e7f83066b06663e1ddf11f Author: Halil Pasic Date: Fri Aug 27 14:54:29 2021 +0200 KVM: s390: index kvm->arch.idle_mask by vcpu_idx commit a3e03bc1368c1bc16e19b001fc96dc7430573cc8 upstream. While in practice vcpu->vcpu_idx == vcpu->vcp_id is often true, it may not always be, and we must not rely on this. Reason is that KVM decides the vcpu_idx, userspace decides the vcpu_id, thus the two might not match. Currently kvm->arch.idle_mask is indexed by vcpu_id, which implies that code like for_each_set_bit(vcpu_id, kvm->arch.idle_mask, online_vcpus) { vcpu = kvm_get_vcpu(kvm, vcpu_id); do_stuff(vcpu); } is not legit. Reason is that kvm_get_vcpu expects an vcpu_idx, not an vcpu_id. The trouble is, we do actually use kvm->arch.idle_mask like this. To fix this problem we have two options. Either use kvm_get_vcpu_by_id(vcpu_id), which would loop to find the right vcpu_id, or switch to indexing via vcpu_idx. The latter is preferable for obvious reasons. Let us make switch from indexing kvm->arch.idle_mask by vcpu_id to indexing it by vcpu_idx. To keep gisa_int.kicked_mask indexed by the same index as idle_mask lets make the same change for it as well. Fixes: 1ee0bc559dc3 ("KVM: s390: get rid of local_int array") Signed-off-by: Halil Pasic Reviewed-by: Christian Bornträger Reviewed-by: Claudio Imbrenda Cc: # 3.15+ Link: https://lore.kernel.org/r/20210827125429.1912577-1-pasic@linux.ibm.com Signed-off-by: Christian Borntraeger Signed-off-by: Greg Kroah-Hartman commit dc9db2a2aae4c031f95c3e35528670b0520da365 Author: Sean Christopherson Date: Tue Aug 31 09:42:22 2021 -0700 Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()" commit e7177339d7b5f9594b316842122b5fda9513d5e2 upstream. Revert a misguided illegal GPA check when "translating" a non-nested GPA. The check is woefully incomplete as it does not fill in @exception as expected by all callers, which leads to KVM attempting to inject a bogus exception, potentially exposing kernel stack information in the process. WARNING: CPU: 0 PID: 8469 at arch/x86/kvm/x86.c:525 exception_type+0x98/0xb0 arch/x86/kvm/x86.c:525 CPU: 1 PID: 8469 Comm: syz-executor531 Not tainted 5.14.0-rc7-syzkaller #0 RIP: 0010:exception_type+0x98/0xb0 arch/x86/kvm/x86.c:525 Call Trace: x86_emulate_instruction+0xef6/0x1460 arch/x86/kvm/x86.c:7853 kvm_mmu_page_fault+0x2f0/0x1810 arch/x86/kvm/mmu/mmu.c:5199 handle_ept_misconfig+0xdf/0x3e0 arch/x86/kvm/vmx/vmx.c:5336 __vmx_handle_exit arch/x86/kvm/vmx/vmx.c:6021 [inline] vmx_handle_exit+0x336/0x1800 arch/x86/kvm/vmx/vmx.c:6038 vcpu_enter_guest+0x2a1c/0x4430 arch/x86/kvm/x86.c:9712 vcpu_run arch/x86/kvm/x86.c:9779 [inline] kvm_arch_vcpu_ioctl_run+0x47d/0x1b20 arch/x86/kvm/x86.c:10010 kvm_vcpu_ioctl+0x49e/0xe50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3652 The bug has escaped notice because practically speaking the GPA check is useless. The GPA check in question only comes into play when KVM is walking guest page tables (or "translating" CR3), and KVM already handles illegal GPA checks by setting reserved bits in rsvd_bits_mask for each PxE, or in the case of CR3 for loading PTDPTRs, manually checks for an illegal CR3. This particular failure doesn't hit the existing reserved bits checks because syzbot sets guest.MAXPHYADDR=1, and IA32 architecture simply doesn't allow for such an absurd MAXPHYADDR, e.g. 32-bit paging doesn't define any reserved PA bits checks, which KVM emulates by only incorporating the reserved PA bits into the "high" bits, i.e. bits 63:32. Simply remove the bogus check. There is zero meaningful value and no architectural justification for supporting guest.MAXPHYADDR < 32, and properly filling the exception would introduce non-trivial complexity. This reverts commit ec7771ab471ba6a945350353617e2e3385d0e013. Fixes: ec7771ab471b ("KVM: x86: mmu: Add guest physical address check in translate_gpa()") Cc: stable@vger.kernel.org Reported-by: syzbot+200c08e88ae818f849ce@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson Message-Id: <20210831164224.1119728-2-seanjc@google.com> Reviewed-by: Vitaly Kuznetsov Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit c6b42ec1c93655f00f4438ed32acb8c84ff127f2 Author: Babu Moger Date: Fri Aug 20 16:52:42 2021 -0500 x86/resctrl: Fix a maybe-uninitialized build warning treated as error commit 527f721478bce3f49b513a733bacd19d6f34b08c upstream. The recent commit 064855a69003 ("x86/resctrl: Fix default monitoring groups reporting") caused a RHEL build failure with an uninitialized variable warning treated as an error because it removed the default case snippet. The RHEL Makefile uses '-Werror=maybe-uninitialized' to force possibly uninitialized variable warnings to be treated as errors. This is also reported by smatch via the 0day robot. The error from the RHEL build is: arch/x86/kernel/cpu/resctrl/monitor.c: In function ‘__mon_event_count’: arch/x86/kernel/cpu/resctrl/monitor.c:261:12: error: ‘m’ may be used uninitialized in this function [-Werror=maybe-uninitialized] m->chunks += chunks; ^~ The upstream Makefile does not build using '-Werror=maybe-uninitialized'. So, the problem is not seen there. Fix the problem by putting back the default case snippet. [ bp: note that there's nothing wrong with the code and other compilers do not trigger this warning - this is being done just so the RHEL compiler is happy. ] Fixes: 064855a69003 ("x86/resctrl: Fix default monitoring groups reporting") Reported-by: Terry Bowman Reported-by: kernel test robot Signed-off-by: Babu Moger Signed-off-by: Borislav Petkov Reviewed-by: Reinette Chatre Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/162949631908.23903.17090272726012848523.stgit@bmoger-ubuntu Signed-off-by: Greg Kroah-Hartman commit bafece6cd1f9908d73be31b534bf91c15fbedd94 Author: Kim Phillips Date: Tue Aug 17 17:10:41 2021 -0500 perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op commit f11dd0d80555cdc8eaf5cfc9e19c9e198217f9f1 upstream. Commit: 2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs") neglected to do so. Fixes: 2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs") Signed-off-by: Kim Phillips Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210817221048.88063-2-kim.phillips@amd.com Signed-off-by: Greg Kroah-Hartman commit ae95c3a147d5a40465c39e538ed82ba9bb0ea4d0 Author: Nguyen Dinh Phi Date: Mon Aug 23 08:06:41 2021 +0800 tty: Fix data race between tiocsti() and flush_to_ldisc() commit bb2853a6a421a052268eee00fd5d3f6b3504b2b1 upstream. The ops->receive_buf() may be accessed concurrently from these two functions. If the driver flushes data to the line discipline receive_buf() method while tiocsti() is waiting for the ops->receive_buf() to finish its work, the data race will happen. For example: tty_ioctl |tty_ldisc_receive_buf ->tioctsi | ->tty_port_default_receive_buf | ->tty_ldisc_receive_buf ->hci_uart_tty_receive | ->hci_uart_tty_receive ->h4_recv | ->h4_recv In this case, the h4 receive buffer will be overwritten by the latecomer, and we will lost the data. Hence, change tioctsi() function to use the exclusive lock interface from tty_buffer to avoid the data race. Reported-by: syzbot+97388eb9d31b997fe1d0@syzkaller.appspotmail.com Reviewed-by: Jiri Slaby Signed-off-by: Nguyen Dinh Phi Link: https://lore.kernel.org/r/20210823000641.2082292-1-phind.uet@gmail.com Cc: stable Signed-off-by: Greg Kroah-Hartman commit 4d0e6d6fe4e26c06c0e306e489aadef8b5183ff4 Author: Pavel Begunkov Date: Mon Jul 19 11:53:00 2021 +0100 bio: fix page leak bio_add_hw_page failure commit d9cf3bd531844ffbfe94b16e417037a16efc988d upstream. __bio_iov_append_get_pages() doesn't put not appended pages on bio_add_hw_page() failure, so potentially leaking them, fix it. Also, do the same for __bio_iov_iter_get_pages(), even though it looks like it can't be triggered by userspace in this case. Fixes: 0512a75b98f8 ("block: Introduce REQ_OP_ZONE_APPEND") Cc: stable@vger.kernel.org # 5.8+ Signed-off-by: Pavel Begunkov Link: https://lore.kernel.org/r/1edfa6a2ffd66d55e6345a477df5387d2c1415d0.1626653825.git.asml.silence@gmail.