PLmixed: An Introduction

Nicholas Rockwood ()
Minjeong Jeon, University of California, Los Angeles ()

The purpose of PLmixed is to extend the capabilities of lme4 (Bates et al. 2015) to allow factor structures (i.e., factor loadings, weights, discrimination parameters) to be freely estimated. Thus, for instance, factor analysis and item response theory models with multiple hierarchical levels and/or crossed random effects can be estimated using code that requires little more input than that required by lme4. All of the strengths of lme4, including the ability to add (possibly random) covariates and an arbitrary number of crossed random effects, are encompassed within PLmixed. In fact, PLmixed uses lme4 and optim (Byrd et al. 1995) to estimate the model using nested maximizations. Details of this approach can be found in Jeon and Rabe-Hesketh (2012). Rockwood and Jeon (2019) provide more details regarding the use of PLmixed.

Installation

PLmixed can be installed from CRAN with:

install.packages("PLmixed")

KYPS Example

Once loaded, PLmixed can be called using the function PLmixed. Following is an example using a dataset simulated from a PLmixed model fit using data from the Korean Youth Panel Survey (KYPS), where students’ self-esteem was measured over four time points. The first two time points occurred when the students were in middle school, and the final two time points occurred during high school. Further details about the original dataset can be found in Jeon and Rabe-Hesketh (2012), which includes the original analysis for this example. The first six rows of the dataset KYPSsim, which can be found in the PLmixed package, is displayed below.

library("PLmixed")
head(KYPSsim)
##   mid hid sid time   esteem
## 1   1   1   1    1 2.759234
## 2   1   1   1    2 2.980368
## 3   1   1   1    3 3.130784
## 4   1   1   1    4 3.310306
## 5   2   1   2    1 2.924520
## 6   2   1   2    2 2.997440

The interest of the analysis is on modeling the effect of middle school and high school membership on the students’ self-esteem over time. Specifically, we model the self-esteem at time \(t\) from students \(s\) who attended middle school \(m\) and high school \(h\) as \[ y_{tsmh} = \beta_t + \lambda_t^{(m)}\eta^{(m)} + \lambda_t^{(h)}\eta^{(h)} + \eta^{(s)} + \epsilon_{tsmh} \] where \(\beta_t\) are fixed time effects, \(\eta^{(m)} \sim N(0, \psi^2_m)\), \(\eta^{(h)} \sim N(0, \psi^2_h)\), \(\eta^{(s)} \sim N(0, \psi^2_s)\), and \(\epsilon_{itsmh} \sim N(0, \sigma^2_{\epsilon})\). Additional covariates with fixed or random effects can also be included in the model. In this formulation, the middle school and high school effects are cross-classified random effects with time-dependent weights \(\lambda_t^{(m)}\) and \(\lambda_t^{(h)}\), respectively. For example, \(\lambda_1^{(m)}\) quantifies the relationship between the middle school factor and students’ self-esteem at time one. Values close to zero would indicate that there is little effect of middle school membership on self-esteem at this time point. As a standard GLMM, these time dependent weights would have to be known a priori. If known, the model could be estimated using the lmer function from lme4 as lmer(esteem ~ as.factor(time) + (0 + ms_weight | mid) + (0 + hs_weight | hid) + (1 | sid), data = KYPSsim), where ms_weight and hs_weight are known covariates containing the middle school and high school weights.

In constrast, PLmixed allows these weights to be freely estimated. To do so, we must specify a lambda matrix, which will contain the factor structure. For this example, we need a separate loading for each factor (ms and hs) at each time point. We can check the unique time points in the dataset:

unique(KYPSsim$time)
## [1] 1 2 3 4

Thus, the lambda matrix needs 4 rows and 2 columns (time x factors). Following the analysis of Jeon and Rabe-Hesketh (2012), it is assumed that high school membership does not influence self-esteem at the middle school time points (times 1 and 2), so these loadings are constrained to zero. Further, the first non-zero loading for each factor is constrained to one to identify the model, since the variances of the factors will be freely estimated.

kyps.lam <- rbind(c( 1,  0),
                  c(NA,  0),
                  c(NA,  1),
                  c(NA, NA))

Here, the NAs are used to specify loadings that should be freely estimated. The numbers are constraints. Thus, the first loading for the first factor is constrainted to one, and the other three are freely esitmated. The first two loadings of the second factor are constrained to zero, the third is constrained to one, and the fourth is freely estimated.

We fit the model in PLmixed using

 kyps.model <- PLmixed(esteem ~ as.factor(time) +  (0 + hs | hid)   
                       + (0 + ms | mid) + (1 | sid), data = KYPSsim,  
                       factor = list(c("ms", "hs")), load.var = "time",
                       lambda = list(kyps.lam))

This follows a similar syntax as that for lme4 except we’ve included the lambda matrix we previously constructed, a factor argument, and a load.var argument. load.var contains the name of the variable in which the factor loadings correspond to (i. e., the variable that identifies the rows in lambda). If there is more than one load.var, these are provided in a character vector. The factor argument names the factors corresponding to the columns of lambda. Here, we specify ms and hs, corresponding to middle school and high school factors. They are provided in the same order as the columns of lambda. Note that these are specified in the same character vector within a list. If there is more than one matrix listed for lambda, there should be multiple character vectors listed for factor, where each character vector corresponds to each lambda matrix. Finally, any factors specified using factor can be included as random effects within the PLmixed formula. Here we have included hs as a random effect (i.e. factor) that varies over hid, and ms is a random effect that varies over mid.

The parameter estimates can be found using summary().

summary(kyps.model)
## Profile-based Mixed Effect Model Fit With PLmixed Using lme4 
## Formula:  esteem ~ as.factor(time) + (0 + hs | hid) + (0 + ms | mid) +      (1 | sid) 
## Data:  KYPSsim 
##  Family: gaussian  ( identity )
## 
##      AIC      BIC   logLik deviance df.resid 
## 19387.97 19476.17 -9681.99 19363.97    11482 
## 
## Scaled residuals: 
##     Min      1Q  Median      3Q     Max 
## -3.7952 -0.5945  0.0028  0.6049  3.5753 
## 
## Lambda:  time 
##        ms     SE    hs    SE
## 1 1.00000      .     .     .
## 2 0.87514 0.1421     .     .
## 3 0.04438 0.1496 1.000     .
## 4 0.02100 0.1543 1.502 0.504
## 
## Random effects:
##  Groups   Name        Variance Std.Dev.
##  sid      (Intercept) 0.151749 0.38955 
##  hid      hs          0.005253 0.07248 
##  mid      ms          0.010696 0.10342 
##  Residual             0.222511 0.47171 
## Number of obs: 11494, groups:  sid, 2924; hid, 860; mid, 104
##  
## Fixed effects: 
##                    Beta      SE t value
## (Intercept)      3.1479 0.01523 206.625
## as.factor(time)2 0.1184 0.01253   9.451
## as.factor(time)3 0.1534 0.01607   9.548
## as.factor(time)4 0.1924 0.01675  11.491
## 
## lme4 Optimizer:  bobyqa 
## Optim Optimizer:  L-BFGS-B 
## Optim Iterations:  287 
## Estimation Time:  0.85 minutes

The summary contains all of the usual lme4 output, as well as the estimated lambda matrix and some details corresponding to the estimation at the bottom. Looking at the lambda matrix, we see that the middle school effect decreased over time, while the high school effect increased from time three to time four. The fixed effects section contains the estimated mean self-esteem score for students at time 1, as well as mean differences between the other three time points and time one. On average, self-esteem scores increased over time.