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 24fbd77d5a0fd2f22d5a0e8570499302b2dea2be Author: Jens Axboe Date: Mon Aug 30 19:37:41 2021 -0600 io_uring: IORING_OP_WRITE needs hash_reg_file set commit 7b3188e7ed54102a5dcc73d07727f41fb528f7c8 upstream. During some testing, it became evident that using IORING_OP_WRITE doesn't hash buffered writes like the other writes commands do. That's simply an oversight, and can cause performance regressions when doing buffered writes with this command. Correct that and add the flag, so that buffered writes are correctly hashed when using the non-iovec based write command. Cc: stable@vger.kernel.org Fixes: 3a6820f2bb8a ("io_uring: add non-vectored read/write commands") Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 656f343d724b45295f73000eb6e7bd3d212af116 Author: Lukas Hannen Date: Wed Aug 25 10:12:43 2021 +0000 time: Handle negative seconds correctly in timespec64_to_ns() commit 39ff83f2f6cc5cc1458dfcea9697f96338210beb upstream. timespec64_ns() prevents multiplication overflows by comparing the seconds value of the timespec to KTIME_SEC_MAX. If the value is greater or equal it returns KTIME_MAX. But that check casts the signed seconds value to unsigned which makes the comparision true for all negative values and therefore return wrongly KTIME_MAX. Negative second values are perfectly valid and required in some places, e.g. ptp_clock_adjtime(). Remove the cast and add a check for the negative boundary which is required to prevent undefined behaviour due to multiplication underflow. Fixes: cb47755725da ("time: Prevent undefined behaviour in timespec64_to_ns()")' Signed-off-by: Lukas Hannen Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/AM6PR01MB541637BD6F336B8FFB72AF80EEC69@AM6PR01MB5416.eurprd01.prod.exchangelabs.com Signed-off-by: Greg Kroah-Hartman commit 611b7f9dc9f696ba0f9ab03b5c6500f3718cbebe Author: Jaegeuk Kim Date: Thu Aug 19 14:00:57 2021 -0700 f2fs: guarantee to write dirty data when enabling checkpoint back commit dddd3d65293a52c2c3850c19b1e5115712e534d8 upstream. We must flush all the dirty data when enabling checkpoint back. Let's guarantee that first by adding a retry logic on sync_inodes_sb(). In addition to that, this patch adds to flush data in fsync when checkpoint is disabled, which can mitigate the sync_inodes_sb() failures in advance. Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman commit 75ffcd85dff52e3e94a62587d339bc2fb81aba07 Author: Justin M. Forbes Date: Fri Jul 2 17:31:53 2021 -0500 iwlwifi Add support for ax201 in Samsung Galaxy Book Flex2 Alpha commit 2f32c147a3816d789722c0bd242a9431332ec3ed upstream. The Samsung Galaxy Book Flex2 Alpha uses an ax201 with the ID a0f0/6074. This works fine with the existing driver once it knows to claim it. Simple patch to add the device. Signed-off-by: Justin M. Forbes Reviewed-by: Jaehoon Chung Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210702223155.1981510-1-jforbes@fedoraproject.org Signed-off-by: Greg Kroah-Hartman commit 3853c0c0703d945c5589e314d9a919761eb28254 Author: Douglas Anderson Date: Fri Aug 13 07:34:05 2021 -0700 ASoC: rt5682: Remove unused variable in rt5682_i2c_remove() commit a1ea05723c27a6f77894a60038a7b2b12fcec9a7 upstream. In commit 772d44526e20 ("ASoC: rt5682: Properly turn off regulators if wrong device ID") I deleted code but forgot to delete a variable that's now unused. Delete it. Fixes: 772d44526e20 ("ASoC: rt5682: Properly turn off regulators if wrong device ID") Reported-by: Stephen Rothwell Signed-off-by: Douglas Anderson Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20210813073402.1.Iaa9425cfab80f5233afa78b32d02b6dc23256eb3@changeid Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit c4f1ad3930261ee153b5a1230662fdfb54725e1a Author: Eric Dumazet Date: Mon Aug 30 19:02:10 2021 -0700 ipv4: fix endianness issue in inet_rtm_getroute_build_skb() [ Upstream commit 92548b0ee220e000d81c27ac9a80e0ede895a881 ] The UDP length field should be in network order. This removes the following sparse error: net/ipv4/route.c:3173:27: warning: incorrect type in assignment (different base types) net/ipv4/route.c:3173:27: expected restricted __be16 [usertype] len net/ipv4/route.c:3173:27: got unsigned long Fixes: 404eb77ea766 ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE") Signed-off-by: Eric Dumazet Cc: Roopa Prabhu Cc: David Ahern Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit dc4ff31506f464aee303bb632829568c1c85b9f9 Author: Sunil Goutham Date: Mon Aug 30 23:30:46 2021 +0530 octeontx2-af: Set proper errorcode for IPv4 checksum errors [ Upstream commit 1e4428b6dba9b683dc2ec0a56ed7879de3200cce ] With current config, for packets with IPv4 checksum errors, errorcode is being set to UNKNOWN. Hence added a separate errorcodes for outer and inner IPv4 checksum and changed NPC configuration accordingly. Also turn on L2 multicast address check in NPC protocol check block. Fixes: 6b3321bacc5a ("octeontx2-af: Enable packet length and csum validation") Signed-off-by: Sunil Goutham Signed-off-by: Subbaraya Sundeep Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit bf2991f8e78338fbb95a74473dea2c8988e63ac1 Author: Subbaraya Sundeep Date: Mon Aug 30 23:30:45 2021 +0530 octeontx2-af: Fix static code analyzer reported issues [ Upstream commit 698a82ebfb4b2f2014baf31b7324b328a2a6366e ] This patch fixes the static code analyzer reported issues in rvu_npc.c. The reported errors are different sizes of operands in bitops and returning uninitialized values. Fixes: 651cd2652339 ("octeontx2-af: MCAM entry installation support") Signed-off-by: Subbaraya Sundeep Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit ee485124b7fac8ba42832c68f99f757bbd6ea864 Author: Subbaraya Sundeep Date: Mon Aug 30 23:30:43 2021 +0530 octeontx2-af: Fix loop in free and unmap counter [ Upstream commit 6537e96d743b89294b397b4865c6c061abae31b0 ] When the given counter does not belong to the entry then code ends up in infinite loop because the loop cursor, entry is not getting updated further. This patch fixes that by updating entry for every iteration. Fixes: a958dd59f9ce ("octeontx2-af: Map or unmap NPC MCAM entry and counter") Signed-off-by: Subbaraya Sundeep Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit a67c66c1bb1244c0a9028fa1003e99a264a1abd8 Author: Stefan Wahren Date: Sat Aug 28 16:23:15 2021 +0200 net: qualcomm: fix QCA7000 checksum handling [ Upstream commit 429205da6c834447a57279af128bdd56ccd5225e ] Based on tests the QCA7000 doesn't support checksum offloading. So assume ip_summed is CHECKSUM_NONE and let the kernel take care of the checksum handling. This fixes data transfer issues in noisy environments. Reported-by: Michael Heimpold Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit f96bc82e0348be15def7b98ebfd6e276d2c1e8a1 Author: Xiyu Yang Date: Sun Aug 29 23:58:01 2021 +0800 net: sched: Fix qdisc_rate_table refcount leak when get tcf_block failed [ Upstream commit c66070125837900163b81a03063ddd657a7e9bfb ] The reference counting issue happens in one exception handling path of cbq_change_class(). When failing to get tcf_block, the function forgets to decrease the refcount of "rtab" increased by qdisc_put_rtab(), causing a refcount leak. Fix this issue by jumping to "failure" label when get tcf_block failed. Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure") Signed-off-by: Xiyu Yang Reviewed-by: Cong Wang Link: https://lore.kernel.org/r/1630252681-71588-1-git-send-email-xiyuyang19@fudan.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 5867e20e1808acd0c832ddea2587e5ee49813874 Author: Eric Dumazet Date: Sun Aug 29 15:16:15 2021 -0700 ipv4: make exception cache less predictible [ Upstream commit 67d6d681e15b578c1725bad8ad079e05d1c48a8e ] Even after commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in fnhe_hashfun()"), an attacker can still use brute force to learn some secrets from a victim linux host. One way to defeat these attacks is to make the max depth of the hash table bucket a random value. Before this patch, each bucket of the hash table used to store exceptions could contain 6 items under attack. After the patch, each bucket would contains a random number of items, between 6 and 10. The attacker can no longer infer secrets. This is slightly increasing memory size used by the hash table, by 50% in average, we do not expect this to be a problem. This patch is more complex than the prior one (IPv6 equivalent), because IPv4 was reusing the oldest entry. Since we need to be able to evict more than one entry per update_or_create_fnhe() call, I had to replace fnhe_oldest() with fnhe_remove_oldest(). Also note that we will queue extra kfree_rcu() calls under stress, which hopefully wont be a too big issue. Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Eric Dumazet Reported-by: Keyu Man Cc: Willy Tarreau Signed-off-by: David S. Miller Reviewed-by: David Ahern Tested-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 8692f0bb29927d13a871b198adff1d336a8d2d00 Author: Eric Dumazet Date: Sun Aug 29 15:16:14 2021 -0700 ipv6: make exception cache less predictible [ Upstream commit a00df2caffed3883c341d5685f830434312e4a43 ] Even after commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()"), an attacker can still use brute force to learn some secrets from a victim linux host. One way to defeat these attacks is to make the max depth of the hash table bucket a random value. Before this patch, each bucket of the hash table used to store exceptions could contain 6 items under attack. After the patch, each bucket would contains a random number of items, between 6 and 10. The attacker can no longer infer secrets. This is slightly increasing memory size used by the hash table, we do not expect this to be a problem. Following patch is dealing with the same issue in IPv4. Fixes: 35732d01fe31 ("ipv6: introduce a hash table to store dst cache") Signed-off-by: Eric Dumazet Reported-by: Keyu Man Cc: Wei Wang Cc: Martin KaFai Lau Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 4663aaef24dffd004fa030b7434de7a7e9a34f26 Author: Ahmad Fatoum Date: Tue Aug 17 08:35:22 2021 +0200 brcmfmac: pcie: fix oops on failure to resume and reprobe [ Upstream commit d745ca4f2c4ae9f1bd8cf7d8ac6e22d739bffd19 ] When resuming from suspend, brcmf_pcie_pm_leave_D3 will first attempt a hot resume and then fall back to removing the PCI device and then reprobing. If this probe fails, the kernel will oops, because brcmf_err, which is called to report the failure will dereference the stale bus pointer. Open code and use the default bus-less brcmf_err to avoid this. Fixes: 8602e62441ab ("brcmfmac: pass bus to the __brcmf_err() in pcie.c") Signed-off-by: Ahmad Fatoum Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210817063521.22450-1-a.fatoum@pengutronix.de Signed-off-by: Sasha Levin commit e68128e078da52e4bfd1cd5a9db3a46365c2e05b Author: Zenghui Yu Date: Tue Jul 27 10:52:31 2021 +0800 bcma: Fix memory leak for internally-handled cores [ Upstream commit b63aed3ff195130fef12e0af590f4838cf0201d8 ] kmemleak reported that dev_name() of internally-handled cores were leaked on driver unbinding. Let's use device_initialize() to take refcounts for them and put_device() to properly free the related stuff. While looking at it, there's another potential issue for those which should be *registered* into driver core. If device_register() failed, we put device once and freed bcma_device structures. In bcma_unregister_cores(), they're treated as unregistered and we hit both UAF and double-free. That smells not good and has also been fixed now. Fixes: ab54bc8460b5 ("bcma: fill core details for every device") Signed-off-by: Zenghui Yu Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210727025232.663-2-yuzenghui@huawei.com Signed-off-by: Sasha Levin commit 26fae720c1124cbfdc95a37379f402a1ced8a11a Author: Sudarsana Reddy Kalluru Date: Fri Aug 27 04:52:25 2021 -0700 atlantic: Fix driver resume flow. [ Upstream commit 57f780f1c43362b86fd23d20bd940e2468237716 ] Driver crashes when restoring from the Hibernate. In the resume flow, driver need to clean up the older nic/vec objects and re-initialize them. Fixes: 8aaa112a57c1d ("net: atlantic: refactoring pm logic") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit cb996dc9f93785145f129c183e17bd6abb3177b3 Author: Dan Carpenter Date: Fri Aug 13 14:34:38 2021 +0300 ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point() [ Upstream commit fd6729ec534cffbbeb3917761e6d1fe6a412d3fe ] This error path is unlikely because of it checked for NULL and returned -ENOMEM earlier in the function. But it should return an error code here as well if we ever do hit it because of a race condition or something. Fixes: bdcd81707973 ("Add ath6kl cleaned up driver") Signed-off-by: Dan Carpenter Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210813113438.GB30697@kili Signed-off-by: Sasha Levin commit baecab8c469f45e0b56695a2921eb908cc446052 Author: Brett Creeley Date: Tue Aug 24 12:27:53 2021 -0700 ice: Only lock to update netdev dev_addr [ Upstream commit b357d9717be7f95fde2c6c4650b186a995b71e59 ] commit 3ba7f53f8bf1 ("ice: don't remove netdev->dev_addr from uc sync list") introduced calls to netif_addr_lock_bh() and netif_addr_unlock_bh() in the driver's ndo_set_mac() callback. This is fine since the driver is updated the netdev's dev_addr, but since this is a spinlock, the driver cannot sleep when the lock is held. Unfortunately the functions to add/delete MAC filters depend on a mutex. This was causing a trace with the lock debug kernel config options enabled when changing the mac address via iproute. [ 203.273059] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281 [ 203.273065] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 6698, name: ip [ 203.273068] Preemption disabled at: [ 203.273068] [] ice_set_mac_address+0x8b/0x1c0 [ice] [ 203.273097] CPU: 31 PID: 6698 Comm: ip Tainted: G S W I 5.14.0-rc4 #2 [ 203.273100] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ 203.273102] Call Trace: [ 203.273107] dump_stack_lvl+0x33/0x42 [ 203.273113] ? ice_set_mac_address+0x8b/0x1c0 [ice] [ 203.273124] ___might_sleep.cold.150+0xda/0xea [ 203.273131] mutex_lock+0x1c/0x40 [ 203.273136] ice_remove_mac+0xe3/0x180 [ice] [ 203.273155] ? ice_fltr_add_mac_list+0x20/0x20 [ice] [ 203.273175] ice_fltr_prepare_mac+0x43/0xa0 [ice] [ 203.273194] ice_set_mac_address+0xab/0x1c0 [ice] [ 203.273206] dev_set_mac_address+0xb8/0x120 [ 203.273210] dev_set_mac_address_user+0x2c/0x50 [ 203.273212] do_setlink+0x1dd/0x10e0 [ 203.273217] ? __nla_validate_parse+0x12d/0x1a0 [ 203.273221] __rtnl_newlink+0x530/0x910 [ 203.273224] ? __kmalloc_node_track_caller+0x17f/0x380 [ 203.273230] ? preempt_count_add+0x68/0xa0 [ 203.273236] ? _raw_spin_lock_irqsave+0x1f/0x30 [ 203.273241] ? kmem_cache_alloc_trace+0x4d/0x440 [ 203.273244] rtnl_newlink+0x43/0x60 [ 203.273245] rtnetlink_rcv_msg+0x13a/0x380 [ 203.273248] ? rtnl_calcit.isra.40+0x130/0x130 [ 203.273250] netlink_rcv_skb+0x4e/0x100 [ 203.273256] netlink_unicast+0x1a2/0x280 [ 203.273258] netlink_sendmsg+0x242/0x490 [ 203.273260] sock_sendmsg+0x58/0x60 [ 203.273263] ____sys_sendmsg+0x1ef/0x260 [ 203.273265] ? copy_msghdr_from_user+0x5c/0x90 [ 203.273268] ? ____sys_recvmsg+0xe6/0x170 [ 203.273270] ___sys_sendmsg+0x7c/0xc0 [ 203.273272] ? copy_msghdr_from_user+0x5c/0x90 [ 203.273274] ? ___sys_recvmsg+0x89/0xc0 [ 203.273276] ? __netlink_sendskb+0x50/0x50 [ 203.273278] ? mod_objcg_state+0xee/0x310 [ 203.273282] ? __dentry_kill+0x114/0x170 [ 203.273286] ? get_max_files+0x10/0x10 [ 203.273288] __sys_sendmsg+0x57/0xa0 [ 203.273290] do_syscall_64+0x37/0x80 [ 203.273295] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 203.273296] RIP: 0033:0x7f8edf96e278 [ 203.273298] Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 63 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 [ 203.273300] RSP: 002b:00007ffcb8bdac08 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 203.273303] RAX: ffffffffffffffda RBX: 000000006115e0ae RCX: 00007f8edf96e278 [ 203.273304] RDX: 0000000000000000 RSI: 00007ffcb8bdac70 RDI: 0000000000000003 [ 203.273305] RBP: 0000000000000000 R08: 0000000000000001 R09: 00007ffcb8bda5b0 [ 203.273306] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 [ 203.273306] R13: 0000555e10092020 R14: 0000000000000000 R15: 0000000000000005 Fix this by only locking when changing the netdev->dev_addr. Also, make sure to restore the old netdev->dev_addr on any failures. Fixes: 3ba7f53f8bf1 ("ice: don't remove netdev->dev_addr from uc sync list") Signed-off-by: Brett Creeley Tested-by: Gurucharan G Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit bd6d9c83f44d1a1c7483eebd4ffd67016d9ceb24 Author: Abhishek Naik Date: Thu Aug 5 14:21:53 2021 +0300 iwlwifi: skip first element in the WTAS ACPI table [ Upstream commit 19426d54302e199b3fd2d575f926a13af66be2b9 ] By mistake we were considering the first element of the WTAS wifi package as part of the data we want to rid, but that element is the wifi package signature (always 0x07), so it should be skipped. Change the code to read the data starting from element 1 instead. Signed-off-by: Abhishek Naik Fixes: 28dd7ccdc56f ("iwlwifi: acpi: read TAS table from ACPI and send it to the FW") Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20210805141826.ff8148197b15.I70636c04e37b2b57a5df3ce611511f62203d27a7@changeid Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin commit 4c4f868082ed70186bfe19460e6b6dc717e6df09 Author: Emmanuel Grumbach Date: Wed Dec 9 23:16:20 2020 +0200 iwlwifi: follow the new inclusive terminology [ Upstream commit cdaba917268d7b58bf02fcc587cb2a7a277dc931 ] The new inclusive terminology requires to change a few terms that were used in iwlwifi. Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20201209231352.1eb4c8625f36.I1b17b68d4a8e77071da3e15ffbd902d15c1d4938@changeid Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin commit 5c305b90d8a1c825455cb41f0d59a73ff17f638b Author: Christophe JAILLET Date: Mon Aug 16 07:25:28 2021 +0200 ASoC: wcd9335: Disable irq on slave ports in the remove function [ Upstream commit d3efd26af2e044ff2b48d38bb871630282d77e60 ] The probe calls 'wcd9335_setup_irqs()' to enable interrupts on all slave ports. This must be undone in the remove function. Add a 'wcd9335_teardown_irqs()' function that undoes 'wcd9335_setup_irqs()' function, and call it from the remove function. Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec") Signed-off-by: Christophe JAILLET Message-Id: <8f761244d79bd4c098af8a482be9121d3a486d1b.1629091028.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 729a459efd30dbb8d57410560d8eafe1268e3d63 Author: Christophe JAILLET Date: Mon Aug 16 07:25:20 2021 +0200 ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function [ Upstream commit fc6fc81caa63900cef9ebb8b2e365c3ed5a9effb ] If 'wcd9335_setup_irqs()' fails, me must release the memory allocated in 'wcd_clsh_ctrl_alloc()', as already done in the remove function. Add an error handling path and the missing 'wcd_clsh_ctrl_free()' call. Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec") Signed-off-by: Christophe JAILLET Message-Id: <6dc12372f09fabb70bf05941dbe6a1382dc93e43.1629091028.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 9c640a2bb5515832993728150e261b91553e9ee5 Author: Christophe JAILLET Date: Mon Aug 16 07:25:10 2021 +0200 ASoC: wcd9335: Fix a double irq free in the remove function [ Upstream commit 7a6a723e98aa45f393e6add18f7309dfffa1b0e2 ] There is no point in calling 'free_irq()' explicitly for 'WCD9335_IRQ_SLIMBUS' in the remove function. The irqs are requested in 'wcd9335_setup_irqs()' using a resource managed function (i.e. 'devm_request_threaded_irq()'). 'wcd9335_setup_irqs()' requests all what is defined in the 'wcd9335_irqs' structure. This structure has only one entry for 'WCD9335_IRQ_SLIMBUS'. So 'devm_request...irq()' + explicit 'free_irq()' would lead to a double free. Remove the unneeded 'free_irq()' from the remove function. Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec") Signed-off-by: Christophe JAILLET Message-Id: <0614d63bc00edd7e81dd367504128f3d84f72efa.1629091028.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 8446bb0ff1d01ba1fbe27d4d2c511e47b1a472c3 Author: Andy Duan Date: Thu Aug 19 10:10:33 2021 +0800 tty: serial: fsl_lpuart: fix the wrong mapbase value [ Upstream commit d5c38948448abc2bb6b36dbf85a554bf4748885e ] Register offset needs to be applied on mapbase also. dma_tx/rx_request use the physical address of UARTDATA. Register offset is currently only applied to membase (the corresponding virtual addr) but not on mapbase. Fixes: 24b1e5f0e83c ("tty: serial: lpuart: add imx7ulp support") Reviewed-by: Leonard Crestez Signed-off-by: Adriana Reus Signed-off-by: Sherry Sun Signed-off-by: Andy Duan Link: https://lore.kernel.org/r/20210819021033.32606-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 9ee4ff8cbe392669e187e9c370a09d16493ae1ef Author: Christophe JAILLET Date: Wed Aug 18 21:32:49 2021 +0200 usb: bdc: Fix a resource leak in the error handling path of 'bdc_probe()' [ Upstream commit 6f15a2a09cecb7a2faba4a75bbd101f6f962294b ] If an error occurs after a successful 'clk_prepare_enable()' call, it must be undone by a corresponding 'clk_disable_unprepare()' call. This call is already present in the remove function. Add this call in the error handling path and reorder the code so that the 'clk_prepare_enable()' call happens later in the function. The goal is to have as much managed resources functions as possible before the 'clk_prepare_enable()' call in order to keep the error handling path simple. While at it, remove the now unneeded 'clk' variable. Fixes: c87dca047849 ("usb: bdc: Add clock enable for new chips with a separate BDC clock") Acked-by: Florian Fainelli Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/f8a4a6897deb0c8cb2e576580790303550f15fcd.1629314734.