Multilevel 2PL IRT Example

Following is an example using the dataset IRTsim available within the package. The dataset contains 4 variables and a total of 2500 item responses. sid is a student ID (\(n_{sid} = 500\)), school is a school ID (\(n_{school} = 26\)), item is an item ID, and y is a dichotmous response to the item. The dataset was simulated using the parameter estimates from a fitted multilevel 2PL IRT model. Further details corresponding to the data generation will be found in our in-preparation paper.

library("PLmixed")
head(IRTsim)
##     sid school item y
## 1.1   1      1    1 1
## 1.2   1      1    2 1
## 1.3   1      1    3 1
## 1.4   1      1    4 0
## 1.5   1      1    5 1
## 2.1   2      1    1 1

We are interested in estimating a common factor, or latent variable, that varies at the student and school level. This is a three level model, as item responses are nested within students, which are nested within schools. With the constraint that all factor loadings equal one, the model can be estimated using the lme4 package, with the code [g]lmer(y ~ 0 + as.factor(item) + (1 | sid) + (1 | school),... where the latent ability is operationalized as a random intercept which varies at the student and school levels. This corresponds to: \[ g(\mu_{spi}) = \beta_i + \theta_p + \theta_s \] where \(g(.)\) is a link function, \(\mu_{spi}\) is the conditional mean response of person \(p\) in school \(s\) to item \(i\), \(\theta_p \sim N(0, \psi^2_{p})\) is a student-level random effect/factor and \(\theta_s \sim N(0, \psi^2_{s})\) is a school-level random effect/factor.This is a multilevel 1PL IRT model because the factor loadings for \(\theta_p\) and \(\theta_s\) are constrained to one.

A multilevel 2PL IRT model with equal factor loadings (for the student and school factors) based on measurement invariance can be expressed as \[ g(\mu_{spi}) = \beta_i + \lambda_i(\theta_p + \theta_s) \] \[ = \beta_i + \lambda_i\theta_p + \lambda_i\theta_s. \]

PLmixed can also allow for the factor loadings at each level to be freely estimated to test for measurement invariance, but for the purpose of this example we will be working under the assumption that the loadings are equal across the two levels. To begin, we identify the number of items in the dataset.

IRTsim <- IRTsim[order(IRTsim$item), ] # Order by item
unique(IRTsim$item)
## [1] 1 2 3 4 5

Since there are five items and only one factor of interest (which varies at two levels), we can set up the factor loading matrix, lambda, as a vector of length 5. The first loading is constrained to one for identification purposes since the variances of the random effects will be estimated. The other loadings are freely estimated, as specified using NA.

irt.lam = c(1, NA, NA, NA, NA) # Specify the lambda matrix

We use the load.var command to specify what each element of lambda corresponds to. Since there is a separate loading for each item, the item identification variable is used. The lambda argument specifies a list of lambda matrices. For this example, there is only one matrix. The factor argument names each of the factors that are being modeled. There is only one factor in this model, which corresponds to the first (and only) column of the first (and only) lambda matrix, so it is listed in the first element of the first character vector privided in a list for the factor argument. We name this factor ability and replace the random intercepts in the model formula with the factor (and omit the intercepts using 0 +). We also add the argument family = binomial, which will result in the binomial family with a logit link function being used (by default). This option is more appropriate for this example since the item responses are dichotomous and we are interested in a 2-parameter logistic IRT model. The fitted model is saved into the object irt.model.