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 4d2823abd1fe4e21653b3efafdbefa012d9d38d4 Author: Christophe JAILLET Date: Wed Aug 18 21:32:38 2021 +0200 usb: bdc: Fix an error handling path in 'bdc_probe()' when no suitable DMA config is available [ Upstream commit d2f42e09393c774ab79088d8e3afcc62b3328fc9 ] If no suitable DMA configuration is available, a previous 'bdc_phy_init()' call must be undone by a corresponding 'bdc_phy_exit()' call. Branch to the existing error handling path instead of returning directly. Fixes: cc29d4f67757 ("usb: bdc: Add support for USB phy") Acked-by: Florian Fainelli Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/0c5910979f39225d5d8fe68c9ab1c147c68ddee1.1629314734.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 86b79054d76bc244e04b6d2f9171016d9daf8639 Author: Evgeny Novikov Date: Wed Aug 25 20:09:02 2021 +0300 usb: ehci-orion: Handle errors of clk_prepare_enable() in probe [ Upstream commit 4720f1bf4ee4a784d9ece05420ba33c9222a3004 ] ehci_orion_drv_probe() did not account for possible errors of clk_prepare_enable() that in particular could cause invocation of clk_disable_unprepare() on clocks that were not prepared/enabled yet, e.g. in remove or on handling errors of usb_add_hcd() in probe. Though, there were several patches fixing different issues with clocks in this driver, they did not solve this problem. Add handling of errors of clk_prepare_enable() in ehci_orion_drv_probe() to avoid calls of clk_disable_unprepare() without previous successful invocation of clk_prepare_enable(). Found by Linux Driver Verification project (linuxtesting.org). Fixes: 8c869edaee07 ("ARM: Orion: EHCI: Add support for enabling clocks") Co-developed-by: Kirill Shilimanov Reviewed-by: Andrew Lunn Acked-by: Alan Stern Signed-off-by: Evgeny Novikov Signed-off-by: Kirill Shilimanov Link: https://lore.kernel.org/r/20210825170902.11234-1-novikov@ispras.ru Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit f0bb63127354dfd03f0c93e63a2b286f455b813e Author: Sergey Shtylyov Date: Sun Jul 4 17:47:54 2021 +0300 i2c: xlp9xx: fix main IRQ check [ Upstream commit 661e8a88e8317eb9ffe69c69d6cb4876370fe7e2 ] Iff platform_get_irq() returns 0 for the main IRQ, the driver's probe() method will return 0 early (as if the method's call was successful). Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always override that decision... Fixes: 2bbd681ba2b ("i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller") Signed-off-by: Sergey Shtylyov Reviewed-by: George Cherian Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 7ac3090e0123680a32d0bceee7ae4d11a64d0e6b Author: Sergey Shtylyov Date: Sun Jul 4 17:38:45 2021 +0300 i2c: mt65xx: fix IRQ check [ Upstream commit 58fb7c643d346e2364404554f531cfa6a1a3917c ] Iff platform_get_irq() returns 0, the driver's probe() method will return 0 early (as if the method's call was successful). Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always override that decision... Fixes: ce38815d39ea ("I2C: mediatek: Add driver for MediaTek I2C controller") Signed-off-by: Sergey Shtylyov Reviewed-by: Qii Wang Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 6c4857203ffa36918136756a889b12c5864bc4ad Author: Len Baker Date: Tue Aug 17 12:27:09 2021 +0200 CIFS: Fix a potencially linear read overflow [ Upstream commit f980d055a0f858d73d9467bb0b570721bbfcdfb8 ] strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated. Also, the strnlen() call does not avoid the read overflow in the strlcpy function when a not NUL-terminated string is passed. So, replace this block by a call to kstrndup() that avoids this type of overflow and does the same. Fixes: 066ce6899484d ("cifs: rename cifs_strlcpy_to_host and make it use new functions") Signed-off-by: Len Baker Reviewed-by: Paulo Alcantara (SUSE) Reviewed-by: Jeff Layton Signed-off-by: Steve French Signed-off-by: Sasha Levin commit b0491ab7d4c7ec44f9ed93298ba11b9aa1e9fd20 Author: Andrey Ignatov Date: Fri Aug 20 09:39:35 2021 -0700 bpf: Fix possible out of bound write in narrow load handling [ Upstream commit d7af7e497f0308bc97809cc48b58e8e0f13887e1 ] Fix a verifier bug found by smatch static checker in [0]. This problem has never been seen in prod to my best knowledge. Fixing it still seems to be a good idea since it's hard to say for sure whether it's possible or not to have a scenario where a combination of convert_ctx_access() and a narrow load would lead to an out of bound write. When narrow load is handled, one or two new instructions are added to insn_buf array, but before it was only checked that cnt >= ARRAY_SIZE(insn_buf) And it's safe to add a new instruction to insn_buf[cnt++] only once. The second try will lead to out of bound write. And this is what can happen if `shift` is set. Fix it by making sure that if the BPF_RSH instruction has to be added in addition to BPF_AND then there is enough space for two more instructions in insn_buf. The full report [0] is below: kernel/bpf/verifier.c:12304 convert_ctx_accesses() warn: offset 'cnt' incremented past end of array kernel/bpf/verifier.c:12311 convert_ctx_accesses() warn: offset 'cnt' incremented past end of array kernel/bpf/verifier.c 12282 12283 insn->off = off & ~(size_default - 1); 12284 insn->code = BPF_LDX | BPF_MEM | size_code; 12285 } 12286 12287 target_size = 0; 12288 cnt = convert_ctx_access(type, insn, insn_buf, env->prog, 12289 &target_size); 12290 if (cnt == 0 || cnt >= ARRAY_SIZE(insn_buf) || ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Bounds check. 12291 (ctx_field_size && !target_size)) { 12292 verbose(env, "bpf verifier is misconfigured\n"); 12293 return -EINVAL; 12294 } 12295 12296 if (is_narrower_load && size < target_size) { 12297 u8 shift = bpf_ctx_narrow_access_offset( 12298 off, size, size_default) * 8; 12299 if (ctx_field_size <= 4) { 12300 if (shift) 12301 insn_buf[cnt++] = BPF_ALU32_IMM(BPF_RSH, ^^^^^ increment beyond end of array 12302 insn->dst_reg, 12303 shift); --> 12304 insn_buf[cnt++] = BPF_ALU32_IMM(BPF_AND, insn->dst_reg, ^^^^^ out of bounds write 12305 (1 << size * 8) - 1); 12306 } else { 12307 if (shift) 12308 insn_buf[cnt++] = BPF_ALU64_IMM(BPF_RSH, 12309 insn->dst_reg, 12310 shift); 12311 insn_buf[cnt++] = BPF_ALU64_IMM(BPF_AND, insn->dst_reg, ^^^^^^^^^^^^^^^ Same. 12312 (1ULL << size * 8) - 1); 12313 } 12314 } 12315 12316 new_prog = bpf_patch_insn_data(env, i + delta, insn_buf, cnt); 12317 if (!new_prog) 12318 return -ENOMEM; 12319 12320 delta += cnt - 1; 12321 12322 /* keep walking new program and skip insns we just inserted */ 12323 env->prog = new_prog; 12324 insn = new_prog->insnsi + i + delta; 12325 } 12326 12327 return 0; 12328 } [0] https://lore.kernel.org/bpf/20210817050843.GA21456@kili/ v1->v2: - clarify that problem was only seen by static checker but not in prod; Fixes: 46f53a65d2de ("bpf: Allow narrow loads with offset > 0") Reported-by: Dan Carpenter Signed-off-by: Andrey Ignatov Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20210820163935.1902398-1-rdna@fb.com Signed-off-by: Sasha Levin commit cfaefbcc6bc4c2bf76b9c9779cf6d6ff95a2fbac Author: Tony Lindgren Date: Tue Aug 10 11:16:44 2021 +0300 mmc: moxart: Fix issue with uninitialized dma_slave_config [ Upstream commit ee5165354d498e5bceb0b386e480ac84c5f8c28c ] Depending on the DMA driver being used, the struct dma_slave_config may need to be initialized to zero for the unused data. For example, we have three DMA drivers using src_port_window_size and dst_port_window_size. If these are left uninitialized, it can cause DMA failures. For moxart, this is probably not currently an issue but is still good to fix though. Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") Cc: Jonas Jensen Cc: Vinod Koul Cc: Peter Ujfalusi Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20210810081644.19353-3-tony@atomide.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin commit ced0bc748185663a94bc5ae69d7f462a63c66080 Author: Tony Lindgren Date: Tue Aug 10 11:16:43 2021 +0300 mmc: dw_mmc: Fix issue with uninitialized dma_slave_config [ Upstream commit c3ff0189d3bc9c03845fe37472c140f0fefd0c79 ] Depending on the DMA driver being used, the struct dma_slave_config may need to be initialized to zero for the unused data. For example, we have three DMA drivers using src_port_window_size and dst_port_window_size. If these are left uninitialized, it can cause DMA failures. For dw_mmc, this is probably not currently an issue but is still good to fix though. Fixes: 3fc7eaef44db ("mmc: dw_mmc: Add external dma interface support") Cc: Shawn Lin Cc: Jaehoon Chung Cc: Peter Ujfalusi Cc: Vinod Koul Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20210810081644.19353-2-tony@atomide.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin commit 8a9f9b97558e85a6bf1b5b8c8240b14bdf5cb500 Author: Tony Lindgren Date: Tue Aug 10 11:16:42 2021 +0300 mmc: sdhci: Fix issue with uninitialized dma_slave_config [ Upstream commit 522654d534d315d540710124c57b49ca22ac5f72 ] Depending on the DMA driver being used, the struct dma_slave_config may need to be initialized to zero for the unused data. For example, we have three DMA drivers using src_port_window_size and dst_port_window_size. If these are left uninitialized, it can cause DMA failures at least if external TI SDMA is ever configured for sdhci. For other external DMA cases, this is probably not currently an issue but is still good to fix though. Fixes: 18e762e3b7a7 ("mmc: sdhci: add support for using external DMA devices") Cc: Adrian Hunter Cc: Chunyan Zhang Cc: Faiz Abbas Cc: Peter Ujfalusi Cc: Vinod Koul Signed-off-by: Tony Lindgren Acked-by: Adrian Hunter Reviewed-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20210810081644.19353-1-tony@atomide.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin commit dd903083cbe433b56e7998d3e855b77f4b17eb01 Author: Cezary Rojewski Date: Wed Aug 18 09:57:35 2021 +0200 ASoC: Intel: Skylake: Fix module resource and format selection [ Upstream commit e8b374b649afe756c2470e0e6668022e90bf8518 ] Module configuration may differ between its instances depending on resources required and input and output audio format. Available parameters to select from are stored in module resource and interface (format) lists. These come from topology, together with description of each of pipe's modules. Ignoring index value provided by topology and relying always on 0th entry leads to unexpected module behavior due to under/overbudged resources assigned or impropper format selection. Fix by taking entry at index specified by topology. Fixes: f6fa56e22559 ("ASoC: Intel: Skylake: Parse and update module config structure") Signed-off-by: Cezary Rojewski Tested-by: Lukasz Majczak Link: https://lore.kernel.org/r/20210818075742.1515155-5-cezary.rojewski@intel.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit b0159dbd1dd6011befed7c125ca7d2690f24b7d4 Author: Cezary Rojewski Date: Wed Aug 18 09:57:33 2021 +0200 ASoC: Intel: Skylake: Leave data as is when invoking TLV IPCs [ Upstream commit 126b3422adc80f29d2129db7f61e0113a8a526c6 ] Advancing pointer initially fixed issue for some users but caused regression for others. Leave data as it to make it easier for end users to adjust their topology files if needed. Fixes: a8cd7066f042 ("ASoC: Intel: Skylake: Strip T and L from TLV IPCs") Signed-off-by: Cezary Rojewski Tested-by: Lukasz Majczak Link: https://lore.kernel.org/r/20210818075742.1515155-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 7934c79fb0ed6ca4a282f44ca1e1424d74438f39 Author: Cezary Rojewski Date: Wed Aug 18 09:57:32 2021 +0200 ASoC: Intel: kbl_da7219_max98927: Fix format selection for max98373 [ Upstream commit 6d41bbf2fd3615c56dbf2b67f6cbf9e83d14a2e2 ] Contrary to what is said in board's file, topology targeting kbl_da7219_max98373 expects format 16b, not 24/32b. Partially revert changes added in 'ASoC: Intel: Boards: Add Maxim98373 support' to bring old behavior back, aligning with topology expectations. Fixes: 716d53cc7837 ("ASoC: Intel: Boards: Add Maxim98373 support") Signed-off-by: Cezary Rojewski Tested-by: Lukasz Majczak Link: https://lore.kernel.org/r/20210818075742.1515155-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 56d976f45000f0b8fec0611baf9e3af6c58fc177 Author: Dan Carpenter Date: Mon Aug 16 21:39:47 2021 +0300 rsi: fix an error code in rsi_probe() [ Upstream commit 9adcdf6758d7c4c9bdaf22d78eb9fcae260ed113 ] Return -ENODEV instead of success for unsupported devices. Fixes: 54fdb318c111 ("rsi: add new device model for 9116") Signed-off-by: Dan Carpenter Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210816183947.GA2119@kili Signed-off-by: Sasha Levin commit 110ce7d256a34489e340bfa27f12cda94ab1f751 Author: Dan Carpenter Date: Thu Aug 5 13:37:46 2021 +0300 rsi: fix error code in rsi_load_9116_firmware() [ Upstream commit d0f8430332a16c7baa80ce2886339182c5d85f37 ] This code returns success if the kmemdup() fails, but obviously it should return -ENOMEM instead. Fixes: e5a1ecc97e5f ("rsi: add firmware loading for 9116 device") Signed-off-by: Dan Carpenter Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210805103746.GA26417@kili Signed-off-by: Sasha Levin commit b4bbb77d886b4d3b5915593a9d97a0d3da82ff8d Author: Bob Peterson Date: Fri May 14 07:42:33 2021 -0500 gfs2: init system threads before freeze lock [ Upstream commit a28dc123fa66ba7f3eca7cffc4b01d96bfd35c27 ] Patch 96b1454f2e ("gfs2: move freeze glock outside the make_fs_rw and _ro functions") changed the gfs2 mount sequence so that it holds the freeze lock before calling gfs2_make_fs_rw. Before this patch, gfs2_make_fs_rw called init_threads to initialize the quotad and logd threads. That is a problem if the system needs to withdraw due to IO errors early in the mount sequence, for example, while initializing the system statfs inode: 1. An IO error causes the statfs glock to not sync properly after recovery, and leaves items on the ail list. 2. The leftover items on the ail list causes its do_xmote call to fail, which makes it want to withdraw. But since the glock code cannot withdraw (because the withdraw sequence uses glocks) it relies upon the logd daemon to initiate the withdraw. 3. The withdraw can never be performed by the logd daemon because all this takes place before the logd daemon is started. This patch moves function init_threads from super.c to ops_fstype.c and it changes gfs2_fill_super to start its threads before holding the freeze lock, and if there's an error, stop its threads after releasing it. This allows the logd to run unblocked by the freeze lock. Thus, the logd daemon can perform its withdraw sequence properly. Fixes: 96b1454f2e8e ("gfs2: move freeze glock outside the make_fs_rw and _ro functions") Signed-off-by: Bob Peterson Signed-off-by: Sasha Levin commit ee029e3aa129572437c2d45082d5555d0ba7eb42 Author: Sergey Shtylyov Date: Sun Jul 4 17:35:54 2021 +0300 i2c: hix5hd2: fix IRQ check [ Upstream commit f9b459c2ba5edfe247e86b45ad5dea8da542f3ea ] Iff platform_get_irq() returns 0, the driver's probe() method will return 0 early (as if the method's call was successful). Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always override that decision... Fixes: 15ef27756b23 ("i2c: hix5hd2: add i2c controller driver") Signed-off-by: Sergey Shtylyov Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit d36ab9b3ee495c984d7a700566879bd69835f61d Author: Tian Tao Date: Fri Dec 25 16:40:06 2020 +0800 i2c: fix platform_get_irq.cocci warnings [ Upstream commit 2478b9c1dcc9aa84cfd71ed7b5ca2a2c0ede75b7 ] Remove dev_err() messages after platform_get_irq*() failures. drivers/i2c/busses/i2c-hix5hd2.c:417:2-9: line 417 is redundant because platform_get_irq() already prints an error Signed-off-by: Tian Tao Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 187705a4b1fa05e3368a95b0dbfa4469ec84a490 Author: Sergey Shtylyov Date: Sun Jul 4 17:45:25 2021 +0300 i2c: s3c2410: fix IRQ check [ Upstream commit d6840a5e370b7ea4fde16ce2caf431bcc87f9a75 ] Iff platform_get_irq() returns 0, the driver's probe() method will return 0 early (as if the method's call was successful). Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always override that decision... Fixes: e0d1ec97853f ("i2c-s3c2410: Change IRQ to be plain integer.") Signed-off-by: Sergey Shtylyov Reviewed-by: Krzysztof Kozlowski Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 3913fa307a33921e5caf74616ada55d15052cf72 Author: Sergey Shtylyov Date: Thu Aug 12 23:35:09 2021 +0300 i2c: iop3xx: fix deferred probing [ Upstream commit a1299505162ad00def3573260c2c68b9c8e8d697 ] When adding the code to handle platform_get_irq*() errors in the commit 489447380a29 ("handle errors returned by platform_get_irq*()"), the actual error code was enforced to be -ENXIO in the driver for some strange reason. This didn't matter much until the deferred probing was introduced -- which requires an actual error code to be propagated upstream from the failure site. While fixing this, also stop overriding the errors from request_irq() to -EIO (done since the pre-git era). Fixes: 489447380a29 ("[PATCH] handle errors returned by platform_get_irq*()") Signed-off-by: Sergey Shtylyov Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 50e6f34499a548a9ebe43a36d2c85915e95cc3d8 Author: Pavel Skripkin Date: Thu Aug 19 18:15:21 2021 +0300 Bluetooth: add timeout sanity check to hci_inquiry [ Upstream commit f41a4b2b5eb7872109723dab8ae1603bdd9d9ec1 ] Syzbot hit "task hung" bug in hci_req_sync(). The problem was in unreasonable huge inquiry timeout passed from userspace. Fix it by adding sanity check for timeout value to hci_inquiry(). Since hci_inquiry() is the only user of hci_req_sync() with user controlled timeout value, it makes sense to check timeout value in hci_inquiry() and don't touch hci_req_sync(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+be2baed593ea56c6a84c@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin commit cc59ad70cfb654c6fa3acc07db21d2231c9ffce9 Author: Kevin Mitchell Date: Wed Aug 18 19:29:39 2021 -0700 lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ [ Upstream commit d1f278da6b11585f05b2755adfc8851cbf14a1ec ] When scsi_dispatch_cmd was moved to scsi_lib.c and made static, some compilers (i.e., at least gcc 8.4.0) decided to compile this inline. This is a problem for lkdtm.ko, which inserted a kprobe on this function for the SCSI_DISPATCH_CMD crashpoint. Move this crashpoint one function up the call chain to scsi_queue_rq. Though this is also a static function, it should never be inlined because it is assigned as a structure entry. Therefore, kprobe_register should always be able to find it. Fixes: 82042a2cdb55 ("scsi: move scsi_dispatch_cmd to scsi_lib.c") Acked-by: Kees Cook Signed-off-by: Kevin Mitchell Link: https://lore.kernel.org/r/20210819022940.561875-2-kevmitch@arista.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 9295566a136cc26a3f6166eff6e2f5525432f73b Author: Xu Yu Date: Wed Aug 18 12:47:52 2021 -0700 mm/swap: consider max pages in iomap_swapfile_add_extent [ Upstream commit 36ca7943ac18aebf8aad4c50829eb2ea5ec847df ] When the max pages (last_page in the swap header + 1) is smaller than the total pages (inode size) of the swapfile, iomap_swapfile_activate overwrites sis->max with total pages. However, frontswap_map is a swap page state bitmap allocated using the initial sis->max page count read from the swap header. If swapfile activation increases sis->max, it's possible for the frontswap code to walk off the end of the bitmap, thereby corrupting kernel memory. [djwong: modify the description a bit; the original paragraph reads: "However, frontswap_map is allocated using max pages. When test and clear the sis offset, which is larger than max pages, of frontswap_map in __frontswap_invalidate_page(), neighbors of frontswap_map may be overwritten, i.e., slab is polluted." Note also that this bug resulted in a behavioral change: activating a swap file that was formatted and later extended results in all pages being activated, not the number of pages recorded in the swap header.] This fixes the issue by considering the limitation of max pages of swap info in iomap_swapfile_add_extent(). To reproduce the case, compile kernel with slub RED ZONE, then run test: $ sudo stress-ng -a 1 -x softlockup,resources -t 72h --metrics --times \ --verify -v -Y /root/tmpdir/stress-ng/stress-statistic-12.yaml \ --log-file /root/tmpdir/stress-ng/stress-logfile-12.txt \ --temp-path /root/tmpdir/stress-ng/ We'll get the error log as below: [ 1151.015141] ============================================================================= [ 1151.016489] BUG kmalloc-16 (Not tainted): Right Redzone overwritten [ 1151.017486] ----------------------------------------------------------------------------- [ 1151.017486] [ 1151.018997] Disabling lock debugging due to kernel taint [ 1151.019873] INFO: 0x0000000084e43932-0x0000000098d17cae @offset=7392. First byte 0x0 instead of 0xcc [ 1151.021303] INFO: Allocated in __do_sys_swapon+0xcf6/0x1170 age=43417 cpu=9 pid=3816 [ 1151.022538] __slab_alloc+0xe/0x20 [ 1151.023069] __kmalloc_node+0xfd/0x4b0 [ 1151.023704] __do_sys_swapon+0xcf6/0x1170 [ 1151.024346] do_syscall_64+0x33/0x40 [ 1151.024925] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1151.025749] INFO: Freed in put_cred_rcu+0xa1/0xc0 age=43424 cpu=3 pid=2041 [ 1151.026889] kfree+0x276/0x2b0 [ 1151.027405] put_cred_rcu+0xa1/0xc0 [ 1151.027949] rcu_do_batch+0x17d/0x410 [ 1151.028566] rcu_core+0x14e/0x2b0 [ 1151.029084] __do_softirq+0x101/0x29e [ 1151.029645] asm_call_irq_on_stack+0x12/0x20 [ 1151.030381] do_softirq_own_stack+0x37/0x40 [ 1151.031037] do_softirq.part.15+0x2b/0x30 [ 1151.031710] __local_bh_enable_ip+0x4b/0x50 [ 1151.032412] copy_fpstate_to_sigframe+0x111/0x360 [ 1151.033197] __setup_rt_frame+0xce/0x480 [ 1151.033809] arch_do_signal+0x1a3/0x250 [ 1151.034463] exit_to_user_mode_prepare+0xcf/0x110 [ 1151.035242] syscall_exit_to_user_mode+0x27/0x190 [ 1151.035970] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1151.036795] INFO: Slab 0x000000003b9de4dc objects=44 used=9 fp=0x00000000539e349e flags=0xfffffc0010201 [ 1151.038323] INFO: Object 0x000000004855ba01 @offset=7376 fp=0x0000000000000000 [ 1151.038323] [ 1151.039683] Redzone 000000008d0afd3d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ [ 1151.041180] Object 000000004855ba01: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 1151.042714] Redzone 0000000084e43932: 00 00 00 c0 cc cc cc cc ........ [ 1151.044120] Padding 000000000864c042: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [ 1151.045615] CPU: 5 PID: 3816 Comm: stress-ng Tainted: G B 5.10.50+ #7 [ 1151.046846] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 1151.048633] Call Trace: [ 1151.049072] dump_stack+0x57/0x6a [ 1151.049585] check_bytes_and_report+0xed/0x110 [ 1151.050320] check_object+0x1eb/0x290 [ 1151.050924] ? __x64_sys_swapoff+0x39a/0x540 [ 1151.051646] free_debug_processing+0x151/0x350 [ 1151.052333] __slab_free+0x21a/0x3a0 [ 1151.052938] ? _cond_resched+0x2d/0x40 [ 1151.053529] ? __vunmap+0x1de/0x220 [ 1151.054139] ? __x64_sys_swapoff+0x39a/0x540 [ 1151.054796] ? kfree+0x276/0x2b0 [ 1151.055307] kfree+0x276/0x2b0 [ 1151.055832] __x64_sys_swapoff+0x39a/0x540 [ 1151.056466] do_syscall_64+0x33/0x40 [ 1151.057084] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1151.057866] RIP: 0033:0x150340b0ffb7 [ 1151.058481] Code: Unable to access opcode bytes at RIP 0x150340b0ff8d. [ 1151.059537] RSP: 002b:00007fff7f4ee238 EFLAGS: 00000246 ORIG_RAX: 00000000000000a8 [ 1151.060768] RAX: ffffffffffffffda RBX: 00007fff7f4ee66c RCX: 0000150340b0ffb7 [ 1151.061904] RDX: 000000000000000a RSI: 0000000000018094 RDI: 00007fff7f4ee860 [ 1151.063033] RBP: 00007fff7f4ef980 R08: 0000000000000000 R09: 0000150340a672bd [ 1151.064135] R10: 00007fff7f4edca0 R11: 0000000000000246 R12: 0000000000018094 [ 1151.065253] R13: 0000000000000005 R14: 000000000160d930 R15: 00007fff7f4ee66c [ 1151.066413] FIX kmalloc-16: Restoring 0x0000000084e43932-0x0000000098d17cae=0xcc [ 1151.066413] [ 1151.067890] FIX kmalloc-16: Object at 0x000000004855ba01 not freed Fixes: 67482129cdab ("iomap: add a swapfile activation function") Fixes: a45c0eccc564 ("iomap: move the swapfile code into a separate file") Signed-off-by: Gang Deng Signed-off-by: Xu Yu Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Signed-off-by: Sasha Levin commit a9c29bc2a5780a6389c501d42b70a67d1b1818fc Author: Nadezda Lutovinova Date: Wed Aug 18 17:12:47 2021 +0300 usb: gadget: mv_u3d: request_irq() after initializing UDC [ Upstream commit 2af0c5ffadaf9d13eca28409d4238b4e672942d3 ] If IRQ occurs between calling request_irq() and mv_u3d_eps_init(), then null pointer dereference occurs since u3d->eps[] wasn't initialized yet but used in mv_u3d_nuke(). The patch puts registration of the interrupt handler after initializing of neccesery data. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers") Acked-by: Felipe Balbi Signed-off-by: Nadezda Lutovinova Link: https://lore.kernel.org/r/20210818141247.4794-1-lutovinova@ispras.ru Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit b2f4dd13b211691715e99e28fff9ce9557acc57c Author: Christophe JAILLET Date: Fri Aug 6 08:46:11 2021 +0200 firmware: raspberrypi: Fix a leak in 'rpi_firmware_get()' [ Upstream commit 09cbd1df7d2615c19e40facbe31fdcb5f1ebfa96 ] The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the normal and error handling paths. Fixes: 4e3d60656a72 ("ARM: bcm2835: Add the Raspberry Pi firmware driver") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/5e17e5409b934cd08bf6f9279c73be5c1cb11cce.1628232242.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 60831f5ae6c713afceb6d29f40899ed112f36059 Author: Nicolas Saenz Julienne Date: Mon Jan 18 13:32:34 2021 +0100 firmware: raspberrypi: Keep count of all consumers [ Upstream commit 1e7c57355a3bc617fc220234889e49fe722a6305 ] When unbinding the firmware device we need to make sure it has no consumers left. Otherwise we'd leave them with a firmware handle pointing at freed memory. Keep a reference count of all consumers and introduce rpi_firmware_put() which will permit automatically decrease the reference count upon unbinding consumer drivers. Suggested-by: Uwe Kleine-König Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli Reviewed-by: Stephen Boyd Reviewed-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 5c68b7795b4c7bdbd54148c9343b5a5edeb476d7 Author: Sergey Shtylyov Date: Thu Aug 12 23:39:11 2021 +0300 i2c: synquacer: fix deferred probing [ Upstream commit 8d744da241b81f4211f4813b0d3c1981326fa9ca ] The driver overrides the error codes returned by platform_get_irq() to -ENODEV, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the error codes upstream. Fixes: 0d676a6c4390 ("i2c: add support for Socionext SynQuacer I2C controller") Signed-off-by: Sergey Shtylyov Acked-by: Ard Biesheuvel Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit f577e9f58ff079a61af08fae75b76cb8cc0c3057 Author: Lukas Bulwahn Date: Tue Aug 17 12:54:04 2021 +0200 clk: staging: correct reference to config IOMEM to config HAS_IOMEM [ Upstream commit cbfa6f33e3a685c329d78e06b0cf1dcb23c9d849 ] Commit 0a0a66c984b3 ("clk: staging: Specify IOMEM dependency for Xilinx Clocking Wizard driver") introduces a dependency on the non-existing config IOMEM, which basically makes it impossible to include this driver into any build. Fortunately, ./scripts/checkkconfigsymbols.py warns: IOMEM Referencing files: drivers/staging/clocking-wizard/Kconfig The config for IOMEM support is called HAS_IOMEM. Correct this reference to the intended config. Fixes: 0a0a66c984b3 ("clk: staging: Specify IOMEM dependency for Xilinx Clocking Wizard driver") Signed-off-by: Lukas Bulwahn Link: https://lore.kernel.org/r/20210817105404.13146-1-lukas.bulwahn@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 5ae5f087c9d6cef2178981269418324ced377763 Author: Pali Rohár Date: Thu Jun 24 23:55:46 2021 +0200 arm64: dts: marvell: armada-37xx: Extend PCIe MEM space [ Upstream commit 514ef1e62d6521c2199d192b1c71b79d2aa21d5a ] Current PCIe MEM space of size 16 MB is not enough for some combination of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted Firmware for Armada 3700 platform already assigns 128 MB for PCIe window, so extend PCIe MEM space to the end of 128 MB PCIe window which allows to allocate more PCIe BARs for more PCIe cards. Without this change some combination of PCIe cards cannot be used and kernel show error messages in dmesg during initialization: pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000] pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000] pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref] pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000] pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000] pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000] pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000] pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000] pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000] pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit] pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit] Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot crashes during loading of kernel DTB file. This bug is present only in U-Boot code for Turris Mox and therefore other Armada 3700 devices are not affected by this bug. Bug is fixed in U-Boot version 2021.07. To not break booting new kernels on existing versions of U-Boot on Turris Mox, use first 16 MB range for IO and second range with rest of PCIe window for MEM. Signed-off-by: Pali Rohár Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700") Signed-off-by: Gregory CLEMENT Signed-off-by: Sasha Levin commit cb788d698a10ab6a572653a0b3ae3133518a0eee Author: J. Bruce Fields Date: Thu Aug 12 16:41:43 2021 -0400 nfsd4: Fix forced-expiry locking [ Upstream commit f7104cc1a9159cd0d3e8526cb638ae0301de4b61 ] This should use the network-namespace-wide client_lock, not the per-client cl_lock. You shouldn't see any bugs unless you're actually using the forced-expiry interface introduced by 89c905beccbb. Fixes: 89c905beccbb "nfsd: allow forced expiration of NFSv4 clients" Signed-off-by: J. Bruce Fields