irt.model <- PLmixed(y ~ 0 + as.factor(item) + (0 + ability | sid) + (0 + ability | school),
                     data = IRTsim, load.var = c("item"), family = binomial,
                     factor = list(c("ability")), lambda = list(irt.lam))
summary(irt.model)
## Profile-based Mixed Effect Model Fit With PLmixed Using lme4 
## Formula:  y ~ 0 + as.factor(item) + (0 + ability | sid) + (0 + ability |      school) 
## Data:  IRTsim 
##  Family: binomial  ( logit )
## 
##      AIC      BIC   logLik deviance df.resid 
##  2966.41  3030.48 -1472.21  2372.59     2489 
## 
## Scaled residuals: 
##     Min      1Q  Median      3Q     Max 
## -2.1136 -0.9281  0.5786  0.8107  2.1562 
## 
## Lambda:  item 
##   ability     SE
## 1  1.0000      .
## 2  0.7370 0.1455
## 3  0.9351 0.1872
## 4  0.6069 0.1260
## 5  0.5860 0.1163
## 
## Random effects:
##  Groups Name    Variance Std.Dev.
##  sid    ability 1.464    1.210   
##  school ability 1.298    1.139   
## Number of obs: 2500, groups:  sid, 500; school, 26
##  
## Fixed effects: 
##                     Beta     SE z value  Pr(>|z|)
## as.factor(item)1 0.51068 0.2606  1.9597 5.003e-02
## as.factor(item)2 0.83550 0.2070  4.0361 5.435e-05
## as.factor(item)3 0.06387 0.2424  0.2635 7.921e-01
## as.factor(item)4 1.00303 0.1826  5.4920 3.975e-08
## as.factor(item)5 0.96871 0.1780  5.4429 5.241e-08
## 
## lme4 Optimizer:  bobyqa 
## Optim Optimizer:  L-BFGS-B 
## Optim Iterations:  233 
## Estimation Time:  1.11 minutes

Within the (extended) GLMM formulation, the model is specified as \(\beta_i + \lambda_i\theta_p\), where \(\beta_i\) is the intercept for item \(i\), \(\lambda_i\) is the loading for item \(i\), and \(\theta_p\) is the person ability level for person \(p\). To transform the item intercepts into item difficulty parameters from the parameterization \(\lambda_i(\theta_p - \beta_i^*)\), we can calculate \(\beta_i^* = -\beta_i/\lambda_i\) for each item.

betas <- irt.model$'Fixed Effects'[, 1]
lambdas <- irt.model$Lambda$lambda.item[, 1]
(beta.difficulty <- -betas/lambdas)
## as.factor(item)1 as.factor(item)2 as.factor(item)3 as.factor(item)4 
##      -0.51068114      -1.13368893      -0.06830801      -1.65276948 
## as.factor(item)5 
##      -1.65312154

We can easily plot the item characteristic curves using the irtoys package (Partchev 2016). The item characteristic curve plots the predicted probability of a correct response (\(y\)-axis) to a given item (or set of items) for a range of ability levels (\(x\)-axis).

library("irtoys")
## Warning: package 'ltm' was built under R version 4.0.5
## Warning: package 'polycor' was built under R version 4.0.5
item.params <- cbind(lambdas, beta.difficulty, rep(0, 5))
plot(irf(item.params), co = NA, label = TRUE)

References

Bates, Douglas, Martin Mächler, Ben Bolker, and Steve Walker. 2015. “Fitting Linear Mixed-Effects Models Using lme4.” Journal of Statistical Software 67 (1): 1–48. https://doi.org/10.18637/jss.v067.i01.

Byrd, Richard H, Peihuang Lu, Jorge Nocedal, and Ciyou Zhu. 1995. “A Limited Memory Algorithm for Bound Constrained Optimization.” SIAM Journal on Scientific Computing 16 (5). SIAM: 1190–1208.

Jeon, Minjeong, and Sophia Rabe-Hesketh. 2012. “Profile-Likelihood Approach for Estimating Generalized Linear Mixed Models with Factor Structures.” Journal of Educational and Behavioral Statistics 37 (4). SAGE Publications Sage CA: Los Angeles, CA: 518–42.

Partchev, Ivailo. 2016. Irtoys: A Collection of Functions Related to Item Response Theory (Irt). https://CRAN.R-project.org/package=irtoys.

R Core Team. 2017. R: A Language and Environment for Statistical Computing. Vienna, Austria: R Foundation for Statistical Computing. https://www.R-project.org/.

Rockwood, Nicholas J, and Minjeong Jeon. 2019. “Estimating Complex Measurement and Growth Models Using the R Package Plmixed.” Multivariate Behavioral Research 54 (2). Taylor & Francis: 288–306.